The CuO-MoO3/gamma-Al2O3 catalyst, confirmed previously as having good activity in the catalytic incineration of (CH3)2S2, was employed as the principal catalyst in this study. With the aim of improving catalyst activity and resistance to deactivation by sulfur compounds, a promoter was added either before adding the precursors of Cu and Mo or together with Cu and Mo onto the gamma-Al2O3. Promoters included transition metals and elements from groups IA-VIIA in the chemical periodic table. Experimental results reveal Cr2O3 as the most effective promoter, with an optimal composition of 5 wt.% Cu, 6 wt.% Mo and 4 wt.% Cr (designated as Cu(5)-Mo(6)-Cr(4)/gamma-Al2O3). Knowing that higher acidity can improve activity, we further investigated the effect of acid treatment on the performance of the Cu(5)-Mo(6)-Cr(4)/gamma-Al2O3 catalyst. Experimental results indicate the H2SO4-treated catalyst (Cu(5)-Mo(6)-Cr(4)/sulfated-gamma-Al2O3) has a better activity and durability. A study for finding an appropriate rate expression for the catalytic incineration of (CH3)2S2 by Cu(5)-Mo(6)-Cr(4)/sulfated-gamma-Al2O3 was carried out in a differential reactor. The results show that the Mars-Van Krevelen model is applicable to this destructive oxidation reaction. Results additionally reveal that competitive adsorption of CH4 reduces conversion of (CH3)2S2.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/s0045-6535(02)00273-4 | DOI Listing |
Chem Sci
January 2025
Centre for Membrane Separations, Adsorption, Catalysis and Spectroscopy for Sustainable Solutions (cMACS), KU Leuven Celestijnenlaan 200F, Post Box 2454 3001 Leuven Belgium
Plastic waste conversion into valuable chemicals is a promising alternative to landfill or incineration. In particular, the chemical upcycling of polybutadiene rubber (PBR) could provide a renewable route towards highly desirable α,ω-dienes with varying chain lengths, which can find ample industrial application. While previous research has shown that the treatment of polybutadiene with a consecutive hydrogenation and ethenolysis reaction can afford long-chain α,ω-dienes, achieving precise control over the product chain length remains an important bottleneck.
View Article and Find Full Text PDFNat Commun
January 2025
State Key Laboratory of Pollution Control and Resource Reuse, School of Environment, Nanjing University, Nanjing, 210023, PR China.
The unique properties of nanomaterials offer vast opportunities to advance sustainable processes. Incidental nanoparticles (INPs) represent a significant part of nanomaterials, yet their potential for sustainable applications remains largely untapped. Herein, we developed a simple strategy to harness INPs to upgrade the waste-to-resource paradigm, significantly reducing the energy consumption and greenhouse gas emissions.
View Article and Find Full Text PDFWaste Manag
December 2024
Jiangsu Key Laboratory of E-waste Recycling, School of Resources and Environmental Engineering, Jiangsu University of Technology, Changzhou 213001, PR China. Electronic address:
There are hazardous substances such as chloride salts and heavy metals in the municipal solid waste incineration fly ash (WIFA). During thermal treatment, the concentrated chlorides promote the volatilization of heavy metals, increasing the ecological risk. The water washing method is also employed as a pre-treatment for WIFA, but a substantial volume of wastewater with high chloride content is produced that poses challenges for effective treatment.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
January 2025
Department of Chemistry and Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, iChEM (Collaborative Innovation Center of Chemistry for Energy Materials), Fudan University, Shanghai, 200433, China.
Polymer-based organic electrodes for rechargeable batteries are attractive due to their design flexibility, sustainability, and environmental compatibility. Unfortunately, waste management of conventional polymer materials typically involves incineration, which emits greenhouse gases. Consequently, degradable polymers should be ideal candidates for future green batteries.
View Article and Find Full Text PDFSci Total Environ
January 2025
Guangzhou Institute of Advanced Technology, Guangzhou 511458, China.
Two traditional methods, including incineration and the sequencing batch reactor activated sludge process (SBR), and two emerging methods, including supercritical water oxidation (SCWO), catalytic wet oxidation (CWO) combined with SBR (CWO-SBR), for high concentration organic wastewater treatment were compared from the view of environmental impact. The printing ink wastewater generated from the surface treatment of electronic products was selected as the typical wastewater and diluted to various concentrations for sensitivity analysis. Simapro 9.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!