Using a field-based model, mechanical transmission of porcine reproductive and respiratory syndrome virus (PRRSV) wa assessed throughout a coordinated sequence of events that replicated common farm worker behavior during cold weather (< 0 degrees C). The model involved fomites (boots and containers), vehicle sanitation, transport, and the movement of personnel. A field strain of PRRSV was inoculated into carriers consisting of snow and water, and carriers were adhered to the undercarriage of a vehicle. The vehicle was driven approximately 50 km to a commercial truck washing facility where the driver's boots contacted the carriers during washing, introducing the virus to the vehicle interior. The vehicle was then driven 50 km to a simulated farm site, and the driver's boots mechanically spread virus into the farm anteroom. Types of containers frequently employed in swine farms (styrofoam semen cooler, metal toolbox, plastic lunch pail, and cardboard animal health product shipping parcel) contacted drippings from footwear on the anteroom floor. The truck wash floor, vehicle cab floor mats, boot soles, anteroom floor, and the ventral surface of containers were sampled to track the virus throughout the model. Ten replicates were conducted, along with sham-inoculated controls. At multiple sampling points PRRSV nucleic acid was detected in 8 of 10 replicates. In each of the 8 PCR-positive replicates, infectious PRRSV was detected on the surfaces of containers by virus isolation or swine bioassay. All sham-inoculated controls were negative. These results indicate that mechanical transmission of PRRSV can occur during coordinated sequence of events in cold weather.
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC227010 | PMC |
Polymers (Basel)
January 2025
Jožef Stefan Institute, Department of Physical and Organic Chemistry, Jamova c. 39, SI-1000 Ljubljana, Slovenia.
The study aimed to develop a superhydrophobic coating on the aluminium alloy 2024-T3 surface. The desired surface roughness and low surface energy were achieved with SiO nanoparticles, synthesised via the Stöber method and modified with alkyl silane (AS) or perfluoroalkyl silane (FAS). To enhance particle adhesion to the alloy substrate, nanoparticles were incorporated into a hybrid sol-gel coating composed of tetraethyl orthosilicate, methyl methacrylate, and 3-methacryloxypropyl trimethoxysilane.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Department of Mechanical and Aerospace Engineering, Politecnico di Torino, 10129 Turin, Italy.
This study investigates the potential of deploying a neural network model on an advanced programmable logic controller (PLC), specifically the Finder Opta™, for real-time inference within the predictive maintenance framework. In the context of Industry 4.0, edge computing aims to process data directly on local devices rather than relying on a cloud infrastructure.
View Article and Find Full Text PDFSensors (Basel)
January 2025
Advanced Institute of Convergence Technology, 145 Gwanggyo-ro, Yeongtong-gu, Suwon-si 16229, Gyeonggi-do, Republic of Korea.
According to South Korea's Ministry of Employment and Labor, approximately 25,000 construction workers suffered from various injuries between 2015 and 2019. Additionally, about 500 fatalities occur annually, and multiple studies are being conducted to prevent these accidents and quickly identify their occurrence to secure the golden time for the injured. Recently, AI-based video analysis systems for detecting safety accidents have been introduced.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
School of Physical and Technology, Wuhan University, Wuhan 430072, China.
Aluminum and its alloys are widely used in the busbar structures of electrolytic aluminum production. However, they are prone to corrosion and wear damage during use, leading to a decline in current-transmission efficiency and potentially causing safety issues. To repair damaged aluminum busbars, this paper explores the feasibility of using cold spraying technology for surface restoration.
View Article and Find Full Text PDFMaterials (Basel)
January 2025
College of Materials Science and Engineering, Chongqing University, Chongqing 400045, China.
Laser shock peening (LSP) is an effective method for enhancing the fatigue life and mechanical properties of Ti alloys. However, there is limited research on the effects of LSP on crystal structure and dislocation characteristics. In this study, Ti-6Al-4V alloy was subjected to laser shock peening with varying laser power levels.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!