Unlabelled: The aim of the study was to make a direct comparison of the pulpal effects of laser and turbine preparations in subhuman primates. One female baboon (Papio Ursinus ursinus), weighing 15 kg, was used. General anaesthesia was administered (ketamine 100 mg/ml/kg body weight) and maintained with acepromazine (10 mg/ml/kg body weight). Class V cavities were prepared buccally in a total of 28 teeth (7 in each quadrant). Teeth in the upper right and lower left quadrants were prepared using a conventional 330 carbide bur in a high-speed fibre-optic handpiece with copious water spray. Teeth in the upper left and lower right quadrants were prepared using an Er:YAG laser drill (Fotona Twinlight, Llubljana, Slovenia) delivering 500 mJ at a pulse rate of 10 Hz and a wavelength of 2940 nm. The animal was sacrificed after 25 days. After general anaesthesia as described before, perfusion fixation of the head was accomplished with 10% neutral buffered formalin, pumped through a catheter inserted into the left carotid artery. The jaws were removed and, using a 330 carbide bur in a high speed handpiece, a continuous groove was cut through the bone and the roots at the level of the middle third of all the roots to promote thorough fixation of pulpal tissue. Decalcification and grading of the severity of the pulpal responses were conducted according to standard procedures.
Results: Owing to procedural errors seven teeth, FDI numbers 23, 24, 31, 34, 35, 44 and 45, had to be eliminated. The turbine-prepared teeth (N = 11) had a mean remaining dentine thickness (RDT) of 0.77 mm (SD = 0.42) and the laser-prepared teeth (N = 10) had a mean RDT of 0.81 mm (SD = 0.60). All pulps appeared normal except in one turbine-prepared tooth (12 with RDT = 0.20) and one laser-prepared tooth (27 with RDT = 0.30, where irreversible damage was caused. The only other deviations from normal were seen in the laser-treated 41 (RDT = 0.69) and the turbine-treated 36 (RDT = 0.77) where moderate hyperaemia was seen. Within the limitations of this study it can be concluded that there is no significant difference between dental pulp of teeth where Class V cavities were prepared with an Er:YAG laser drill compared with those prepared with a standard turbine drill.
Download full-text PDF |
Source |
---|
J Prosthodont Res
January 2025
Department of Orthodontics, Osaka Dental University, Hirakata, Japan.
Purpose: To perform vertical bone augmentation on rat parietal bone by coating the inner surface of dense polytetrafluoroethylene (d-PTFE) domes with hydroxyapatite (HA) using Erbium Yttrium Aluminum Garnet (Er:YAG) pulsed laser deposition in a rat model.
Methods: The d-PTFE plate surface, α-tricalcium phosphate (α-TCP) coating, and HA coating were measured using scanning electron microscopy and X-ray diffraction to confirm the replacement of α-TCP with HA via high-pressure steam sterilization. The dome was glued to the center of the rat parietal bone and closed with periosteal and epithelial sutures.
Heliyon
November 2024
Department of Orthodontics, Faculty of Dentistry, University of Health Sciences, Turkey.
Aim: To evaluate the shear bond strength (SBS) of ceramic and metallic orthodontic brackets bonded to lithium disilicate ceramics or hybrid ceramics and subjected to different surface conditioning treatments.
Materials And Methods: In total, 300 specimens were fabricated from GC LiSi (lithium disilicate) and GC Cerasmart (hybrid) ceramic blocks. The specimens were divided into four groups according to the following surface treatments: hydrofluoric acid (HF); sandblasting with 50 μm aluminum oxide; Monobond Etch and Prime; and erbium-doped yttrium aluminum garnet (Er-YAG) laser.
Braz Dent J
July 2024
Conservative Dentistry Department, Faculty of Dentistry, Cairo University, Egypt. Postal Code: 11553.
ER:YAG laser and experimental resin-based dental adhesive loaded with functionalized carbonated apatite filler were used in this study to evaluate the dentin interaction in terms of penetration and occlusion of the dentinal tubules aiding in the control of dentin hypersensitivity (DH). Spheroidal Carbonated apatite nanoparticles (N-CAP), with an average size of 20±5 nm diameter, were synthesized, characterized, and incorporated in a universal adhesive "All Bond Universal, Bisco, USA", in (2% weight) concentration. Er:YAG laser "Lightwalker, FOTONA, EU" was adjusted to an energy output of 40mJ/ pulse and pulse repetition of 10 Hz for 10 seconds.
View Article and Find Full Text PDFLasers Med Sci
April 2024
Department of Periodontology, Hamidiye Dental Faculty, University of Health Sciences, Istanbul, Turkey.
Aim: The aim of the present study was to evaluate the efficacy of 30-angled Er:YAG laser tip and different periodontal instruments on root surface roughness and morphology in vitro.
Methods: Eighteen bovine teeth root without carious lesion were decoronated from the cementoenamel junction and seperated longitidunally. A total of 36 obtained blocks were mounted in resin blocks and polished with silicon carbide papers under water irrigation.
J Lasers Med Sci
November 2023
School of Dentistry, University of São Paulo, São Paulo, São Paulo, Brazil.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!