Objectives: To study the microstructure of a palladium-free gallium-based alloy (Galloy) before and after mixing to identify the metallic phases produced by the setting reaction and assess the quantitative elemental analysis of the phases present.
Methods: The Galloy powder was analyzed using X-ray diffraction (XRD) and scanning electron microscopy (SEM) and the particle size distribution was determined using a high resolution particle size analyzer. Cylindrical test specimens were mechanically condensed in accordance with ISO 1559: 1986 for XRD, energy dispersive spectroscopy (EDS) and SEM analyses of the set alloy. Disc shaped specimens were prepared by manual condensation to compare the width of the reaction zone with specimens condensed mechanically.
Results: The Galloy powder consisted of spherical particles varying between 0.1 and 40 microm in diameter which contained a network of grooves and clefts extending deep within the substance of the particles. The reaction zone appeared 'grainy' and 'fragmented' compared with the well defined reaction zone previously observed for Pd-containing gallium-based alloys. The student t-test indicated the width of reaction zone varied significantly (P<0.001) with method of specimen fabrication.Significance. The significantly larger reaction zone in the manually condensed specimens was possibly due to failure of the condensation technique to force out excessive liquid alloy present in the triturated mass. The surface topography of the Pd-free Galloy powder particles could be responsible for the characteristically fragmented and ill-defined reaction zone observed in the set material compared with the well defined reaction zone previously observed for Pd-containing gallium-based alloys.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/s0109-5641(03)00009-5 | DOI Listing |
Nanomaterials (Basel)
January 2025
Research Laboratory Neuroelectronics and Memristive Nanomaterials (NEUROMENA Lab), Institute of Nanotechnologies, Electronics and Electronic Equipment Engineering, Southern Federal University, Taganrog 347922, Russia.
This paper presents the results of a study on the formation of nanostructures of electrochemical titanium oxide for neuromorphic applications. Three anodization synthesis techniques were considered to allow the formation of structures with different sizes and productivity: nanodot, lateral, and imprint. The mathematical model allowed us to calculate the processes of oxygen ion transfer to the reaction zone; the growth of the nanostructure due to the oxidation of the titanium film; and the formation of TiO, TiO, and TiO oxides in the volume of the growing nanostructure and the redistribution of oxygen vacancies and conduction channel.
View Article and Find Full Text PDFOrg Lett
January 2025
Pfizer Oncology Medicinal Chemistry, 10770 Science Center Drive, San Diego, California 92121, United States.
General procedures for the rhodium-catalyzed annulation of aryl/heteroaryl -pivaloyl hydroxamic acids and norbornadiene have been developed. Employing norbornadiene as an acetylene equivalent enables utilization of diverse heterocyclic substrates for this transformation which fail to react or undergo competitive Lossen rearrangement under previously reported conditions. Microwave heating significantly reduces reaction times compared to conventional protocols and allows a one-step process to be realized.
View Article and Find Full Text PDFAbscission is a tightly regulated process in which plants shed unnecessary, infected, damaged, or aging organs, as well as ripe fruits, through predetermined abscission zones in response to developmental, hormonal, and environmental signals. Despite its importance, the underlying mechanisms remain incompletely understood. This study highlights the deleterious effects of abscission on chloroplast ultrastructure in the cells of the tomato flower pedicel abscission zone, revealing spatiotemporal differential gene expression and key transcriptional networks involved in chloroplast vesiculation during abscission.
View Article and Find Full Text PDFChem Commun (Camb)
January 2025
School of Chemistry and Chemical Engineering, Inner Mongolia University, Hohhot 010021, P. R. China.
Neodymium iron boron (NdFeB) magnets are critical components in green energy technologies and have received increasing attention due to the limited availability of the raw materials, specifically rare earth elements (REEs). The supply risks associated with primary mining of RE ores, which have significant environmental impacts, underscore the necessity for recycling RE secondary resources. Waste NdFeB magnets, generated during manufacturing processes and recovered from end-of-life products, represent valuable RE secondary resources.
View Article and Find Full Text PDFLangmuir
January 2025
State Key Laboratory of Water Resources Engineering and Management, Wuhan University, Wuhan 430072, China.
Mineral precipitation is ubiquitous in natural and engineered environments, such as carbon mineralization, contaminant remediation, and oil recovery in unconventional reservoirs. The precipitation process continuously alters the medium permeability, thereby influencing fluid transport and subsequent reaction kinetics. The diversity of preferential precipitation zones controls flow and transport efficiency as well as the capacity of mineral sequestration and immobilization.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!