Determinants of exposure to respirable quartz dust in the construction industry.

Ann Occup Hyg

Utrecht University, Utrecht, P.O. Box 238, 6700 AE Wageningen, The Netherlands.

Published: October 2001

Because most masonry building materials contain quartz and because these materials are subjected to a variety of treatments during the building process, quartz is encountered everywhere in building operations. The level of exposure to respirable quartz has been measured for some highly exposed groups of employees. At 30 construction sites personal air sampling (PAS) measurements of respirable dust and quartz have been performed and 171 samples have been taken. Both respirable dust and quartz levels were high. Respirable quartz exposures of more than ten times the Dutch limit value of 0.075 mg/m(3) TWA were common, but exposures up to 200 times the Dutch limit value were also found. The measurements were task oriented. By statistical analysis the contribution of the different determinants to the total exposure has been identified. With this approach, directions for an effective control measures programme can be given.

Download full-text PDF

Source

Publication Analysis

Top Keywords

respirable quartz
12
exposure respirable
8
respirable dust
8
dust quartz
8
times dutch
8
dutch limit
8
quartz
7
respirable
5
determinants exposure
4
quartz dust
4

Similar Publications

This study aimed to test the use of Rietveld refinement on respirable aerosol samples to determine the phase of respirable crystalline silica (RCS) and other minerals. The results from the Rietveld refinement were compared to an external standard method and gravimetrical measurements. Laboratory samples consisting of α-quartz, feldspar, and calcite with variable proportions and total mass loadings were made and analyzed using the NIOSH 7500 , followed by Rietveld refinement.

View Article and Find Full Text PDF

Inhalation exposure to respirable crystalline silica (RCS) during the fabrication of engineered stone-based kitchen countertops has been on the rise in recent years and has become a significant occupational health problem in the United States and globally. Little is known about the presence of nanocrystalline silica (NCS), i.e.

View Article and Find Full Text PDF

Introduction: Previous studies suggest respirable crystalline silica (RCS) is an important driver of resurgent pneumoconiosis among US coal miners. Although greater attention has been focused on dust exposures in underground coal miners, surface miners are also at risk of severe disease. This study explores RCS exposure in this population.

View Article and Find Full Text PDF

The ongoing resurgence of severe Coal Workers' Pneumoconiosis in the US has been linked to overexposure to respirable crystalline silica (RCS, which is predominantly present as quartz and regulated as such). Capabilities that enable more frequent RCS monitoring are highly sought. Recent developments include field-based quartz analysis of traditional filter samples-collected on polyvinyl chloride (PVC) filters-using portable Fourier Transform Infrared spectroscopy (FTIR).

View Article and Find Full Text PDF

Introduction: Overexposure to respirable crystalline silica (RCS) can lead to the development of silicosis and other respiratory diseases. The mine under study was reported to have the highest number of certified cases of pneumoconiosis in Zambia in 2015, and in 2008, a study revealed that 56% of the RCS samples exceeded 0.05 mg/m3.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!