Xanthan gum production from cassava bagasse hydrolysate with Xanthomonas campestris using alternative sources of nitrogen.

Appl Biochem Biotechnol

Biotechnological Processes Laboratory, Chemical Engineering Department, Federal University of Parana, PO Box 19 011, CEP 81531-990 Curitiba-PR, Brazil.

Published: March 2005

Cassava bagasse was hydrolyzed using HCl and the hydrolysate was used for the production of xanthan gum using a bacterial culture of Xanthomonas campestris. Cassava bagasse hydrolysate with an initial concentration of approx 20 g of glucose/L proved to be the best substrate concentration for xanthan gum production. Among the organic and inorganic nitrogen sources tested to supplement the medium-urea, yeast extract, peptone, potassium nitrate, and ammonium sulfate-potassium nitrate was most suitable. Ammonium sulfate was the least effective for xanthan gum production, and it affected sugar utilization by the bacterial culture. In media with an initial sugar concentration of 48.6 and 40.4 g/L, at the end of fermentation about 30 g/L of sugars was unused. Maximum xanthan gum (about 14 g/L) was produced when fermentation was carried out with a medium containing 19.8 g/L of initial reducing sugars supplemented with potassium nitrate and fermented for 72 h, and it remained almost the same until the end of fermentation (i.e., 96 h).

Download full-text PDF

Source
http://dx.doi.org/10.1385/abab:118:1-3:305DOI Listing

Publication Analysis

Top Keywords

xanthan gum
20
gum production
12
cassava bagasse
12
bagasse hydrolysate
8
xanthomonas campestris
8
bacterial culture
8
potassium nitrate
8
xanthan
5
production
4
production cassava
4

Similar Publications

Geothermal energy, oil industry, and underground gas storage technology require deep drilling. Although oil-based drilling fluids have been widely used, they cause environmental issues. Environmentally friendly Aphronic fluid has emerged as an alternative to oil-based drilling fluid.

View Article and Find Full Text PDF

De novo evolution of antibiotic resistance to Oct-TriA.

Microbiol Res

January 2025

Department of Biology, Concordia University, Montréal, Québec H4B 1R6, Canada; Department of Chemistry and Biochemistry, Concordia University, Montréal, Québec H4B 1R6, Canada. Electronic address:

The rise of antimicrobial resistance as a global health concern has led to a strong interest in compounds able to inhibit the growth of bacteria without detectable levels of resistance evolution. A number of these compounds have been reported in recent years, including the tridecaptins, a small family of lipopeptides typified by the synthetic analogue octyl-tridecaptin A. Hypothesizing that prior reports of negligible resistance evolution have been due in part to limitations in the laboratory evolution systems used, we have attempted to select for resistant mutants using a soft agar gradient evolution (SAGE) system developed by our lab.

View Article and Find Full Text PDF

Noodles are usually rich in carbohydrates but lack essential nutrients such as protein, fiber, vitamins, and minerals, potentially causing metabolic problems if consumed in the long term. This review explores strategies to improve the quality of noodles through substitution and fortification. Substitution is replacing the main ingredient with a more nutrient-dense alternative, such as sweet potato starch, which has been shown to improve the nutritional content of noodles, such as fiber and beta carotene.

View Article and Find Full Text PDF

Thermochromic wood-based phase change material (TWPCM) is a temperature-responsive, smart material that actively manages thermal energy in response to ambient temperature fluctuations. The material has become a central focus in research on thermal energy storage and temperature sensing in recent years. A key research direction is the incorporation of delignified veneer impregnated with thermochromic phase change material (TPCM) into a multi-layered structure to enhance the thermal energy storage capacity of TWPCM.

View Article and Find Full Text PDF

Blended ƙ-carrageenan and xanthan gum hydrogel containing ketoprofen-loaded nanoemulsions: Design, characterization, and evaluation in an animal model of rheumatoid arthritis.

Drug Deliv Transl Res

January 2025

Departamento de Farmácia Industrial, Laboratório de Tecnologia Farmacêutica, Programa de Pós-Graduação Em Ciências Farmacêuticas, Centro de Ciências da Saúde, Universidade Federal de Santa Maria, Santa Maria, RS, CEP 97105-900, Brazil.

This study reports the preparation of hydrogels (HG) made with xanthan gum (XG) and ƙ-carrageenan (KC) polysaccharides containing ketoprofen (KET)-loaded nanoemulsions (NK) and their evaluation in a rheumatoid arthritis (RA) model. The nano-based HGs exhibited nanometric-sized droplets (~ 100 nm), an acidic pH (5.10-6.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!