Continuous analysis of dissolved gaseous mercury in freshwater lakes.

The concentration of dissolved gaseous mercury (DGM) in freshwaters changes more quickly than the 40-min processing time of current analytical methods. A new method for continuous field analysis of DGM was developed using a Tekran 2537A to achieve a DGM analysis time of 5 min. Samples were concurrently analyzed for temperature, oxygen, conductivity, pH, and oxidation-reduction potential using a Hydrolab. The detection limit for DGM ranged between 5 and 20 fmolL(-1) with 99% removal efficiency. Control experiments showed that there was no interference due to methyl mercury, which is present in similar concentrations to DGM. Controlled experiments comparing continuous DGM analysis with discrete DGM analysis showed that the results are not significantly affected by typical variations in water temperature (4-30 degrees C), oxidation-reduction potential (135-355 mV), dissolved organic carbon (4.5-10.5 mgL(-1)), or pH (3.5-7.8). The continuous analysis was within 4.5% of the discrete analysis when compared across 12 samples analyzed in triplicate. The field performance of this method was tested over two 48-h periods in two lakes in Kejimkujik Park, Nova Scotia where over 1000 data points were collected.