Man-made vitreous fibers (MMVF) are classified within the European Union (EU) as carcinogenic category 3 (possibly carcinogenic), but criteria exist to exonerate fibers from this classification. The HT stone wool fiber type is a MMVF that fulfills European regulatory requirements for exoneration from classification as a carcinogen based on in vivo testing. The chemical composition of the fibers and the results of the in vivo and in vitro studies that defined the chemical compositional range for a CAS registry number for these fibers are presented and discussed. Results from in vitro dissolution measurements at pH 4.5 of 52 fiber compositions (9-23 wt% Al(2)O(3) and 32-47 wt% SiO(2)) ranging from traditional stone wool to the biosoluble HT fibers are presented. The results are evaluated as a function of the ratio Al/(Al+Si) in the glass network and as a function of the fraction of Si-O-Si linkages in the glass. It is suggested that the dissolution mechanism for these fibers relates to the density of the surface silica layer on dissolving fibers and that the fraction of Si-O-Si linkages influences this.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1006/rtph.2001.1523 | DOI Listing |
Arch Toxicol
December 2024
Fraunhofer Institute for Toxicology and Experimental Medicine ITEM, Nikolai-Fuchs Str. 1, 30625, Hannover, Germany.
Man-made vitreous fibers (MMVF) comprise diverse materials for thermal and acoustic insulation, including stone wool. Depending on dimension, durability, and dose, MMVF might induce adverse health effects. Therefore, early predictive in vitro (geno)toxicity screening of new MMVF is highly desired to ensure safety for exposed workers and consumers.
View Article and Find Full Text PDFMaterials (Basel)
April 2024
Department of Building and Environmental Technology, Lund University, 221 00 Lund, Sweden.
In recent years, there has been a paradigm shift in the building sector towards more sustainable, resource efficient, and renewable materials. Bio-based insulation derived from renewable resources, such as plant or animal fibres, is one promising group of such materials. Compared to mineral wool and polystyrene-based insulation materials, these bio-based insulation materials generally have a slightly higher thermal conductivity, and they are significantly more hygroscopic, two factors that need to be considered when using these bio-based insulation materials.
View Article and Find Full Text PDFWaste Manag Res
September 2024
Institute for Technology and Testing of Building Materials, Graz University of Technology, Graz, Austria.
Mineral wool is commonly used in construction as thermal insulation material. After the product's lifetime, it is classified as hazardous waste if no trademark of the European Certification Board for Mineral Wool Products (EUCEB) or the German Institute for Quality Assurance and Labelling (RAL) exists. Mineral Wool Waste (MWW) is typically landfilled in Europe, which is challenging due to its low bulk density and dimensional stability.
View Article and Find Full Text PDFOpen Res Eur
February 2024
Fibre and Particle Engineering Research Unit, University of Oulu, Oulu, Northern Ostrobothnia, 90014, Finland.
Background: Stone wool is commonly used as a plant substrate in soilless cultivation and discarded after one growing season. Stone wool waste is difficult to recycle, and thus it is typically landfilled. Alkali-activation of stone wool (i.
View Article and Find Full Text PDFJ Prosthet Dent
April 2024
Reader, Department of Oral Medicine and Radiology, Amrita School of Dentistry, Amrita Vishwa Vidyapeetham, Kochi, India.
Statement Of Problem: Different tissue adhesives are available for retaining extraoral silicone prostheses in maxillofacial defects. Comparative assessment of their mechanical properties will help the clinician select the right product for a specific clinical situation, but a systematic review is lacking.
Purpose: The purpose of this systematic review was to analyze the existing data in the literature regarding 5 mechanical properties of tissue adhesives for extraoral silicone prostheses: peel strength, tensile strength, shear strength, torsional strength, and tack.
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!