The purpose of this study was to compare the effect of a self-etching primer and a non-rinse conditioner with the effect of a conventional adhesive system on the penetration depth in dentin of human teeth, using scanning electronic microscopy (SEM). Fifteen human third molar teeth were sectioned into 2 pieces. All pieces were flattened with grade 600 to 1200 silicon carbide paper and divided into 6 groups: group 1 - Prime & Bond NT (NT), negative control; group 2 - 37% phosphoric acid + Prime & Bond NT (PANT), positive control; group 3 - Non-rinse Conditioner (NRC) + Prime & Bond NT (NRCNT); group 4 - NRC + Prime & Bond 2.1 (NRCPB); group 5 - NRC + Scotchbond MP (NRCSB); group 6 - Prompt L-Pop (PLP). All teeth were covered with Dyract AP. The tooth fragments were decalcified, and its resin replicas were evaluated by SEM by three previously standardized examiners. The penetration was scored from 0 (no penetration) to 3 (maximum penetration). The Kruskal-Wallis and Mann-Whitney U tests (p<0.05) showed three statistically homogeneous groups: (NT, NRCPB, NRCSB and PLP), (NRCNT) and [PANT]. The authors concluded that the self-etching primer and the non-rinse conditioner provide a lower penetration depth in human tooth dentin than the conventional adhesive system.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1590/s0103-64402004000100004 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Short dentin etching with universal adhesives: effect on bond strength and gingival margin adaptation.
BMC Oral Health
January 2025
Conservative Department, Faculty of Dentistry, Kafr Al Sheikh University, Kafr Al Sheikh, Egypt.
Background: Short dentin etching, a relatively recent technique, aims to improve resin-dentin bonding by preserving hydroxyapatite crystals within the collagen spaces. This study explores short dentin etching's potential in mitigating over-etching issues in deep proximal dentin/cementum margins, an aspect not previously investigated. This study evaluates the microtensile bond strength (μTBS) and marginal adaptation of two universal adhesives using different etch-and-rinse strategies (15-second and 3-second etching) and self-etch strategies, both immediate and post-thermal cycling and mechanical loading.
View Article and Find Full Text PDFRepair bond strength of composite resin to CAD/CAM glass-ceramic: influence of cleaning methods, surface treatments, and aging.
J Dent
January 2025
DDS, MS, PhD, Department of Dentistry, Federal University of Rio Grande do Norte, Natal, Brazil. Electronic address:
Objective: To evaluate the influence of different cleaning methods, surface treatments, and aging on the repair bond strength to a CAD/CAM glass-ceramic.
Materials And Methods: Forty-eight lithium disilicate CAD/CAM ceramic blocks were fabricated, sintered, and embedded in acrylic resin. After contamination with human saliva, they were divided according to the factors "Cleaning method" (Control-water/air spray, Air-particle abrasion with AlO, Ivoclean cleaning paste), "Surface treatment" (5% Hydrofluoric acid-HF + Silane, Monobond Etch & Prime-MEP), and "Aging" (thermocycling, no thermocycling).
Effectiveness of surgical versus non-surgical interventions in treatment of digital mucous cysts.
Arch Dermatol Res
January 2025
Department of Dermatology, Oregon Health & Science University, 3303 S Bond Ave Building 1, 16th floor, Portland, OR, 97239, USA.
Probing Magnetism in Self-Assembled Organometallic Complexes Using Kondo Spectroscopy.
ACS Nano
January 2025
Physikalisches Institut, Karlsruhe Institute of Technology, Karlsruhe 76131, Germany.
Article Synopsis
- Control of individual atomic spins is essential for advancements in spintronics, quantum sensing, and quantum information processing, with scanning tunneling microscopy (STM) being a effective tool for manipulation.
- The research presents a new method for self-assembling magnetic organometallic complexes using iron atoms and specific molecules (Cu(dbm) and FePc) on a silver substrate, effectively forming complexes that mimic metallocenes.
- Magnetic properties of these complexes show a notable Kondo effect, which is explained through density functional theory calculations indicating that the interaction between Fe 3d-orbitals and benzene π-orbitals enhances Kondo screening, offering insights for designing hybrid organometallic systems.
Bonding efficacy of highly translucent zirconia and lithium disilicate glass ceramics after femtosecond laser irradiation.
J Prosthodont Res
January 2025
Department of Gerodontology and Oral Rehabilitation, Graduate School of Medical and Dental Sciences, Tokyo Medical and Dental University, Tokyo, Japan.
Purpose: This study investigated the effects of femtosecond laser (FL) irradiation on the surface roughness and shear bond strength of high-translucency zirconia (6 mol% yttria-partially stabilized zirconia [6Y-PSZ]) and lithium disilicate (LiSiO) glass ceramics.
Methods: Fully sintered square-shaped specimens of 6Y-PSZ (7 groups; 20 specimens/group) and LiSiO (8 groups; 20 specimens/group) were surface-treated via sandblasting (50-μm alumina sand or glass beads) or FL irradiation (20- or 40-μm dot or cross-line patterns) or using Monobond Etch & Prime (Ivoclar Vivadent AG; only for LiSiO specimens). The surface roughness (arithmetic average [Sa] and developed interfacial area ratio [Sdr]) and shear bond strength after 24 h and 10,000 thermal cycles were measured and statistically analyzed.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!