Plasma-assisted slow-wave oscillators (pasotrons) operate without external magnetic fields, which makes these devices quite compact and lightweight. Beam focusing in pasotrons is provided by ions, which appear in the device due to the impact ionization of a neutral gas by beam electrons. Typically, the ionization time is on the order of the rise time of the beam current. This means that, during the rise of the current, beam focusing by ions becomes stronger. Correspondingly, a beam of electrons, which was initially diverging radially due to the self-electric field, starts to be focused by ions, and this focus moves towards the gun as the ion density increases. This feature makes the self-excitation of electromagnetic (em) oscillations in pasotrons quite different from practically all other microwave sources where em oscillations are excited by a stationary electron beam. The process of self-excitation of em oscillations has been studied both theoretically and experimentally. It is shown that in pasotrons, during the beam current rise the amount of current entering the interaction space and the beam coupling to the em field vary. As a result, the self-excitation can proceed faster than in conventional microwave sources with similar operating parameters such as the operating frequency, cavity quality-factor and the beam current and voltage.

Download full-text PDF

Source
http://dx.doi.org/10.1103/PhysRevE.70.046501DOI Listing

Publication Analysis

Top Keywords

beam current
12
beam
10
plasma-assisted slow-wave
8
slow-wave oscillators
8
electron beam
8
beam focusing
8
beam electrons
8
current rise
8
microwave sources
8
current
5

Similar Publications

Background And Purpose: In proton therapy, a relative biological effectiveness (RBE) of 1.1 is used to convert proton dose into an equivalent photon dose. However, RBE varies with tissue type, fraction dose, and beam quality parameters beyond dose such as linear energy transfer (LET) raising concerns about increased local effectiveness and potential toxicity.

View Article and Find Full Text PDF

Sparse loudspeaker array design for wideband frequency-invariant beamforming with multiple targets.

J Acoust Soc Am

January 2025

Key Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093, China.

Beamforming technology using loudspeaker arrays is widely used in sound applications, but current sparse array design methods focus on optimizing a single beam for a single target direction, limiting their applicability to multi-channel sound systems. This paper presents a design method for sparse loudspeaker line arrays to generate wideband frequency-invariant beams in multiple target directions. A model based on tapped delay lines is developed and a two-stage design approach is proposed.

View Article and Find Full Text PDF

Current availability of radiotherapy devices in Peru and artificial intelligence-based analysis for constructing a nationwide implementation plan.

Radiother Oncol

January 2025

Department of Radiotherapy, Instituto Nacional de Enfermedades Neoplasicas, Lima, Peru; Department of Radiation Oncology, Oncosalud - Auna, Lima, Peru. Electronic address:

Purpose: We provide for the first time a comprehensive situational diagnosis and propose an artificial intelligence (AI)-assisted nationwide plan of implementation, attending the most urgent needs.

Methods: Baseline information was collected from open-source databases of the Peruvian Government. Data on cancer incidence from the Health Authorities and GLOBOCAN were collected and compared.

View Article and Find Full Text PDF

Nanoscale semiconductors offer significant advantages over their bulk semiconductor equivalents for electronic devices as a result of the ability to geometrically tune electronic properties, the absence of internal grain boundaries, and the very low absolute number of defects that are present in such small volumes of material. However, these advantages can only be realized if reliable contacts can be made to the nanoscale semiconductor using a scalable, low-cost process. Although there are many low-cost "bottom-up" techniques for directly growing nanomaterials, the fabrication of contacts at the nanoscale usually requires expensive and slow techniques like e-beam lithography that are also hard to scale to a level of throughput that is required for commercialization.

View Article and Find Full Text PDF

Tracking and Navigation Technologies for Image-Guided Trans-Arterial Interventions.

Tech Vasc Interv Radiol

December 2024

Department of Radiology, Mayo Clinic, Phoenix, AZ. Electronic address:

Trans-arterial interventions are an increasingly utilized approach for diagnosing and treating a wide range of pathologies, providing superior patient outcomes compared to traditional open surgical methods. Recent advancements in tracking and navigation technologies have significantly refined these interventions, enhancing procedural precision and success. Advanced imaging modalities, such as fluoroscopy, cone beam computed tomography (CBCT), and intravascular ultrasound (IVUS), are frequently used strategies offering critical real-time guidance.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!