In atomic force microscope studies of thin films often a defined jump of the tip through the film is observed once a certain threshold force has been exceeded. In particular, on lipid bilayers this is regularly observed. In a previous paper [H.-J. Butt and V. Franz, Phys. Rev. E 66, 031601 (2002)] we presented two complementary models to describe film rupture. The aim of this study was to verify these models. Experiments were done with solid supported bilayers consisting of dioleoyloxypropyl-trimethylammonium chloride (DOTAP) and dioleoylphosphatidylserine (DOPS) in aqueous solutions and with propanol. Both models describe experimental results adequately. In particular, a narrow distribution of yield forces and an increase of the mean yield force with increasing loading rate is correctly predicted. For the lipid bilayers spreading pressures of roughly 20 mN/m (DOTAP) and 5 mN/m (DOPS) were measured. Line tensions for the edge of a lipid bilayer ranged between 3 (DOTAP) and 6 pN (DOPS).
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/PhysRevE.66.031602 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Microwave welding with SiCNW/PMMA nanocomposite thin films: Enhanced joint strength and performance.
Nanotechnology
January 2025
Universiti Teknologi PETRONAS, Centre of Innovative Nanostructures and Nanodevices (COINN), Universiti Teknologi PETRONAS, 32610 Seri Iskandar, Perak Darul Ridzuan, MALAYSIA, Seri Iskandar, Perak, 32610, MALAYSIA.
Most previously reported susceptors for microwave welding are in powder form. In this study, a thin-film susceptor was employed due to its uniform heating rate and ease of handling. Silicon carbide nanowhisker (SiCNW) were incorporated into a poly(methyl methacrylate) (PMMA) matrix to create a nanocomposite thin film, which served as the susceptor.
View Article and Find Full Text PDFLong-Life Zinc Anodes via Molecular-Layer-Deposited Inorganic-Organic Hybrid Titanicone Thin Films.
ACS Appl Mater Interfaces
January 2025
National Laboratory of Solid-State Microstructure, College of Engineering and Applied Sciences, Collaborative Innovation Center of Advanced Microstructures, Jiangsu Key Laboratory of Artificial Functional Materials, Nanjing University, Nanjing 210093, P. R. China.
Zinc-ion batteries (ZIBs) have consistently faced challenges related to the instability of the zinc anode. Uncontrolled dendrite growth, hydrogen evolution reaction (HER), and byproduct accumulation on the zinc anode severely affect the cycling life of ZIBs. Herein, inorganic-organic hybrid thin films of titanicones (Ti-based hydroquinone, TiHQ) were fabricated by molecular layer deposition (MLD) technology to modify the zinc metal anode.
View Article and Find Full Text PDFOrganic Crosslinked Tin Oxide Mitigating Buried Interface Defects for Efficient and Stable Perovskite Solar Cells.
Angew Chem Int Ed Engl
January 2025
Southern University of Science and Technology, Department of Materials Science and Engineering, NO.1088,Xueyuan Avenue,Nanshan District, 518055, Shenzhen, CHINA.
Tin dioxide (SnO2) stands as a promising material for the electron transport layer (ETL) in perovskite solar cells (PSCs) attributed to its superlative optoelectronic properties. The attainment of superior power conversion efficiency hinges critically on the preparation of high-quality SnO2 thin films. However, conventional nanoparticle SnO2 colloids often suffer from inherent issues such as numerous oxygen vacancy defects and film non-uniformity.
View Article and Find Full Text PDFFast response solid electrolyte oxygen sensors with porous thin film electrodes.
Rev Sci Instrum
January 2025
High Enthalpy Flow Diagnostics Group (HEFDiG), Institute of Space Systems, University of Stuttgart, Pfaffenwaldring 29, 70569 Stuttgart, Germany.
A novel solid electrolyte sensor with considerably improved response times is presented. The new so-called eFIPEX [etched flux (Φ) probe experiment] is based on the FIPEX [flux (Φ) probe experiment] sensor applied for the measurement of molecular and atomic oxygen concentrations. A main application is the measurement of atmospheric atomic oxygen aboard sounding rockets up to altitudes of 250 km.
View Article and Find Full Text PDFFrequency-domain thermoreflectance with beam offset without the spot distortion for accurate thermal conductivity measurement of anisotropic materials.
Rev Sci Instrum
January 2025
Department of Micro Engineering, Graduate School of Engineering, Kyoto University, Kyotodaigaku-Katsura C3, Nishikyo-ku, Kyoto 615-8540, Japan.
The measurement of thermal conductivities of anisotropic materials and atomically thin films is pivotal for the thermal design of next-generation electronic devices. Frequency-domain thermoreflectance (FDTR) is a pump-probe technique that is known for its accurate and straightforward approach to determining thermal conductivity and stands out as one of the most effective methodologies. Existing research has focused on advancing a measurement system that incorporates beam-offset FDTR.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!