As peripheral nerves bend and stretch, internal elements need to move in relation to each other. However, the way in which intraneural components interact is poorly understood. Previous work identified a distinct core and sheath in the rat sciatic nerve and provides a useful model with which to investigate this interaction. Here we have focused on identifying the mechanical and anatomical characteristics of the interface between core and sheath. Nerve samples, 15 and 20 mm long, of rat sciatic nerves were harvested and placed in a purpose-built jig, and a tensile testing machine was used to pull core from sheath. Mechanical tests of specimens in which core had been previously pulled from sheath by 25% of its initial length achieved a mean pull-out force approximately six times smaller than that achieved using intact controls. These results are consistent with the proposal that core-sheath interactions involve physical connections rather than a viscous fluid interface. Anatomical features of this interface were characterised using transmission electron microscopy. It appeared that sheath was derived from epineurium and most of the perineurium, whilst core consisted of endoneurium and a small proportion of the perineurium: the plane of cleavage appeared to involve the innermost perineurial cell layer.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1111/j.1085-9489.2004.09411.x | DOI Listing |
Polymers (Basel)
January 2025
Department of Mechanical Engineering, Faculty of Engineering, University of Porto, 4200-465 Porto, Portugal.
Smart textiles provide a significant technological advancement, but their development must balance traditional textile properties with electronic features. To address this challenge, this study introduces a flexible, electrically conductive composite material that can be fabricated using a continuous bi-component extrusion process, making it ideal for sensor electrodes. The primary aim was to create a composite for the filament's core, combining multi-walled carbon nanotubes (MWCNTs), polypropylene (PP), and thermoplastic elastomer (TPE), optimised for conductivity and flexibility.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Hubei Key Laboratory of Power Equipment & System Security for Integrated Energy, School of Electrical Engineering and Automation, Wuhan University, Wuhan 430072, China.
High-voltage (HV) cables are increasingly used in urban power grids, and their safe operation is critical to grid stability. Previous studies have analyzed various defects, including the open circuit in the sheath loop, the flooding in the cross-bonded link box, and the sheath grounding fault. However, there is a paucity of research on the defect of the reverse direction between the inner core and the outer shield of the coaxial cable.
View Article and Find Full Text PDFCommun Biol
January 2025
Department of Obstetrics and Gynecology, Nagoya University Graduate School of Medicine, Nagoya, Japan.
Histological chorioamnionitis (HCA) is a form of maternal immune activation (MIA) linked to an increased risk of neurodevelopmental disorders in offspring. Our previous study identified neurodevelopmental impairments in an MIA mouse model mimicking HCA. Thus, this study investigated the role of CD11c microglia, key contributors to myelination through IGF-1 production, in this pathology.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Sensor and Actuator Systems, Department of Physics, Chemistry and Biology (IFM), Linköping University, Linköping SE-581 83, Sweden.
Electropolymerized polypyrrole (PPy) is considered as one of the promising polymers for use in ionic-electroactive or conducting polymer (CP) actuators. Its electromechanical properties surpass those of other prominent CPs such as poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT/PSS) or polyaniline. However, freestanding and linear contracting actuator fibers made solely of electropolymerized PPy are not available yet.
View Article and Find Full Text PDFMaterials (Basel)
December 2024
Department of Sustainable Bioproducts, Mississippi State University, P.O. Box 9820, Starkville, MS 39762, USA.
This study explores the potential of using underutilized materials from agricultural and forestry systems, such as rice husk, wheat straw, and wood strands, in developing corrugated core sandwich panels as a structural building material. By leveraging the unique properties of these biobased materials within a corrugated geometry, the research presents a novel approach to enhancing the structural performance of such underutilized biobased materials. These biobased materials were used in different lengths to consider the manufacturing feasibility of corrugated panels and the effect of fiber length on their structural performance.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!