Transport processes through track-etch membrane filters in a reagent delivery cell.

Fresenius J Anal Chem

Institute of Physical and Chemical Analysis, GKSS Research Centre Geesthacht GmbH, Germany.

Published: February 2000

A reagent delivery cell with a track-etch membrane filter for on-line dilution of concentrated salt solutions is described. The influence of several system parameters such as concentration of the stock solution, temperature. transmembrane pressure and the dependence on the diffusion coefficients of several salt components on the dilution was evaluated. As an application example, the use of the reagent delivery cell for on-line calibration of an atomic absorption spectrometer was studied. Fluxes through the membrane filter of 10 to 50 nL mm(-2) min(-1) with relative standard deviations of 0.8% within a day and 1.9% from day to day were achieved. The permeation experiments with the track-etch membrane filter for the dilution of aqueous solutions of several chlorides and sodium salts confirm a diffusion process. Flux rates can be estimated mathematically using Fick's first law with an agreement between measured and calculated dilution factors within 86 to 113%.

Download full-text PDF

Source
http://dx.doi.org/10.1007/s002160050068DOI Listing

Publication Analysis

Top Keywords

track-etch membrane
12
reagent delivery
12
delivery cell
12
membrane filter
12
transport processes
4
processes track-etch
4
membrane
4
membrane filters
4
filters reagent
4
cell reagent
4

Similar Publications

In freshwater environments, low-micrometer microplastics (LMMPs) have captured significant attention due to their prevalence and toxicity. Yet, rapid detection of LMMPs (1-10 μm) at the single-particle level within complex freshwater matrices remains a hurdle. We developed an adaptable plasmonic membrane sensor for fast detection of individual LMMPs in eutrophic lake waters.

View Article and Find Full Text PDF

Integration of 2D Nanoporous Membranes in Microfluidic Devices.

ACS Omega

May 2024

Department of Electrical Engineering, Indian Institute of Technology Hyderabad, Kandi, Sangareddy, Telangana 50228, India.

2D material-based membranes have emerged as promising candidates for next-generation separation technology due to their exceptional permeability and selectivity. Integration of these membranes into microfluidic devices has offered significant potential for improving the efficiency, throughput, and precision. However, designing compact and reliable microfluidic devices with membranes has many challenges, including complexities in membrane integration, analyte measurement, and contamination issues.

View Article and Find Full Text PDF

Open multi-organ communication device for easy interrogation of tissue slices.

Lab Chip

June 2023

Department of Chemistry, University of Cincinnati, 312 College Dr., 404 Crosley Tower, Cincinnati, OH 45221-0172, USA.

Here, we have developed an open multi-organ communication device that facilitates cellular and molecular communication between organ slices. Measuring communication between organs is vital for understanding the mechanisms of health regulation yet remains difficult with current technology. Communication between organs along the gut-brain-immune axis is a key regulator of gut homeostasis.

View Article and Find Full Text PDF

Rapid isolation and cryo-EM characterization of synaptic vesicles from mammalian brain.

FEBS Open Bio

November 2022

National Laboratory of Biomacromolecules, CAS Center for Excellence in Biomacromolecules, Institute of Biophysics, Chinese Academy of Sciences, Beijing, China.

Synaptic vesicles (SVs) store and release neurotransmitters at chemical synapses. Precise regulation of SV trafficking, exocytosis and endocytosis is crucial for neural transmission. Biochemical characterization of SVs, which is essential for research into neurotransmitter uptake and release, requires effective in vitro isolation methods.

View Article and Find Full Text PDF

This paper describes an experimental system for simultaneous permeation of a pressurized test gas through different gas permeable membranes and provides a proof of concept for a novel approach for gas identification/fingerprinting for potential construction of electronic noses. The design, construction, and use of a six-channel system which allows simultaneous gas permeation from a single pressurized gas compartment through six different parallel membranes are presented. The permeated gas is accumulated in confined spaces behind the respective membranes.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!