The adherence and dissociation of Candida albicans, C. tropicalis, Streptococcus mutans and S. sanguis to six substrates including hydroxylapatite (HAP) which exhibit various hydrophobicity, was examined by the use of a bioluminescent adenosine triphosphate (ATP) assay. Dissolution of HAP by C. albicans or S. mutans was determined spectrophotometrically by the use of o-cresolphthalein complexone. In the adherence of C. tropicalis, S. mutans and S. sanguis, the amount of adherent cells correlated with the hydrophobicity of the substrates. In contrast, the adherence of C. albicans to HAP was extraordinary high, although the adherence of the fungi also correlated with the hydrophobicity of the substrates, except for HAP. The yeasts attached to HAP was effectively removed by high concentration of either phosphate or calcium ions. The amount of calcium-release from HAP caused by C. albicans and S. mutans was 113 microg ml(-1) (final pH = 3.45), and 5.4 microg ml(-1) (final pH 4.81), respectively and the maximum growth of C. albicans and S. mutans was 10(7) cfu ml(-1) and 7.4 x 10(12) cfu ml(-1), respectively. The results, taken together, suggest that C. albicans adhere to HAP specifically through electrostatic interaction, and that, in a much smaller number (1.0/7.4 x 10(5)), C. albicans possesses the ability to dissolve HAP to a greater extent (approximately 20-fold) when compared with S. mutans.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1046/j.0933-7407.2003.00888.x | DOI Listing |
Bioorg Chem
January 2025
Fujian Key Laboratory of Oral Diseases, Fujian Biological Materials Engineering and Technology Center of Stomatology, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, Fujian 350004, China; Department of Prosthodontics, School and Hospital of Stomatology, Fujian Medical University, Fuzhou 350001, China. Electronic address:
Among individuals who wear removable dentures, there is a significant likelihood, reaching up to 70 %, of experiencing a condition known as denture-induced stomatitis. To address this issue, a commonly used method involves soaking dentures in denture cleansers to eliminate microorganisms. However, the prolonged use of this cleaning method has resulted in the emergence of drug resistance.
View Article and Find Full Text PDFAsian Pac J Cancer Prev
January 2025
Department of Rural Clinical Science, La Trobe Rural Health School, La Trobe University, Melbourne, Australia.
Objective: To compare the salivary profiles of smokers (e-cigarette smokers, e-cigarette and former conventional cigarette smokers, dual users, and conventional cigarette smokers) and non-smokers in adolescents, focusing on acidity level, flow rate, viscosity, as well as the quantity of Streptococcus mutans, Porphyromonas gingivalis, and Candida albicans.
Methods: This analytical observational study, with a cross-sectional design, involves collecting saliva samples from five groups through the draining method. Saliva viscosity was assessed visually, while saliva flow rate was monitored over a ten-minute period.
Dent J (Basel)
December 2024
Department of Odontology and Oral Pathology, George Emil Palade University of Medicine, Pharmacy, Science, and Technology of Targu Mures, 38 Gh. Marinescu Str., 540139 Târgu Mureș, Romania.
: Microorganisms are the leading cause of infections in the root canal system, contributing to the failure of endodontic treatments. This in vitro study aimed to compare the antimicrobial effects of four different endodontic sealers: Endomethasone N (Septodont, Saint Maur-des-Fossés, France), Sealapex (Kerr Corporation, Orange, CA, USA), AH Plus Jet (Dentsply DeTrey GmbH, Konstanz, Germany), and MTA Fillapex (Angelus, Londrina, Brazil). : The sealers were tested against common oral pathogens, including Enterococcus faecalis, Staphylococcus aureus, Escherichia coli, Candida albicans, and Streptococcus mutans, using the agar diffusion method.
View Article and Find Full Text PDFEur J Oral Sci
January 2025
Department of Biology, Faculty of Science, Ege University, Izmir, Turkiye.
The aims of this study were twofold: first, to investigate the surface roughness of different abutment materials prepared using various manufacturing methods; and, second, to evaluate colonization by Streptococcus mutans and Candida albicans according to abutment material and manufacturing method. Six material/manufacturing method combinations were investigated in this study, namely chromium-cobalt (Cr-Co) (prepared using casting, milling, and laser sintering) and titanium, zirconia, and anodized titanium (all prepared using milling); titanium (stock) abutments were used as the control group. Surface roughness of seven specimens from each group was evaluated using atomic force microscopy and scanning electron microscopy.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Jiangsu Engineering Laboratory of Novel Functional Polymeric Materials, Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Suzhou Key Laboratory of Soft Material and New Energy, College of Chemistry, Chemical Engineering and Materials Science, Soochow University, Suzhou 215123, China.
Owing to the high invasion depth and easy formation of biofilms, the treatment of subcutaneous fungal infection is intractable and challenging. Herein, we report an injectable and biodegradable hydrogel with bactericidal, quorum sensing inhibition and antioxidant activities for the in situ treatment of subcutaneous fungal infection. The hydrogel (BEPE) was constructed by irradiating mixed bovine serum albumin (BSA), ε-polylysine and epigallocatechin gallate (EGCG)-loaded mesoporous polydopamine (PDA) under near-infrared (NIR) light.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!