The aim of this study was to highlight the possibility of using recycled wool-based nonwoven material as a sorbent in an oil spill cleanup. This material sorbed higher amounts of base oil SN 150 than diesel or crude oil from the surface of a demineralized or artificial seawater bath. Superficial modification of material with the biopolymer chitosan and low-temperature air plasma led to a slight decrease of sorption capacity. Loose fibers of the same origin as nonwoven material have significantly higher sorption capacities than investigated nonwoven material. White light scanning interferometry analysis of the fibers suggested that roughness of the wool fiber surface has an important role in oil sorption. The laboratory experiments demonstrated that this material is reusable. Recycled wool-based nonwoven material showed good sorption properties and adequate reusability, indicating that a material based on natural fibers could be a viable alternative to commercially available synthetic materials that have poor biodegradability.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/es0201303 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Silver Nanoparticles-Functionalized Textile against SARS-CoV-2: Antiviral Activity of the Capping Oleylamine Molecule.
ACS Appl Mater Interfaces
January 2025
Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro 21941-909, Brazil.
COVID-19 disease, triggered by SARS-CoV-2 virus infection, has led to more than 7.0 million deaths worldwide, with a significant fraction of recovered infected people reporting postviral symptoms. Smart surfaces functionalized with nanoparticles are a powerful tool to inactivate the virus and prevent the further spreading of the disease.
View Article and Find Full Text PDFComparison of the Influence of Polypropylene (PP) or Polybutylene Terephthalate (PBT)-Based Meltblown and Polyester/Polyamide-Based Hydroentangled Inner Layers on the Sound and Thermal Insulation Properties of Layered Nonwoven Composite Structures.
Polymers (Basel)
January 2025
Department of Textile Engineering, Faculty of Engineering, Erciyes University, 38039 Kayseri, Türkiye.
Thermal and sound insulation play a vital role in today's world, and nonwoven composite structures including microfiber layers provide efficient solutions for addressing these demands. In this study, the sound and thermal insulation properties of nonwoven composite structures, including single-layer meltblown, multilayer meltblown, hydroentangled, and nanofiber nonwoven inner layers, were compared statistically by using Design Expert 13 software. The inner layer type and outer layer type of the composite structures were considered as independent variables, and thickness, bulk density, air permeability, sound absorption coefficient, and thermal resistance of composite structures were evaluated as dependent variables during statistical analyses.
View Article and Find Full Text PDFThe Effect of Textile Structure Reinforcement on Polymer Composite Material Mechanical Behavior.
Polymers (Basel)
December 2024
Faculty of Technology, Goce Delcev University, Krste Misirkov 10-A, P.O. Box 201, 2000 Shtip, North Macedonia.
Investigating the impact of textile structure reinforcement on the mechanical characteristics of polymer composites produced by the compression molding technique was the goal of this work. An epoxy resin system served as the matrix, and various woven (plain, twill, basket), nonwoven (mat), and unidirectional (UD) textile structures made from E-glass fibers were employed as reinforcement elements. Compression molding of pre-impregnated textile materials (prepregs) was used to create the composites.
View Article and Find Full Text PDFElectret Nonwoven Structures for High-Efficiency Air Filtration, Produced Using the Blow Spinning Technique.
Materials (Basel)
December 2024
Faculty of Chemical and Process Engineering, Warsaw University of Technology, 00-645 Warsaw, Poland.
This study explores the fabrication of electret nonwoven structures for high-efficiency air filtration, utilizing the blow spinning technique. In response to the growing need for effective filtration systems, we aimed to develop biodegradable materials capable of capturing fine particulate matter (PM2.5) without compromising environmental sustainability.
View Article and Find Full Text PDFAnti-dendrite separator interlayer enabling staged zinc deposition for enhanced cycling stability of aqueous zinc batteries.
Nat Commun
January 2025
Faculty of Materials Science and Energy Engineering, Shenzhen University of Advanced Technology, Shenzhen, China.
Aqueous zinc ion batteries exhibit great prospects due to their low cost and high safety, while their lifespan is limited by severe dendritic growth problems. Herein, we develop an anti-dendrite hot-pressing separator interlayer through a mass-producible hot-pressing strategy, by spreading metal-organic framework (MOF) precursor on nonwoven matrix followed by a simple hot-pressing process. The in situ modification of MOF crystals on fiber surface processes abundant nitrogenous functional groups and high specific surface area (190.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!