Densonucleosis virus purification by ion exchange membranes.

Biotechnol Bioeng

Department of Chemical Engineering, Colorado State University, Fort Collins, Colorado 80523-1370, USA.

Published: November 2004

Preparative chromatography is widely used in the downstream purification of biopharmaceutical products. Replacement of resins by membranes as chromatographic supports, overcomes many of the limitations associated with resin-based chromatography such as high-pressure drops, slow processing rates due to pore diffusion and channeling of the feed through the bed. In particular, adsorptive membranes may be ideally suited for virus capture. Virus capture is critical in a number of applications. In gene therapy and vaccine production, large-scale purification of virus vectors is often essential. In the manufacture of biopharmaceuticals, validation of virus clearance is critical. Here results for purification of Aedes aegypti densonucleosis virus (AeDNV) using anion and cation exchange membranes are presented. AeDNV is a non-enveloped, single-stranded mosquito-specific parvovirus. Virus particles are around 20 nm in size. AeDNV could find potential applications in integrated vector-borne disease control programs. In addition, capture of parvovirus for validation of virus clearance in the manufacture of biopharmaceuticals is of commercial importance. By adjusting the pH of the feed stream, AeDNV particles may be adsorbed by both anion and cation exchange membranes. However, strongly basic anion exchange membranes were the most effective in adsorbing AeDNV particles. Adsorption and subsequent elution of AeDNV by anion exchange membranes leads to significant virus concentration. Dynamic and static capacities for anion exchange membranes were similar. Further, a sharp elution curve was obtained suggesting that pore diffusional resistances are insignificant. The adsorption of AeDNV particles by anion exchange membranes may be described by a linear isotherm.

Download full-text PDF

Source
http://dx.doi.org/10.1002/bit.20270DOI Listing

Publication Analysis

Top Keywords

exchange membranes
28
anion exchange
16
aednv particles
12
membranes
9
densonucleosis virus
8
virus
8
virus capture
8
manufacture biopharmaceuticals
8
validation virus
8
virus clearance
8

Similar Publications

This study presents the preparation and electrochemical testing of sulfonated styrene-grafted poly(vinylidene fluoride) (pVDF) copolymers as proton exchange membranes (PEMs) for semi-organic redox flow batteries (RFBs) based on 9,10-anthraquinone-2,7-disulfonic acid (AQDS)/bromine. The copolymers are synthesized via a two-step procedure, involving i) atom transfer radical polymerization of styrene (Sty) for the grafting to the pVDF backbone and ii) the sulfonation of the polystyrene grafted side chains. Copolymers with different amounts of sulfonated styrene (SSty) in the side chains (i.

View Article and Find Full Text PDF

Anion Exchange Membranes (AEMs) are promising materials for electrochemical devices, such as fuel cells and electrolyzers. However, the main drawback of AEMs is their low durability in alkaline operating conditions. A possible solution is the use of composite ionomers containing inorganic fillers stable in a basic environment.

View Article and Find Full Text PDF

The urgent need for sustainable, low-emission energy solutions has positioned proton exchange membrane fuel cells (PEMFCs) as a promising technology in clean energy conversion. Polysulfone (PSF) membranes with incorporated ionic liquid (IL) and hydrophobic polydimethylsiloxane-functionalized silica (SiO-PDMS) were developed and characterized for their potential application in PEMFCs. Using a phase inversion method, membranes with various combinations of PSFs, SiO-PDMS, and 1-butyl-3-methylimidazolium triflate (BMI.

View Article and Find Full Text PDF

Enhanced Performance and Durability of Pore-Filling Membranes for Anion Exchange Membrane Water Electrolysis.

Membranes (Basel)

December 2024

Department of Green Chemical Engineering, College of Engineering, Sangmyung University, Cheonan 31066, Republic of Korea.

Four distinct pore-filling anion exchange membranes (PFAEMs) were prepared, and their mechanical properties, ion conductivity, and performance in anion exchange membrane water electrolysis (AEMWE) were evaluated. The fabricated PFAEMs demonstrated exceptional tensile strength, which was approximately 14 times higher than that of the commercial membrane, despite being nearly half as thin. Ion conductivity measurements revealed that acrylamide-based membranes outperformed benzyl-based ones, exhibiting 25% and 41% higher conductivity when using crosslinkers with two and three crosslinking sites, respectively.

View Article and Find Full Text PDF

Electrodialysis (ED) has already been applied to recover nickel in galvanizing processes, allowing nickel recovery and the production of a treated effluent with demineralized water quality. However, the growth in ED use is still limited by the production and commercialization of ion-selective membranes, currently limited to a few large companies. Therefore, this paper presents the development of homogeneous cationic and anionic membranes made from poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) for ED use.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!