Background: Younger patients (those who are less than fifty years old) have been shown to have a high rate of failure of cemented acetabular components following total hip arthroplasty. In this report, we present the results associated with the use of an uncemented acetabular component in young patients who were evaluated at a minimum of nine years postoperatively.
Methods: Between December 1984 and December 1989, the senior author performed 174 primary total hip arthroplasties with use of a single design of porous-coated acetabular component. Seventy-one of these procedures were performed in fifty-six patients who were younger than fifty years old. Fifty-six of the seventy-one hips were available for radiographic and clinical analysis after a mean duration of follow-up of eleven years. All hips had been treated with a Harris-Galante-I porous-coated acetabular component that had been placed with a line-to-line fit and fixed with a mean of four screws. Clinical analysis was performed with use of the Harris hip score. Standardized anteroposterior radiographs were analyzed with regard to migration, radiolucent lines, pelvic osteolysis, and two-dimensional linear wear of the polyethylene.
Results: No metal shell was revised because of aseptic loosening, and no shell was loose at the time of the latest follow-up. A nonprogressive radiolucent line was seen in one zone in ten hips (18%) and in two zones in six hips (11%). No hip had a radiolucent line in all three zones. Pelvic osteolysis was noted in thirteen hips (23%); the osteolysis was observed in the ischium in eleven hips and around the screws in two. Survivorship analysis revealed that the probability of survival of the metal shell was 98% (95% confidence interval, 96.9% to 99.9%) at ten years. The mean rate of linear polyethylene wear (and standard deviation) was 0.15 +/- 0.10 mm/yr (range, 0.02 to 0.59 mm/yr). The wear rate was significantly increased in patients with an excellent Harris hip score (p = 0.004) and a younger age (less than thirty-eight years) (p = 0.026). With the numbers available, no relationship could be detected between the wear rate and the gender or weight of the patient, the polyethylene thickness, the abduction angle, or the femoral neck length.
Conclusions: The fixation and survival of porous-coated acetabular metal shells in patients less than fifty years old was excellent after a mean duration of follow-up of eleven years. The high rate of linear polyethylene wear and the high prevalence of pelvic osteolysis are of serious concern in this patient population. Continued follow-up will be necessary to evaluate the influence of these findings on the longevity of the fixation of this prosthesis.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.2106/00004623-200205000-00005 | DOI Listing |
Int Orthop
November 2024
Division of Orthopaedics, Department of Clinical Sciences at Danderyd Hospital, Karolinska Institutet, Entrévägen 2, 182 88, Danderyd, Stockholm, Sweden.
Purpose: Periacetabular bone loss poses a considerable challenge in the longevity and stability of acetabular implants used in total hip arthroplasty (THA). Innovations in implant design, specifically the introduction of three-dimensional (3D) porous titanium constructs, might reduce bone resorption. The purpose of this study was to build upon our previous randomized controlled trial, which found no change in periacetabular bone loss between a 3D porous none-hydroxyapatite coated titanium cup and a standard porous hydroxyapatite coated cup over a two year follow-up period by extending the follow-up duration to ten years post-surgery.
View Article and Find Full Text PDFSurg Technol Int
July 2024
JIS Orthopedics, New Albany, Ohio.
While total hip arthroplasty (THA) is an enormously successful treatment for patients with end-stage degenerative arthritis of the hip, and surgeons have optimized existing hip implants and techniques, dislocation and instability persist as a leading cause of failure. Given the tremendous success of reverse total shoulder arthroplasty in enhancing the stability of shoulder reconstruction by reversing the anatomic seating of the ball and socket components, one manufacturer (Hip Innovation Technology, LLC, Woodstock, Georgia) has developed a novel Reverse Hip Replacement System (Reverse HRS) to address the need for greater stability in reconstruction of the arthritic hip joint. Rather than the traditional anatomic components that replace the head of the femur with a spherical ball and the acetabulum with a socket with polyethylene liner mounted into the pelvis, the Reverse HRS features a cup with polyethylene liner attached to the femoral stem and a spherical metal head attached to a central trunnion inside of the porous-coated acetabular shell fixed into the pelvis.
View Article and Find Full Text PDFTurk J Med Sci
May 2024
Department of Orthopedic Surgery and Traumatology, Pendik Hospital, İstanbul, Turkiye.
Background/aim: Developmental dysplasia of the hip (DDH) is the most common cause of secondary hip arthrosis. The primary purpose of this study was to assess the results of an oversized hemispherical cup via the press-fit technique used for Crowe type II and III DDH without screws and to determine if adequate medialization and initial stability of the acetabular component would allow us to avoid screw and graft use.
Materials And Methods: Between February 2012 and May 2020, the current study analyzed 43 hips with Crowe type II and III DDH treated with a porous-coated cup by placing the press-fit technique or screw.
J Orthop
December 2023
LifeBridge Health, Sinai Hospital of Baltimore, Rubin Institute for Advanced Orthopedics, Baltimore, MD, USA.
Introduction: Several implant manufacturers have developed ultra-porous metal substrate acetabular components recently. Despite this, data on clinical and radiographic outcomes remain limited. Our study evaluated postoperative patient-reported outcome measures (PROMs) and radiographic analyses in patients fitted with a novel acetabular porous-coated component.
View Article and Find Full Text PDFCureus
April 2023
Department of Orthopaedics and Rehabilitation, University of Rochester Medical Center, Rochester, USA.
Introduction: Revision total hip arthroplasty in the setting of acetabular bone loss remains a challenging clinical entity. Deficiencies of the acetabular rim, walls, and/or columns may limit the bony surface area and initial acetabular construct stability necessary for osseointegration of cementless components. Press-fit acetabular components with supplemental acetabular screw fixation represent a common technique aimed to minimize implant micromotion and allow for definitive osseointegration.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!