Gas permeable materials improve safety of life saving appliances.

Int Marit Health

Hamburg Port Health Center, Seewartenstrasse 10, 20459 Hamburg, Germany.

Published: April 2003

Spray-hoods are additional items of life jackets. They are very effective in reducing water contact of the breathing openings when victims have to stay in rough seas without boat or life raft. A life raft is also a very important life saving device. But both have a system problem. They consist of a more or less encapsulated space in which humans have to breathe. To ensure a sufficient amount of oxygen and to reduce the amount of carbon dioxide, spray-hoods have ventilation openings which reduce the efficiency of this equipment, but most of the life rafts have no ventilation. In a series of tests we used a new gas permeable material for the hoods. This reduced the flooding of victims to a very little amount, while O2 and CO2 stayed at acceptable levels. Our experiments with conventional rafts showed that the O2 level went down to less than 15% within 50 minutes while CO2 went up to 6%. These are dangerous levels. The canopy of some of the life rafts were modified with the above mentioned new gas permeable material. Identical rafts were used in comparative trials. The tests showed positive results for the new material. The minimum O2 level stayed at 20.2% and CO2 reached a maximum of 0.52%. The results prove that this material can lead to a much safer rescue system than the systems used so far.

Download full-text PDF

Source

Publication Analysis

Top Keywords

gas permeable
12
life saving
8
life raft
8
raft life
8
life rafts
8
permeable material
8
life
7
permeable materials
4
materials improve
4
improve safety
4

Similar Publications

Clarifying the pore-throat size and pore size distribution of tight sandstone reservoirs, quantitatively characterizing the heterogeneity of pore-throat structures, is crucial for evaluating reservoir effectiveness and predicting productivity. Through a series of rock physics experiments including gas measurement of porosity and permeability, casting thin sections, scanning electron microscopy, and high-pressure mercury injection, the quality of reservoir properties and microscopic pore-throat structure characteristics were systematically studied. Combined with fractal geometry theory, the effects of different pore throat types, geometric shapes and scale sizes on the fractal characteristics and heterogeneity of sandstone pore throat structure are clarified.

View Article and Find Full Text PDF

Selective O/N Separation Using Grazyne Membranes: A Computational Approach Combining Density Functional Theory and Molecular Dynamics.

Nanomaterials (Basel)

December 2024

Departament de Ciència de Materials i Química Física, Institut de Química Teòrica i Computacional (IQTCUB), Universitat de Barcelona, C/Martí i Franquès 1-11, 08028 Barcelona, Spain.

The separation of oxygen (O) and nitrogen (N) from air is a process of utmost importance nowadays, as both species are vital for numerous fundamental processes essential for our development. Membranes designed for their selective molecule separation have become the materials of choice for researchers, primarily due to their ease of use. The present study proposes grazynes, 2D carbon-based materials consisting of and C atoms, as suitable membranes for separating O and N from air.

View Article and Find Full Text PDF

The application of nanocomposites based on polyacrylamide hydrogels as well as silica nanoparticles in various tasks related to the petroleum industry has been rapidly developing in the last 10-15 years. Analysis of the literature has shown that the introduction of nanoparticles into hydrogels significantly increases their structural and mechanical characteristics and improves their thermal stability. Nanocomposites based on hydrogels are used in different technological processes of oil production: for conformance control, water shutoff in production wells, and well killing with loss circulation control.

View Article and Find Full Text PDF

Preparation and Performance Evaluation of CO Foam Gel Fracturing Fluid.

Gels

December 2024

Key Laboratory of Unconventional Oil & Gas Development, China University of Petroleum (East China), Ministry of Education, Qingdao 266580, China.

The utilization of CO foam gel fracturing fluid offers several significant advantages, including minimal reservoir damage, reduced water consumption during application, enhanced cleaning efficiency, and additional beneficial properties. However, several current CO foam gel fracturing fluid systems face challenges, such as complex preparation processes and insufficient viscosity, which limit their proppant transport capacity. To address these issues, this work develops a novel CO foam gel fracturing fluid system characterized by simple preparation and robust foam stability.

View Article and Find Full Text PDF

Long-term polymer flooding exacerbates reservoir heterogeneity, intensifying intra- and inter-layer conflicts, which makes it difficult to recover the remaining oil. Therefore, further improvement in oil recovery after polymer flooding is essential. In this study, a weak gel system was successfully synthesized, and possesses a distinct network structure that becomes more compact as the concentration of partially hydrolyzed polyacrylamide increases.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!