The authors have proposed a new type of ultrasonic microscopy for biological tissue characterization. The system is driven by a nanosecond pulse voltage, the generated acoustic wave being reflected at the front and rear side of the sliced tissue. In this report, a time-frequency analysis was applied to determine the sound speed thorough the tissue. Frequency dependence of sound speed was obtained with a myocardium of a rat sliced into 10 microm. As the reflected waveform had a significant amount of oscillating component, the waveform was once subjected to the deconvolution process. As the result, two reflections were clearly separated in time domain. Then these two reflections were separately analyzed by time-frequency analysis. Each reflection was extracted by using a proper window function. Phase angles of these reflections at the same frequency were compared. A sound speed micrograph at an arbitrary frequency in between 50 and 150 MHz was successfully obtained. A tendency was found that the sound speed slightly increases with frequency.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.ultras.2003.11.005 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Three-dimensional diffractive acoustic tomography.
Nat Commun
January 2025
Department of Biomedical Engineering, Duke University, Durham, NC, USA.
Acoustically probing biological tissues with light or sound, photoacoustic and ultrasound imaging can provide anatomical, functional, and/or molecular information at depths far beyond the optical diffusion limit. However, most photoacoustic and ultrasound imaging systems rely on linear-array transducers with elevational focusing and are limited to two-dimensional imaging with anisotropic resolutions. Here, we present three-dimensional diffractive acoustic tomography (3D-DAT), which uses an off-the-shelf linear-array transducer with single-slit acoustic diffraction.
View Article and Find Full Text PDFAssessing the potential acoustic impact of floating offshore wind farms in the Central Mediterranean Sea.
Mar Pollut Bull
January 2025
Institute for the study of anthropogenic impacts and sustainability in the marine environment, National Research Council of Italy, Via del Mare 3, 91021 Torretta Granitola, Italy.
The Strait of Sicily, a vital marine passage with diverse fauna, is seeing a steep rise in the planning of offshore wind farm projects. This study assesses the acoustic impact of these wind farms on local marine species. Underwater propagation was modeled for three proposed floating wind farms using JASCO's Marine Operations Noise Model (MONM), which integrates a parabolic equation method for frequencies from 10 to 800 Hz and a beam-tracing model for 1 to 25 kHz.
View Article and Find Full Text PDFEffects of Hydration and a Hyaluronic Acid-Containing Lozenge on Voice Parameters in Conjunction With a Vocal Loading Test.
J Speech Lang Hear Res
January 2025
Division of Phoniatrics and Pediatric Audiology, Department of Otolaryngology, Munich University Hospital and Faculty of Medicine, Munich University (Ludwig-Maximilians-Universität), Germany.
Purpose: This study explores the effects of water intake and a hyaluronic acid (HA)-containing lozenge on acoustic measurements and vocal oscillation patterns investigated after a vocal loading test (VLT).
Method: Ten healthy subjects (five females, five males) read out loud a standardized text for 10 min at a target level of 80 dB(A), measured 30 cm from the mouth, under three conditions but each after fasting for 2 hr: (a) drinking 0.7 l of water, (b) sucking an HA-containing lozenge, and (c) neither of both before the VLT.
Listening to the Formation of Polymorphs in a Ball Mill.
Anal Chem
January 2025
ICGM, Univ. Montpellier, CNRS, ENSCM, 34000 Montpellier, France.
In this contribution, we apply our newly developed ball-milling platform, which combines Raman spectroscopy and thermal (IR) imaging, as well as acoustic and high-speed optical video recordings, to the synthesis and transformation of citric acid-isonicotinamide (1:2) cocrystal polymorphs in transparent PMMA jars. Particularly, we demonstrate how Raman, temperature, acoustic, and video data are complementary and enable detection and connection of chemical and physical events happening during ball-milling in a time-resolved manner. Importantly, we show that the formation of the three cocrystal polymorphs can be detected through acoustic analyses solely.
View Article and Find Full Text PDFEffect of Hardness Distribution on Strength of Narrow-Gap Hot-Wire Laser-Welded Joint for High-Tensile Strength Steel.
Materials (Basel)
January 2025
Graduate School of Advanced Science and Engineering, Hiroshima University, Hiroshima 739-8527, Japan.
Application of high-heat input welding on high-tensile strength steels causes deterioration of mechanical properties of the welded joint, due to softening and grain coarsening in the heat-affected zone (HAZ). In this study, low-heat input narrow-gap hot-wire laser welding was applied to 12 mm thick 780 MPa-class high-tensile strength steel plate. Conditions were optimized based on microstructural observations of joints produced at various welding speeds.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!