The adsorption of copper(II), zinc(II), nickel(II), lead(II), and cadmium(II) on Amberlite IR-120 synthetic sulfonated resin has been studied at different pH and temperatures by batch process. The effects of parameters such as amount of resin, resin contact time, pH, and temperature on the ion exchange separation have been investigated. For the determination of the adsorption behavior of the resin, the adsorption isotherms of metal ions have also been studied. The concentrations of metal ions have been measured by batch techniques and with AAS analysis. Adsorption analysis results obtained at various concentrations showed that the adsorption pattern on the resin followed Freundlich isotherms. Here we report the method that is applied for the sorption/separation of some toxic metals from their solutions.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.jcis.2004.08.147 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced sorbent properties by synergistic effect of biomass extract functional groups for effective uranium uptake from aqueous system.
Environ Res
December 2024
Department of Chemistry, Faculty of Science, University of Sarajevo, Zmaja od Bosne 33-35, 71000, Sarajevo, Bosnia and Herzegovina; International Society of Engineering Science and Technology, United Kingdom.
Adsorption for uranium removal from aqueous systems has been extensively studied, due to its many advantages. However, the great costs and complexity of many sorbent preparation methods are still restricting the progress. Hence, this research aimed to introduce a novel, simple and green method for enhancing Amberlite IR-120 properties for U(VI) removal.
View Article and Find Full Text PDFChiral separation of propranolol by electrokinetic chromatography using nanodiamonds and human serum albumin as a pseudo-stationary phase in river water.
Chirality
February 2024
Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, San Luis, Argentina.
Propranolol is currently considered as an emerging contaminant in water bodies. In this study, R- and S-propranolol were determined in river samples by electrokinetic chromatography (EKC) using nanodiamonds (NDs) and human serum albumin (HSA) as a pseudo-stationary phase in order to achieve enantioseparation. Previously, river samples were preconcentrated using a column filled with Amberlite® IR-120 and Dowex® 50WX8 resins.
View Article and Find Full Text PDFSustainable approach for catalytic green epoxidation of oleic acid with applied ion exchange resin.
Sci Rep
September 2023
Chemical Engineering Studies, College of Engineering, Universiti Teknologi MARA Cawangan Johor, Kampus Pasir Gudang, Masai, Malaysia.
Epoxides were primarily derived from petroleum-based sources. However, there has been limited research on optimizing the process parameters for epoxidized palm oil-derived oleic acid, resulting in its underutilization. Therefore, this study aimed to optimize the catalytic epoxidation of palm oleic acid concerning the oxirane content by applying ion exchange resin as a catalyst.
View Article and Find Full Text PDFSulfation of Birch Wood Microcrystalline Cellulose with Sulfamic Acid Using Ion-Exchange Resins as Catalysts.
Polymers (Basel)
February 2023
Institute of Chemistry and Chemical Technology, Krasnoyarsk Scientific Center, Siberian Branch, Russian Academy of Sciences, Akademgorodok 50, bld. 24, Krasnoyarsk 660036, Russia.
Cellulose sulfates are important biologically active substances with a wide range of useful properties. The development of new methods for the production of cellulose sulfates is an urgent task. In this work, we investigated ion-exchange resins as catalysts for the sulfation of cellulose with sulfamic acid.
View Article and Find Full Text PDFSelective removal of ammonia from wastewater using Cu(II)-loaded Amberlite IR-120 resin and its catalytic application for removal of dyes.
Environ Sci Pollut Res Int
October 2023
Chemistry Department, Faculty of Science, Tanta University, Tanta, 31527, Egypt.
Cationic ligand exchange is one of the most predominant mechanisms for the removal of ammonia from wastewater through complex formation. The complexation technique occurs between the metal ions loaded on the surface of Amberlite IR-120 and ammonia which is present in the medium. Cu(II)-loaded Amberlite IR-120 (R-Cu) was prepared and described using FT-IR, TGA, SEM, and EDX techniques.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!