Adsorption of alpha-chymotrypsin onto mica in laminar flow conditions. Adsorption kinetic constant as a function of tris buffer concentration at pH 8.6.

Langmuir

European Membrane Institute, UMR 5635 (CNRS, ENSCM, UMII), Université Montpellier II, CC047, 2 Place Eugène Bataillon, F-34095 Montpellier Cedex 5, France.

Published: September 2004

We examined the adsorption kinetics of alpha-chymotrypsin (pH 8.6, 10(-2) to 0.5 M Tris buffer) on muscovite mica in conditions of laminar flow through a slit. The range of buffer concentrations is between two limits: (i) no adsorption in 1 M Tris and (ii) no desorption in 10(-3) M Tris. Studying the dependence of adsorption kinetics on the wall shear rate leads to the determination of the interfacial adsorption kinetic constant ka and the diffusion coefficient. The obtained value for the diffusion coefficient is close to the one expected from the molecular size of alpha-chymotrypsin. The interfacial adsorption kinetic constant of alpha-chymotrypsin decreases when ionic strength increases, while the initial desorption constant (over a part of all the adsorbed population) shows the contrary. Although alpha-chymotrypsin is almost at its isoelectric point, the effect of ionic strength on the adsorption kinetics suggests the importance of electrostatic interactions between the protein and mica. We observed an increase in the adsorption rate, at a surface coverage near 0.14 microg cm(-2), for adsorption in 10(-2) M Tris and the low wall shear rates (<300 s(-1)). This change in the adsorption rate suggests a structural transition, that we assume again to be due to electrostatic interactions, but between proteins. The large dipole moment of the protein may induce this transition, illustrated here by the ferroelectric/antiferroelectric pattern. The variation of the zeta potential with interfacial concentration seems to be in agreement with such a model.

Download full-text PDF

Source
http://dx.doi.org/10.1021/la0490588DOI Listing

Publication Analysis

Top Keywords

adsorption kinetic
12
kinetic constant
12
adsorption kinetics
12
adsorption
10
laminar flow
8
tris buffer
8
10-2 tris
8
wall shear
8
interfacial adsorption
8
diffusion coefficient
8

Similar Publications

Nanocellulose/activated carbon composite aerogel beads with high adsorption capacity for toxins in blood.

Int J Biol Macromol

January 2025

School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China; School of Materials Science and Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China. Electronic address:

Activated carbon is extensively utilized in blood purification applications. However, its performance has been significantly limited by their poor blood compatibility. In this work, 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCN) and activated carbon (AC) were used to form composite beads by the drop curing method to improve hemocompatibility.

View Article and Find Full Text PDF

Cellulose/covalent organic framework aerogel for efficient removal of Cr(VI): Performance and mechanism study.

Int J Biol Macromol

January 2025

Yunnan Provincial Key Laboratory of Wood Adhesives and Glued Products, Southwest Forestry University, Kunming 650224, Yunnan, China. Electronic address:

Cellulose composites have exceptional qualities, particularly in removing heavy metal ions. Nevertheless, these materials' poor mechanical qualities and the restricted exposure of surface-active sites reduce the effectiveness of their removal. The removal efficiency of adsorbent materials largely depends on their macroscopic structural characteristics.

View Article and Find Full Text PDF

For the effective removal of phenol from the environment, photocatalytic synergistic adsorption is currently one of the key methods. By leveraging the polysaccharide backbone structure of sodium alginate (SA),Zinc hydroxystannate (ZHS) was introduced into the gel structure using a co-precipitation technique. Additionally, gangue waste was repurposed through a polymerization reaction.

View Article and Find Full Text PDF

This study thoroughly investigated the adsorption of Congo Red (CR) dye onto various microplastics (MPs), including high-density polyethylene (HDPE), polyvinyl chloride (PVC), low-density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET). Initial adsorption capacities (q) revealed that HDPE had the highest value (21.90 mg/g), followed by PVC (4.

View Article and Find Full Text PDF

Context: Natural fluorapatite (FAP) has been investigated as an adsorbent for the removal of dyes such as methylene blue (MB) and crystal violet (CV) from aqueous solutions. Effective dye removal is crucial for water treatment, particularly for industrial wastewater containing toxic dyes. FAP, a naturally abundant material, was characterized using XRD, FTIR, and SEM analysis.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!