Six crystal glass compositions without added lead were used to prepare standard beakers having a volume of ca. 240 ml. The experimentally determined concentrations of the elements in the glass beakers were in satisfactory agreement with the theoretically predicted values. The degree of leaching of selected elements from these beakers was determined using 4% acetic acid as described in the ISO 7086-1:2000 standard test. In addition, to the degree of leaching by 4% acetic acid, migration into cola, red wine, 40% ethanol and 0.3% citric acid was also determined. Elements tested included antimony, barium, bismuth and zinc as these were considered to be of most interest. The results show that it is possible to produce durable glass containing no added lead. The overall quality of the glasses was good and the concentrations of the various elements migrating (leaching) into the various test solutions used was very small and it is clear that they would not present a hazard to consumers in the event that they were to use glasses of any of these compositions for consumption of either alcoholic or non-alcoholic beverages. The original ISO7086-1:2000 test using a 4% acetic acid leaching solution was developed to test for lead migration from crystal containing added lead and ceramic ware containing lead glazes or colouring. This work also shows that it is an excellent leaching agent for assessing the safety of crystal containing no added lead as it gave the highest degree of migration for all the glass compositions and all the elements tested. In the case of glasses containing ZnO, it was shown that the degree of zinc migration was linearly related to the mole-% of ZnO in the glass. With respect to the durability of glasses, it was shown that the degree of attack increases when the degree of silica depolymerisation increases.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/S0048-9697(03)00409-1 | DOI Listing |
Food Res Int
February 2025
Dairy Technology Division, ICAR-National Dairy Research Institute, Karnal, Haryana, India.
The research aimed to assess the effect of polysaccharides (maltodextrin and β-cyclodextrin) on technological properties of low-lactose milk powder obtained by spray drying of β-galactosidase hydrolysed milk. Low-lactose milk powders i.e.
View Article and Find Full Text PDFSci Rep
January 2025
Research Center of Traffic Disaster Prevention and Mitigation, Jilin Jianzhu University, Jilin Jianzhu University, Xincheng Street, Changchun, 130118, Jilin, China.
To promote the recycling of waste glass and satisfy the demands of environmental sustainability for ultrahigh performance concrete (UHPC), in this study, glass sand was employed to partially or entirely replace machine-made sand, and steel fibres were incorporated to fabricate ultrahigh performance shotcrete (UHPS). The effects of glass sand and steel fibres on the mechanical and electrical properties of composite materials were analysed in this study. Furthermore, alkali‒silica reaction (ASR) tests and microstructural analyses were conducted.
View Article and Find Full Text PDFGraphene 2D Mater
June 2024
NanoSafe, Inc., Blacksburg, VA 24060, USA.
Five commercially available cut-resistant gloves were sourced from four different worldwide manufacturers which were advertised to contain graphene. A method was developed to assess the fibers composing each glove, including dissolution of the constituent fibers using sulfuric acid or liquid paraffin at elevated temperature, to extract and analyze particle additives. Scanning electron microscopy with energy-dispersive X-ray spectroscopy was applied to fibers and extracted particles for morphological and elemental analysis; Raman spectroscopy was applied to discern the composition of carbonaceous materials for the ultimate purpose of identifying any graphenic additives.
View Article and Find Full Text PDFBiomater Res
January 2025
Department of Burn and Plastic Surgery, The First Affiliated Hospital of Soochow University, Soochow University, Suzhou 215006, China.
As a complex and dynamically regulated process, wound healing is collaboratively carried out by multiple types of cells. However, the precise mechanisms by which these cells contribute to immune regulation are not yet fully understood. Although research on bone regeneration has been quite extensive, the application of bioactive glass (BG) in skin tissue repair remains still relatively underexplored.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Department of Chemical and Biological Engineering, Sookmyung Women's University, Seoul 04310, Korea.
Advancements in printing techniques are essential for fabricating next-generation displays. Lead halide perovskites demonstrate great potential as light emitters of solution-processed light-emitting diodes (LEDs). In particular, the perovskite/polymer composite emitters exhibit exceptional luminescent characteristics, mechanical flexibility, and environmental stability due to the improved film morphologies and defect passivation achieved through the introduction of polymer additives.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!