Lamb waves are normally utilized for inspecting thin metal sheets. Wheel type probes using piezoelectric oscillators have generally been used as the sensors for Lamb waves. Recently, the electromagnetic acoustic transducer (EMAT) has been developed and is beginning to be used as a Lamb wave detector. We have developed a useful type of transducer for Lamb waves. The new EMAT consists of a meander coil with a narrow distance of 2.5 mm and has a symmetrical structure in the vertical direction for both surface sides. The new EMAT can generate Lamb waves with variable wavelengths corresponding to the frequency range from approximately 300 kHz to 2.5 MHz and multiple modes, and can also generate selected symmetrical and anti-symmetrical mode Lamb waves. It is demonstrated that the optimum Lamb wave mode could be produced by the appropriate positioning of the EMATs and controlling the phase (same or inversed) of the electrical signal driving the device. The described EMAT can be used to examine steel (or other material) sheets of different thickness. It is also shown that the S0 (0.3 MHz) mode Lamb wave is the most effective for the deepest (up to 6 mm) penetration.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/s0041-624x(02)00164-6 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
An adversarial transformer for anomalous lamb wave pattern detection.
Neural Netw
January 2025
Department of Mechanical Engineering, University of South Carolina, Columbia, SC 29208, USA. Electronic address:
Lamb waves are widely used for defect detection in structural health monitoring, and various methods are developed for Lamb wave data analysis. This paper presents an unsupervised Adversarial Transformer model for anomalous Lamb wave pattern detection by analyzing the spatiotemporal images generated by a hybrid PZT-scanning laser Doppler vibrometer (SLDV). The model includes the global attention and the local attention mechanisms, and both are trained adversarially.
View Article and Find Full Text PDFWave ripples formed in ancient, ice-free lakes in Gale crater, Mars.
Sci Adv
January 2025
Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, USA.
Symmetrical wave ripples identified with NASA's Curiosity rover in ancient lake deposits at Gale crater provide a key paleoclimate constraint for early Mars: At the time of ripple formation, climate conditions must have supported ice-free liquid water on the surface of Mars. These features are the most definitive examples of wave ripples on another planet. The ripples occur in two stratigraphic intervals within the orbitally defined Layered Sulfate Unit: a thin but laterally extensive unit at the base of the Amapari member of the Mirador formation, and a sandstone lens within the Contigo member of the Mirador formation.
View Article and Find Full Text PDFAssessment of interfacial properties in a two-layered plate using quasi-static component generation during primary Lamb wave propagation.
Ultrasonics
January 2025
College of Aerospace Engineering, Chongqing University, Chongqing 400044, China. Electronic address:
This study delves into the feasibility of leveraging quasi-static component (QSC) generation during primary Lamb wave propagation to discern subtle alterations in the interfacial properties of a two-layered plate. Unlike the second-harmonic generation of Lamb waves, QSC generation doesn't necessitate precise phase-velocity matching but rather requires an approximate matching of group velocities to ensure the emergence of cumulative growth effects. This unique characteristic empowers the QSC-based nonlinear ultrasonic method to effectively surmount the limitations associated with inherent dispersion and multimode traits of Lamb wave propagation.
View Article and Find Full Text PDFCharacterization of Micro-Crack Orientation in a Thin Plate Using Quasi-Static Component Generated by Incident Ultrasonic Lamb Waves.
Sensors (Basel)
January 2025
Key Laboratory of Testing Technology for Manufacturing Process MOE, Southwest University of Science and Technology, Mianyang 621010, China.
The directivity of the quasi-static component (QSC) is quantitatively investigated for evaluating the orientation of a micro-crack buried in a thin solid plate using the numerical simulation method. Based on the bilinear stress-strain constitutive model, a three-dimensional (3D) finite element model (FEM) is built for investigating the nonlinear interaction between primary Lamb waves and the micro-crack. When the primary Lamb waves at A0 mode impinge on the micro-crack, under the modulation of the contact acoustic nonlinearity (CAN), the micro-crack itself will induce QSC.
View Article and Find Full Text PDFCorrosion Monitoring in Automotive Lap Joints Based on Imaging Methods of Lamb Waves.
Sensors (Basel)
December 2024
School of Energy and Power Engineering, Beihang University, Beijing 100191, China.
Corrosion damage presents significant challenges to the safety and reliability of connected vehicles. However, traditional non-destructive methods often fall short when applied to complex automotive structures, such as bolted lap joints. To address this limitation, this study introduces a novel corrosion monitoring approach using Lamb wave-based weighted fusion imaging methods.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!