Structural changes at annealing temperatures (T(an)) of 500-1,100 degrees C were investigated for thin Ta films which were sputter-deposited onto pure Si substrates and onto thermally oxidized Si. In the as-deposited state, the Ta layers predominantly consist of metastable tetragonal beta-Ta, whereby the [001] texture is independent of the substrate material. At lower annealing temperatures, the microstructural evolution is essentially the same for both Ta films. Incorporation of O atoms causes an increase of the intrinsic compressive stress, and diffusion of C atoms into the Ta layer leads to the formation of Ta(2)C. Additionally, a partial transformation of the original beta-Ta phase into a second phase with tetragonal unit cell (denoted as beta'-Ta) occurs. For the Ta/Si system, the formation of a Ta-Si intermixing layer is initiated at T(an)=550 degrees C, and nucleation of crystalline TaSi(2) occurs at T(an)=620 degrees C. The formation of a second Ta silicide was not detected up to T(an)=900 degrees C. In the case of the Ta film deposited onto the SiO(2) substrate, the metastable beta-Ta and the beta'-Ta transform completely into the thermodynamically stable cubic alpha-Ta at T(an)=750 degrees C. A marked reaction with the substrate indicated by the formation of Ta(2)O(5) and Ta(5)Si(3) occurs at T(an)=1,000 degrees C.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s00216-004-2602-5DOI Listing

Publication Analysis

Top Keywords

thin films
8
deposited sio2
8
annealing temperatures
8
degrees
6
comparison annealing
4
annealing behavior
4
behavior thin
4
films deposited
4
sio2 substrates
4
substrates structural
4

Similar Publications

Ultralow k covalent organic frameworks enabling high fidelity signal transmission and high temperature electromechanical sensing.

Nat Commun

December 2024

Key Laboratory of Advanced Polymeric Materials of Shanghai, School of Materials Science and Engineering, East China University of Science and Technology, Shanghai, P. R. China.

As integrated circuits have developed towards the direction of complexity and miniaturization, there is an urgent need for low dielectric constant materials to effectively realize high-fidelity signal transmission. However, there remains a challenge to achieve ultralow dielectric constant and ultralow dielectric loss over a wide temperature range, not to mention having excellent thermal conductivity and processability concurrently. We herein prepare dual-linker freestanding covalent organic framework films with tailorable fluorine content via interfacial polymerization.

View Article and Find Full Text PDF

High-performance 2D electronic devices enabled by strong and tough two-dimensional polymer with ultra-low dielectric constant.

Nat Commun

December 2024

Department of Materials Science and NanoEngineering and the Rice Advanced Materials Institute, Rice University, Houston, TX, 77005, USA.

As the feature size of microelectronic circuits is scaling down to nanometer order, the increasing interconnect crosstalk, resistance-capacitance (RC) delay and power consumption can limit the chip performance and reliability. To address these challenges, new low-k dielectric (k < 2) materials need to be developed to replace current silicon dioxide (k = 3.9) or SiCOH, etc.

View Article and Find Full Text PDF

This study introduces a novel method for achieving highly ordered-crystalline InGaO [0 ≤ x ≤ 0.6] thin films on Si substrates at 250 °C using plasma-enhanced atomic-layer-deposition (PEALD) with dual seed crystal layers (SCLs) of γ-AlO and ZnO. Field-effect transistors (FETs) with random polycrystalline InGaO channels (grown without SCLs) show a mobility (µFE) of 85.

View Article and Find Full Text PDF

Unlocking Micro-Origami Energy Storage.

ACS Appl Energy Mater

December 2024

Research Center for Materials, Architectures and Integration of Nanomembranes (MAIN), Chemnitz University of Technology, 09107 Chemnitz, Germany.

Transforming thin films into high-order stacks has proven effective for robust energy storage in macroscopic configurations like cylindrical, prismatic, and pouch cells. However, the lack of tools at the submillimeter scales has hindered the creation of similar high-order stacks for micro- and nanoscale energy storage devices, a critical step toward autonomous intelligent microsystems. This Spotlight on Applications article presents recent advancements in micro-origami technology, focusing on shaping nano/micrometer-thick films into three-dimensional architectures to achieve folded or rolled structures for microscale energy storage devices.

View Article and Find Full Text PDF

Rationalizing the role of chemical interactions in the precursor solutions on the structure, morphology, and performance of thin-film CuZnSn(S,Se) (CZTSSe) is key for the development of bifacial and other photovoltaic (PV) device architectures designed by scalable solution-based methods. In this study, we uncover the impact of dimethylformamide (DMF) and isopropanol (IPA) solvent mixtures on cation complexation and rheology of the precursor solution, as well as the corresponding morphology, composition, and PV performance of CZTSSe thin-film grown on fluorine-doped tin oxide (FTO). We find that increasing the proportion of IPA leads to a nonlinear increase in dynamic viscosity due to the strong repulsion between DMF and IPA, which is characterized by an interaction cohesion parameter of 3.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!