A new and simple method for the determination of hydroxylamine in environmental water, such as fresh rivers and lakes using hypochlorite, followed by its gas choromatographic detection, has been developed. A glass vial filled with sample water was sealed by a butyl-rubber stopper and aluminum cap without head-space, and then sodium hypochlorite solution was injected into the vial through a syringe to convert hydroxylamine to nitrous oxide. The head-space in the glass vial was prepared with 99.9% grade N2 using a gas-tight syringe. After the glass vial was shaken for a few minutes, nitrous oxide in the gas-phase was measured by a gas chromatograph with an electron-capture detector. The dissolved nitrous oxide in the liquid-phase was calculated according to the solubility formula. The proposed method was applied to the analysis of fresh-water samples taken from Iu river and Hii river, flowing into brackish Lakes Nakaumi and Shinji, respectively.

Download full-text PDF

Source
http://dx.doi.org/10.2116/analsci.20.139DOI Listing

Publication Analysis

Top Keywords

glass vial
12
nitrous oxide
12
method determination
8
determination hydroxylamine
8
fresh-water samples
8
hypochlorite gas
8
simple sensitive
4
sensitive method
4
hydroxylamine fresh-water
4
samples hypochlorite
4

Similar Publications

Numerical modeling of conventional spin-stop agitation of liquid drug products for automated visual inspection.

Int J Pharm

January 2025

Amgen Inc., Process Development, Manufacturing Technology Advancement (MTA) Group, Thousand Oaks, CA 91320, USA. Electronic address:

Article Synopsis
  • The automated visual inspection (AVI) of liquid-filled vials and syringes in pharmaceutical production uses a spin-stop motion to detach particles for better detection.
  • A validated numerical model for a specific glass vial was created to study how different agitation motions and liquid properties affect particle mobilization.
  • Findings indicate that higher angular acceleration during agitation improves the wall shear stress distribution, enhancing particle detection, and the developed model can be adapted for various container types and liquids to optimize AVI processes.
View Article and Find Full Text PDF

To evaluate and project the shelf life of GLPG4399, an early-phase clinical drug formulation by applying the Accelerated Stability Assessment Program (ASAP) approach. Forced degradation conditions were implemented to identify the stability-limiting degradation product. The drug and its degradation products were separated using a validated liquid chromatography method.

View Article and Find Full Text PDF

An increasing number of pharmaceutical products require deep cold storage at cryogenic conditions, approximately -150°C to -190°C, to maintain stability and/or activity. Previous work has revealed that, at these extreme conditions, a typical pharmaceutical package configuration (vial, stopper, crimp cap) may lose container closure integrity (CCI) due to both the glass transition temperature (-55°C to -70°C) of the rubber stopper used to seal the vial and the different thermal expansion coefficients of the primary packaging components. Importantly, this type of temporary breach in CCI frequently reseals itself when the vial is brought back to ambient temperature.

View Article and Find Full Text PDF

Development of compact electrolytic enrichment system for environmental tritium analysis.

Radiat Prot Dosimetry

November 2024

Department of Nuclear and Radiochemical Science, Kyushu Environmental Evaluation Association, 1-10-1 Matsukadai, Higashiku Fukuoka 813-0004, Japan.

The new electrolytic enrichment system with compact glass cell was designed. Three (Ni-Fe-Ni) electrodes are used, and electrolysis is carried out at a rate of 2.45 g per h with constant current density of 120 mA per cm2.

View Article and Find Full Text PDF

Glass vials are the most widely used primary containers for the packaging of parenteral products due to their optical clarity, general inertness, and hermetic properties, but under certain circumstances, they can pose safety concerns. Most of these issues are related to the potential formation of glass particulates through delamination or precipitation, resulting from the chemical interaction between the drug product and the inner surface of the glass vial. Hence, it is imperative for pharmaceutical companies to conduct product-vial compatibility studies to determine the appropriate packaging/container closure system.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!