The production of pullulan from beet molasses by a pigment-free strain of Aztreobasidium pullulans on shake-flask culture was investigated. Combined pretreatment of molasses with sulfuric acid and activated carbon to remove potential fermentation inhibitors present in molasses resulted in a maximum pullulan concentration of 24 g/L, a biomass dry wt of 14 g/L, a pullulan yield of 52.5%, and a sugar utilization of 92% with optimum fermentation conditions (initial sugar concentration of 50 g/L and initial pH of 7.0). The addition of other nutrients as carbon and nitrogen supplements (olive oil, ammonium sulfate, yeast extract) did not further improve the production of the exopolysaccharides. Structural characterization of the isolated polysaccharides from the fermentation broths by 13C-nuclear magnetic resonance spectroscopy and pullulanase digestion combined with size-exclusion chromatography confirmed the identity of pullulan and the homogeneity (>93% dry basis) of the elaborated polysaccharides by the microorganism. Using multiangle laser light scattering and refractive index detectors in conjunction with high-performance size-exclusion chromatography molecular size distributions and estimates of the molecular weight (Mw = 2.1-4.1 x 10(5)), root mean square of the radius of gyration (R = 30-38 nm), and polydispersity index (Mw/Mn = 1.4-2.4) were obtained. The fermentation products of molasses pretreated with sulfuric acid and/or activated carbon were more homogeneous and free of contaminating proteins. In the concentration range of 2.8-10.0 (w/v), the solution's rheologic behavior of the isolated pullulans was almost Newtonian (within 1 and 1200 s(-1) at 20 degrees C); a slight shear thinning was observed at 10.0 (w/v) for the high molecular weight samples. Overall, beet molasses pretreated with sulfuric acid and activated carbon appears as an attractive fermentation medium for the production of pullulan by A. pullulans.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1385/abab:97:1:01 | DOI Listing |
RSC Adv
November 2024
Department of Chemical Engineering, Birla Institute of Technology and Science, Pilani - Hyderabad Campus Shameerpet Hyderabad Telangana-500078 India
The global shift towards sustainable energy sources, necessitated by climate change concerns, has led to a critical review of biohydrogen production (BHP) processes and their potential as a solution to environmental challenges. This review evaluates the efficiency of various reactors used in BHP, focusing on operational parameters such as substrate type, pH, temperature, hydraulic retention time (HRT), and organic loading rate (OLR). The highest yield reported in batch, continuous, and membrane reactors was in the range of 29-40 L H/L per day at an OLR of 22-120 g/L per day, HRT of 2-3 h and acidic range of 4-6, with the temperature maintained at 37 °C.
View Article and Find Full Text PDFBioresour Technol
January 2025
Institute of Bio- and Geosciences - IBG-1: Biotechnology, Forschungszentrum Jülich GmbH, Wilhelm-Johnen-Straße, 52425 Jülich, Germany; Bioeconomy Science Center (BioSC), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany. Electronic address:
α-ketoglutarate (AKG) is a valuable dicarboxylic acid with multiple applications in the food, pharmaceutical, and chemical industries. Its chemical synthesis is associated with toxic by-products, low specificity, and high energy input. To create a more environmentally friendly and sustainable alternative, a microbial production process for AKG was developed.
View Article and Find Full Text PDFJ Air Waste Manag Assoc
January 2025
Department of Environmental Health Engineering, Faculty of Public Health, Tehran University of Medical Sciences, Tehran, Iran.
This study focused on the feasibility of identifying and recycling inorganic phase-change materials (PCMs) from sugar industry wastes in two cities of Qazvin and Hamadan in Iran. In this study, dry sugar beet pomace, sugar beet pomace, sugar beet molasses, leaves and plant residues of sugar beet and sugarcane bagasse were investigated. The inorganic materials were identified by X-ray Diffraction (XRD), thermal characteristics were determined by differential scanning calorimetry (DSC), and morphological characteristics were determined by scanning electron microscopy (SEM).
View Article and Find Full Text PDFFood Sci Nutr
October 2024
Department of Horticultural Sciences Engineering, Faculty of Agriculture and Natural Resources Imam Khomeini International University Qazvin Iran.
Fungal Biol Biotechnol
October 2024
Metabolic Engineering Group, Department of Microbiology and Genetics, Universidad de Salamanca, Campus Miguel de Unamuno, 37007, Salamanca, Spain.
Background: Ashbya gossypii is a filamentous fungus widely utilized for industrial riboflavin production and has a great potential as a microbial chassis for synthesizing other valuable metabolites such as folates, biolipids, and limonene. Engineered strains of A. gossypii can effectively use various waste streams, including xylose-rich feedstocks.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!