Dendritic imides were synthesized and evaluated as antitumor compounds. Compounds 8 and 11 showing a promising profile as inhibitors of lck but their antiproliferative activity against HT-29 was not so relevant.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/s0960-894x(01)00618-7 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A Robust Dual-Layered Solid Electrolyte Interphase Enabled by Cation Specific Adsorption-Induced Built-In Electrostatic Field for Long-Cycling Solid-State Lithium Metal Batteries.
Angew Chem Int Ed Engl
January 2025
Beijing Institute of Technology, Advanced Research Institute of Multidisciplinary Science, 5 Zhongguancun South Street,, Beijing Institute of Technology, 100081, Beijing, CHINA.
Solid-state lithium (Li) metal batteries (SSLMBs) are considered as one of the most promising next-generation battery technologies due to their high energy density and intrinsic safety. However, interfacial issues such as side reactions and Li dendrite growth severely hinder the practical application of SSLMBs. In this contribution, we proposed a cationic built-in electrostatic field to drive the generation of an anion-derived dual-layered solid electrolyte interphase (SEI).
View Article and Find Full Text PDFFabrication of Quasi-Solid Polymer Electrolytes for Lithium Metal Battery via Photopolymerization-Induced Microphase Separation.
ACS Appl Mater Interfaces
January 2025
Universite de Pau et des Pays de l'Adour, E2S UPPA, CNRS, IPREM, 64053, Pau, France.
The photopolymerization-induced microphase separation (photo-PIMS) process involving a reactive polymer block was implemented to fabricate nanostructured quasi-solid polymer electrolytes (QSPEs) for use in lithium metal batteries (LMBs). This innovative one-pot fabrication enhances interfacial properties in LMBs by enabling nanostructuring of QSPE directly onto the electrodes. This process also allows for customization of QSPE structural dimensions by tweaking the architecture and molar mass of poly[(oligo ethylene glycol) methyl ether methacrylate--styrene] (P(OEGMA--S)) macromolecular chain transfer agent.
View Article and Find Full Text PDFThe synergistic effect induced by "Z-bond" between cations and anions achieving a highly reversible zinc anode.
J Colloid Interface Sci
December 2024
Zhejiang Provincial Engineering Research Center of Oxide Semiconductors for Environmental and Optoelectronic Applications, Institute of Wenzhou, Zhejiang University, Wenzhou 325006, PR China; State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou 310027, PR China. Electronic address:
Due to their high energy density, low cost, and environmental friendliness, aqueous zinc-ion batteries are considered a potential alternative to Li-ion batteries. However, dendrite growth and parasitic reactions of water molecules limit their practical applications. Herein, an ionic liquid additive, 1-butyl-3-methylimidazolium Bis(fluorosulfonyl)imide (BMImFSI), is introduced to regulate the electrical double layer (EDL).
View Article and Find Full Text PDFEvaluation of Alternative Lithium Salts for High-Voltage Lithium Ion Batteries: Higher Relevance of Plated Li Morphology Than the Amount of Electrode Crosstalk.
Small
December 2024
MEET Battery Research Center, Institute of Physical Chemistry, University of Münster, Corrensstr. 46, 48149, Münster, Germany.
Increasing the upper cut-off voltage (UCV) enhances the specific energy of Li-ion batteries (LIBs), but is accompanied by higher capacity fade as a result of electrode cross-talk, i.e., transition metals (TM) dissolution from cathode and deposition on anode, finally triggering high surface area lithium (HSAL) formation due to locally enhanced resistance.
View Article and Find Full Text PDFDesign of an LiF-rich interface layer using high-concentration fluoroethylene carbonate and lithium bis(fluorosulfonyl)imide (LiFSI) to stabilize Li metal batteries.
RSC Adv
November 2024
Hangzhou POWCLIN Medical Technology Co., Ltd Hangzhou 311305 China.
The development of high-energy-density Li metal batteries is limited by the uncontrollable growth of Li dendrites and an unstable Li/electrolyte interface during long-term Li plating/stripping. In this work, using high-concentration fluoroethylene carbonate (FEC) electrolyte, an LiF-rich interface layer was generated on the Li metal surface. This LiF-rich interface layer could effectively inactivate the high reactivity of the Li metal surface and suppress lithium dendrite growth, forming a uniform and dense structure at the Li/electrolyte interface to stabilize Li metal batteries.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!