Cross-linked hydroxypropylmethylcellulose (HPMC) cast films with citric acid as polycarboxylic cross-linker were elaborated to study the effect of cross-linking level on various properties. Increased amounts of cross-linking agent were not connected to statistically different tensile strength and Young's modulus. Whatever the cross-linking level of the film was, the ultimate elongation parameter decreased by approximately 60% compared to the HMPC control film. Moisture sorption isotherms and water contact angle meter showed that the effect of cross-linking degree tends to reduce the hygroscopic and hydrophilic characteristics of films. In addition, to control bacteria growth on food surfaces, the antimicrobial activity of both 98% cross-linked HPMC-nisin and control HPMC-nisin films was tested on Micrococcus luteus. Despite the incorporation of a significant content of nisin, cross-linked HPMC-nisin films were completely inactive on the microbial strain compared to the HPMC-nisin control films. Cross-linking conditions likely either denatured the nisin or irreversibly bound nisin to the cross-linked HPMC. However, nisin adsorbed into films made from previously cross-linked HPMC maintained its activity.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/jf0302613 | DOI Listing |
Mater Today Bio
February 2025
Department of Physical Chemistry and Materials Science, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Műegyetem rkp. 3., H-1111, Budapest, Hungary.
Mucosal membranes with strong variability in their viscoelastic properties line numerous organs and are often targeted by mucoadhesive formulations, e.g., highly swellable hydroxypropylmethylcellulose (HPMC) and slightly cross-linked poly(acrylic acid) (PAA) tablets.
View Article and Find Full Text PDFBiomacromolecules
December 2024
Department of Sustainable Biomaterials, Virginia Tech, Blacksburg, Virginia 24061, United States.
Cellulose esters are used in Food and Drug Administration-approved oral formulations, including in amorphous solid dispersions (ASDs). Some bear substituents with terminal carboxyl moieties (e.g.
View Article and Find Full Text PDFAAPS PharmSciTech
September 2024
Department of Pharmaceutics and Clinical Pharmacy, Faculty of Pharmacy, Sohag University, Sohag, 82524, Egypt.
Int J Biol Macromol
December 2023
School of Chemical Engineering and Light Industry, Guangdong University of Technology, No. 100 Waihuan Xi Road, Panyu District, Guangzhou 510006, People's Republic of China.
In this study, cinnamon essential oil and tea polyphenols were added to chitosan/ polyvinyl alcohol/ hydroxypropyl methylcellulose/ alizarin composite films to enhance their mechanical and functional properties. Their addition to the composite films enhanced their antibacterial and antioxidant properties and significantly improved its elongation at break (p < 0.05).
View Article and Find Full Text PDFInt J Biol Macromol
May 2023
State Key Laboratory of Metastable Materials Science and Technology, Hebei Key Laboratory of Applied Chemistry, Hebei Key Laboratory of Nanobiotechnology, Hebei Key Laboratory of Heavy Metal Deep-Remediation in Water and Resource Reuse, Yanshan University, Qinhuangdao 066004, China. Electronic address:
Conducting polymer hydrogels have emerged as promising materials to fabricate highly sensitive strain sensors. However, due to weak bindings between conducting polymer and gel network, they usually suffer from limited stretchability and large hysteresis, failing to achieve wide-range strain sensing. Herein, we combine hydroxypropyl methyl cellulose (HPMC), poly (3,4-ethylenedioxythiophene):poly (styrene sulfonic acid) (PEDOT: PSS) with chemically cross-linked polyacrylamide (PAM) to prepare a conducting polymer hydrogel for strain sensors.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!