In the present study, silver-doped silica thin films were successfully prepared by sol-gel method to apply for antibacterial materials. The starting solution was prepared from 1:0.24:3.75:2.2 molar ratios of Si(OC2H5)4):AgNO3:H2O:C2H5OCH2CH2OH and then the pH value controlled at 3 with 0.5 N HNO3 solution. The formation of silver-doped glassy silica thin films at various temperatures was investigated through infrared spectroscopy, ultraviolet-visible, scanning electron microscopy and X-ray diffraction. From these analysis data, it was found that silver ions were completely trapped in the silica matrix and their reduction could be achieved at 600 degrees C annealing temperature. The antibacterial effects of silica thin films against Escherichia coli and Staphylococcus aureus were examined by film attachment method. The coating films had an excellent antibacterial performance.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/s0142-9612(03)00415-0 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Silk-Corn Zein Alloy Materials: Influence of Silk Types (Mori, Thai, Muga, Tussah, and Eri) on the Structure, Properties, and Functionality of Insect-Plant Protein Blends.
Int J Mol Sci
December 2024
Department of Physics and Astronomy, Rowan University, Glassboro, NJ 08028, USA.
Biocompatible materials fabricated from natural protein polymers are an attractive alternative to conventional petroleum-based plastics. They offer a green, sustainable fabrication method while also opening new applications in biomedical sciences. Available from several sources in the wild and on domestic farms, silk is a widely used biopolymer and one of the strongest natural materials.
View Article and Find Full Text PDFMultilayer Graphene Stacked with Silver Nanowire Networks for Transparent Conductor.
Materials (Basel)
January 2025
Department of Physics, Changwon National University, Changwon 51140, Republic of Korea.
A mechanically robust flexible transparent conductor with high thermal and chemical stability was fabricated from welded silver nanowire networks (w-Ag-NWs) sandwiched between multilayer graphene (MLG) and polyimide (PI) films. By modifying the gas flow dynamics and surface chemistry of the Cu surface during graphene growth, a highly crystalline and uniform MLG film was obtained on the Cu foil, which was then directly coated on the Ag-NW networks to serve as a barrier material. It was found that the highly crystalline layers in the MLG film compensate for structural defects, thus forming a perfect barrier film to shield Ag NWs from oxidation and sulfurization.
View Article and Find Full Text PDFAn Investigation of the Indentation Elastic Modulus for Metal Films on Flexible Substrates Considering the Substrate Effect.
Materials (Basel)
January 2025
Materials Research Centre for Energy and Clean Technology, School of Materials Science and Engineering, Andong National University, Andong 36729, Republic of Korea.
The accurate measurement of the elastic modulus of thin metal films on flexible substrates is critical for understanding the mechanical reliability of flexible electronics. However, conventional methods, such as the Oliver-Pharr model, often underestimate the modulus due to substrate effects, particularly with low-modulus substrates like polyimide (PI). In this study, we propose an improved weighting model that replaces the empirical weighting factor with a variable X to better account for substrate contributions.
View Article and Find Full Text PDFUnveiling the Influence of Hot Carriers on Photovoltage Formation in Perovskite Solar Cells.
Materials (Basel)
December 2024
Laboratory of Electronic Processes, Center for Physical Sciences and Technology, Saulėtekio Ave. 3, LT-10257 Vilnius, Lithuania.
The experimental and theoretical study of photovoltage formation in perovskite solar cells under pulsed laser excitation at 0.53 μm wavelength is presented. Two types of solar cells were fabricated on the base of cesium-containing triple cation perovskite films: (1) Cs(FAMA)Pb(IBr) and (2) Cs(FAMA)PbSn(IBr).
View Article and Find Full Text PDFCorona Poling Enabling Gravure Printing of Electroactive Flexible PVDF-TrFE Devices.
Materials (Basel)
December 2024
Portici Research Centre, ENEA-Italian National Agency for New Technologies, Energy and Sustainable Economic Development, 80055 Portici, Italy.
Polyvinylidene fluoride (PVDF)-based materials are the most researched polymers in the field of energy harvesting. Their production in thin-film form through printing technologies can potentially offer several manufacturing and performance advantages, such as low-cost, low-temperature processing, use of flexible substrates, custom design, low thermal inertia and surface-scaling performance. However, solution-based processes, like printing, miss fine control of the microstructure during film-forming, making it difficult to achieve a high level of polarization, necessary for PVDF to exhibit electroactive characteristics.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!