Mechanical properties of oligomer-modified acrylic bone cement.

Biomaterials

Department of Prosthetic Dentistry & Biomaterials Research, Institute of Dentistry, University of Turku, Lemminkäisenkatu 2, FIN-20520 Turku, Finland.

Published: February 2003

The aim of this study was to determine the mechanical properties of acrylic bone cement modified with an experimental oligomer filler, based on an amino acid of trans-4-hydroxy-L-proline synthesized in the laboratory. The test specimens were tested either dry, or after being stored in distilled water or in simulated body fluid (SBF) for 1 week and then tested in distilled water. The three-point bending test was used to measure the flexural strength and flexural modulus of the cement, and the compression tests were used to measure the compression strength and modulus. One test specimen from each group was examined under a scanning electron microscope (SEM) to determine the nature of the oligomer filler in the polymethylmethacrylate-polymethylacrylate copolymer-based (PMMA-PMA/PMMA) polymer blend. In dry conditions, the flexural strength of the test specimens tested in air was 66 MPa, and the compression strength was 93 GPa (p<0.001) for the plain bone cement. For the test specimens including 20 wt% of oligomer filler, the flexural strength was 37 MPa, and the compression strength was 102 MPa(p<0.001) in dry conditions. The storage in wet conditions (in distilled water and the SBF) decreased the flexural strength of the test specimens with 20 wt% of oligomer filler (p<0.001) by 60% and the flexural modulus by 44% compared to the plain bone cement specimens stored in the same conditions. The reduction in compression strength in wet conditions was 32%, and that of the compression modulus was 30% (p<0.001). No significant differences were found between test specimens stored in distilled water or SBF (ANOVA, p<0.001). In the SEM examinations, random voids were observed in the oligomer-PMMA-PMA/PMMA polymer blend after water or SBF storage. The results suggest that both water and SBF storage decrease the mechanical properties of the PMMA-PMA/PMMA bone cement modified with oligomer, while at the same time, there was porous formation in the bone cement structure.

Download full-text PDF

Source
http://dx.doi.org/10.1016/s0142-9612(02)00354-xDOI Listing

Publication Analysis

Top Keywords

mechanical properties
8
acrylic bone
8
bone cement
8
oligomer filler
8
test specimens
8
specimens tested
8
distilled water
8
flexural strength
8
compression strength
8
properties oligomer-modified
4

Similar Publications

The emerging field of quantum life science combines principles from quantum physics and biology to study fundamental life processes at the molecular level. Quantum mechanics, which describes the properties of small particles, can help explain how quantum phenomena such as tunnelling, superposition, and entanglement may play a role in biological systems. However, capturing these effects in living systems is a formidable challenge, as it involves dealing with dissipation and decoherence caused by the surrounding environment.

View Article and Find Full Text PDF

Effect of Ultrasound Treatment on Structural and Physical Properties of Native Maize Starch.

Plant Foods Hum Nutr

January 2025

Instituto de Ciencia y Tecnología de Alimentos Córdoba (ICYTAC) - CONICET-UNC, Av. Juan Filloy S/N, Ciudad Universitaria, Córdoba, Argentina.

The focus of this work was to evaluate the differences between the thermal and mechanical effects generated by ultrasound waves on the properties of corn starch, which facilitate the subsequent enzymatic hydrolysis for the generation of porous starches. The results showed that both the thermal and mechanical effects have the capacity to disorganize/alter the structure of starch, impacting on its properties. Characteristics such as particle size, pasting and thermal properties (peak viscosity 1400-1800 cp.

View Article and Find Full Text PDF

Chinese herbal medicine-inspired construction of multi-component hydrogels with antibacterial and wound-healing-promoting functions.

J Mater Chem B

January 2025

Collaborative Innovation Center for Advanced Organic Chemical Materials Co-constructed by the Province and Ministry, Ministry-of-Education Key Laboratory for the Synthesis and Application of Organic Functional Molecules, College of Chemistry and Chemical Engineering, Hubei University, Wuhan 430062, P. R. China.

Chinese herbal medicine (CHM) has offered a great treasure and source of inspiration for developing innovative medicinal materials and therapy. In this work, inspired by the macroscopic compatibility of and in CHM, the puerarin (PUE) and CaSO (Ca) as the main constituents, respectively, from the two herbs are co-assembled into two-component molecular hydrogels. Such two-component gels exhibited enhanced mechanical properties compared with the single-component PUE gel due to the introduction of crosslinking hydrogen bonds between PUE and Ca.

View Article and Find Full Text PDF

Two-dimensional (2D) nanomaterials are at the forefront of potential technological advancements. Carbon-based materials have been extensively studied since synthesizing graphene, which revealed properties of great interest for novel applications across diverse scientific and technological domains. New carbon allotropes continue to be explored theoretically, with several successful synthesis processes for carbon-based materials recently achieved.

View Article and Find Full Text PDF

Fabrication of Hypoxia-Mimicking Supramolecular Hydrogels for Cartilage Repair.

ACS Appl Bio Mater

January 2025

Regenerative Medicine and Stem Cell Laboratory (RMS), Department of Biomedical Engineering, Indian Institute of Technology Hyderabad, Kandi 502 284, Telangana, India.

Despite advancements in chronic arthritis treatment, there remains a significant demand for advanced nanotechnologies capable of efficiently delivering a wide range of therapeutic agents to provide symptomatic relief and facilitate the healing of inflamed cartilage tissue. Considering the significant impact of hypoxia on the development and maintenance of chondral tissue, replicating its effects on stem cells could be a potential approach for the treatment of osteoarthritis (OA). Cobalt is a prominent hypoxia-inducing agent, owing to its ability to activate the hypoxia-inducible factor (HIF) pathway regardless of cellular oxygen levels.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!