Purpose: The purpose of this work was to investigate spray-freezing into liquid (SFL) and atmospheric freeze-drying (ATMFD) as industrial processes for producing micronized SFL powders with enhanced aqueous dissolution. Micronized SFL powders dried by ATMFD were compared with vacuum freeze-dried SFL powders.
Method: Danazol was formulated with polyvinyl alcohol (MW 22,000), polyvinylpyrrolidone K-15, and poloxamer 407 to produce micronized SFL powders that were freeze-dried under vacuum or dried by ATMFD. The powders were characterized using Karl-Fischer titration, gas chromatography, differential scanning calorimetry, X-ray diffraction, scanning electron microscopy, surface area, and dissolution testing (SLS 0.75%/Tris 1.21% buffer media).
Results: Micronized SFL powders containing amorphous drug were successfully dried using the ATMFD process. Micronized SFL powders contained less than 5% w/w and 50 ppm of residual water and organic solvent, respectively, which were similar to those contents detected in a co-ground physical mixture of similar composition. Micronized SFL powders dried by ATMFD had lower surface areas than powders produced by vacuum freeze-drying (5.7 vs. 8.9 m2/g) but significantly greater surface areas than the micronized bulk drug (0.5 m2/g) and co-ground physical mixture (1.9 m2/g). Rapid wetting and dissolution occurred when the SFL powders were introduced into the dissolution media. By 5 min, 100% dissolution of danazol from the ATMFD-micronized SFL powder had occurred, which was similar to the dissolution profile of the vacuum freeze-dried SFL powder.
Conclusions: Vacuum freeze-drying is not a preferred technique in the pharmaceutical industry because of scalability and high-cost concerns. The ATMFD process enables commercialization of the SFL particle-engineering technology as a micronization method to enhance dissolution of hydrophobic drugs.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1023/a:1022628826404 | DOI Listing |
Front Microbiol
May 2024
Regenerative Medicine Research Center, Sichuan University West China Hospital, Chengdu, China.
Background: Intestinal microbiota have been demonstrated to be involved in the development of NAFLD, while the relationship between the severity of NAFLD and intestinal microbiota is still not fully elucidated. Sheng-Jiang Powder (SJP) showed exact efficacy in treating SFL and great potential in regulating intestinal microbiota, but the effects need to be further addressed in NASH and liver fibrosis.
Objectives: To investigate the differences in intestinal microbiota of NAFLD with different severity and the effect of SJP on liver damage and intestinal microbiota.
Medicina (Kaunas)
February 2023
Department of Pharmaceutical Chemistry, College of Pharmacy, King Saud University, P.O. Box 2457, Riyadh 11451, Saudi Arabia.
This study presents the development and validation of the 96-microwell-based spectrofluorimetric (MW-SFL) and high performance liquid chromatography (HPLC) with fluorescence detection (HPLC-FD) methods for the quantitation of alectinib (ALC) in its bulk powder form and in urine samples. The MW-SFL was based on the enhancement of the native fluorescence of ALC by the formation of micelles with the surfactant cremophor RH 40 (Cr RH 40) in aqueous media. The MW-SFL was executed in a 96-microwell plate and the relative fluorescence intensity (RFI) was recorded by utilizing a fluorescence plate reader at 450 nm after excitation at 280 nm.
View Article and Find Full Text PDFMaterials (Basel)
October 2021
Department of Materials Engineering and Construction Processes, Faculty of Civil Engineering, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland.
The aim of this article is to predict the compressive strength of environmentally friendly concrete modified with eggshell powder. For this purpose, an optimized artificial neural network, combined with a novel metaheuristic shuffled frog leaping optimization algorithm, was employed and compared with a well-known genetic algorithm and multiple linear regression. The presented results confirm that the highest compressive strength (46 MPa on average) can be achieved for mix designs containing 7 to 9% of eggshell powder.
View Article and Find Full Text PDFPharmaceutics
June 2018
Department of Chemical and Biological Engineering, University of Sheffield, Mappin Street, Sheffield S1 3JD, UK.
This paper focuses on investigating the influence of varying barrel fill levels on the mean residence time, granule properties (median size, size distribution, and shape), and tensile strength of tablets. Specific feed load (SFL) (powder feed rate divided by screw speed) and powder feed number (PFN) (i.e.
View Article and Find Full Text PDFWaste Manag
June 2014
Department of Environmental Engineering, Kyonggi University, Suwon, Republic of Korea.
In order to recycle the linear type of SFL (spent fluorescent lamp), mercury from SFL should be controlled to prevent leaking into the environment. For mercury emission from SFL, mercury concentration is estimated in the parts of SFL such as glass tube, phosphor powder, and base cap using the end-cutting unit. It is also evaluated mercury emission in the effluent gas in the end-cutting unit with changing flow rate.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!