Elastic constants measured by Brillouin light-scattering experiments were compared with results estimated from the pulse-echo-overlap method for the ultrasonic frequency to find dispersion in their values. In this way Brillouin hypersonic experiments complete the ultrasonic results. The present investigation includes a careful analysis of the accuracy of the results. The measured values of elastic constants suggest a weak dispersion in acoustic wave velocities. However, given the magnitude of the experimental errors, it is difficult to conclude about the dispersion.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/s0041-624x(02)00374-8 | DOI Listing |
Nanotechnology
January 2025
MME, Wright State University, 3640 Colonel Glenn Hwy, Lake Campus, 7600 Lake Drive, Lake Campus, Fairborn, Ohio, 45435, UNITED STATES.
Surface induced crystallization/amorphization of a Germanium-antimony-tellurium (GST) nanolayer is investigated using the phase field model. A Ginzburg-Landau (GL) equation introduces an external surface layer (ESL) within which the surface energy and elastic properties are properly distributed. Next, the coupled GL and elasticity equations for the crystallization/amorphization are solved.
View Article and Find Full Text PDFSci Rep
January 2025
Water Management Research Institute, National Water Research Center, Shubra El-Kheima 13411, Cairo, Egypt.
The exploration of perovskite compounds incorporating actinide and divalent elements reveals remarkable characteristics. Focusing on PbBkO, RaBkO, and SrBkO, these materials were studied using density functional theory (DFT) via the CASTEP code to analyze their electronic, optical, and mechanical properties. The results show semiconductor behavior, with respective band gaps of 1.
View Article and Find Full Text PDFACS Omega
December 2024
Department of Materials Science and Engineering, Norwegian University of Science and Technology, NTNU, Sem Sælands vei 12, 7034 Trondheim, Norway.
In thermosetting epoxies, thermomechanical properties can be enhanced by conscious selection of curing agents. Full cross-linking leads to a maximum in the glass- transition temperature. However, the relation between the glass transition temperature and the epoxy matrix depends on several factors beyond the cross-linking degree, such as the molecular weight of the polymers, network organization, amount of branching, and the presence of hydrogen bonds.
View Article and Find Full Text PDF3D Print Addit Manuf
October 2024
Industry Engineering Department, School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an, P.R. China.
The varied material and the inherent complex microstructure make predicting the effective stiffness of fused deposition modeling (FDM) printed polylactic acid (PLA)/carbon fiber (CF) composite a troublesome problem. This article proposes a microstructure scanning electron microscope (SEM) mapping modeling and numerical mean procedure to calculate the effective stiffness of FDM printing PLA/CF laminates. The printed PLA/CF parts were modeled as a continuum of 3D uniform linear elasticity with orthotropic anisotropy, and their elastic behavior was characterized by orthotropic constitutive relations.
View Article and Find Full Text PDFBiomech Model Mechanobiol
December 2024
Bioengineering, University of California, Santa Barbara, Santa Barbara, United States.
The heart is a dynamic pump whose function is influenced by its mechanical properties. The viscoelastic properties of the heart, i.e.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!