Small-scale mining in developing countries is generally labour-intensive and carried out with low levels of mechanization. In the Mererani area in the northern part of Tanzania, there are about 15000 underground miners who are constantly subjected to a poor working environment. Gemstones are found at depths down to 500 m. The objectives of this pilot study were to monitor the exposure to dust during work processes, which are typical of small-scale mining in developing countries, and to make a rough estimation of whether there is a risk of chronic pulmonary diseases for the workers. Personal sampling of respirable dust (n = 15) and 'total' dust (n = 5) was carried out during three consecutive days in one mine, which had a total of 50 workers in two shifts. Sampling started immediately before the miners entered the shaft, and lasted until they reappeared at the mine entrance after 5-8 h. The median crystalline silica content and the combustible content of the respirable dust samples were 14.2 and 5.5%, respectively. When drilling, blasting and shovelling were carried out, the exposure measurements showed high median levels of respirable dust (15.5 mg/m(3)), respirable crystalline silica (2.4 mg/m(3)), respirable combustible dust (1.5 mg/m(3)) and 'total' dust (28.4 mg/m(3)). When only shovelling and loading of sacks took place, the median exposures to respirable dust and respirable crystalline silica were 4.3 and 1.1 mg/m(3). This study shows that the exposure to respirable crystalline silica was high during underground small-scale mining. In the absence of personal protective equipment, the miners in the Mererani area are presumably at a high risk of developing chronic silicosis.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1093/annhyg/meg027 | DOI Listing |
Bioabsorbable metallic alloys constitute a very challenging and innovative field, mainly aimed to develop the next generation of temporary medical implants. Degradation data, biological and tests are of major importance in particular for complex alloys, in which the individual element additions could enhance material performance and add functionalities. In this study, a novel Fe-Mn-Si-Cu alloy was carefully designed for vascular and blood-contact applications, and its microstructure, mechanical behavior, degradation behavior and biological performances were investigated accordingly.
View Article and Find Full Text PDFHeliyon
December 2024
Centre for Settlements Studies, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana.
Environ Monit Assess
December 2024
Department of Environmental Studies, North-Eastern Hill University, Shillong, Meghalaya, India.
In this study, we assessed the changes in the physical and chemical characteristics of the soil samples collected from the artisanal and small-scale limestone mining site in Sohra (Cherrapunjee), Meghalaya, by comparing them with the non-mining site. Eleven distinct soil parameters, namely pH, electrical conductivity (EC), texture (ST), moisture content (MC), bulk density (BD), total porosity (TP), water holding capacity (WHC), organic carbon (OC), total nitrogen (TN), available phosphorus (AP), and exchangeable potassium (EK), were evaluated seasonally (winter, pre-monsoon, and post-monsoon) for 2 years. The results showed that limestone mining has significantly affected the soil quality.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
January 2025
Department of Civil, Environmental, Architectural Engineering and Mathematics, University of Brescia, Via Branze 43, 25123, Brescia, Italy.
Environmental problems persist due to mercury from artisanal and small-scale gold mining (ASGM) as well as ecological problems associated with the macrophyte Eichhornia crassipes Martius (EC). Environmental problems persist due to mercury contamination from artisanal and small-scale gold mining (ASGM) and ecological issues related to the macrophyte Eichhornia crassipes Martius (EC). A bioaccumulation study was conducted on mercury-laden wastewater (WWm) from ASGM using a pilot treatment plant, specifically a constructed wetland system (CW) with the macrophyte species EC.
View Article and Find Full Text PDFJ Occup Health
January 2024
Research Officer (H), International Cooperation Section, Ministry of Ayush, New Delhi, India.
Objectives: Work-related musculoskeletal disorders (WMSDs) are among the most common occupational diseases, affecting various sectors such as agriculture, small-scale industries, handicrafts, construction, and banking. These disorders, caused by overexertion and repetitive motion, lead to work absenteeism, productivity loss, and economic impacts. The aim of the study was to determine the magnitude of musculoskeletal disorders among different occupational workers in India.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!