Determination of toxic glycols and alcohols in an emergency setting requires a rapid yet accurate and reliable method. To simultaneously determine diethylene glycol (DEG) along with ethylene glycol, methanol, isopropanol, acetone, and ethanol, we modified a previously developed gas chromatographic (GC) method. The system used a Hewlett-Packard 6890 GC with EPC, a Gooseneck splitless liner, and an Rtx-200 capillary column (30 m x 0.53-mm i.d., 3 mm). After serum samples were deproteinized using ultrafiltration (Millipore Ultrafree-MC), 1 mL of the protein-free filtrate was manually injected into the GC. Internal standards for alcohols (and acetone) and glycols were n-propanol and 1,3-butanediol, respectively. All compounds eluted within 3.5 min (linear temperature gradient from 40 to 260 degrees C); total run time was 6.5 min. Limit of detection and linear range for all compounds were 1 or 2.5 mg/dL and 0-500 mg/dL, respectively. In addition, there was no interference from propionic acid, propylene glycol, and 2,3-butanediol. The modifications in the equipment and temperature program allowed increased resolution and thus, detection and reliable quantitation of DEG and other common toxic glycols and alcohols of clinical interest.

Download full-text PDF

Source
http://dx.doi.org/10.1093/jat/24.7.621DOI Listing

Publication Analysis

Top Keywords

diethylene glycol
8
ethylene glycol
8
capillary column
8
toxic glycols
8
glycols alcohols
8
glycol
5
simultaneous detection
4
detection quantitation
4
quantitation diethylene
4
glycol ethylene
4

Similar Publications

Permeation Enhancer in Microemulsions and Microemulsion-Based Gels: A Comparison of Diethylene Glycol Monoethyl Ether and Oleyl Alcohol.

Gels

January 2025

Department of Pharmacy Practice, College of Pharmacy and Pharmaceutical Sciences, The University of Toledo, 3000 Arlington Ave, Toledo, OH 43614, USA.

Microemulsions have been commonly used with various permeation enhancers to improve permeability through the skin. The purpose of this study was to compare the release and permeation ability of two commonly used permeation enhancers-diethylene glycol monoethyl ether (DGME) and oleyl alcohol-by the changes in oil composition, the addition of a gelling agent, and water content using ibuprofen as a model drug. Four microemulsions were formulated, selection was based on ternary phase diagrams, and physicochemical properties were evaluated.

View Article and Find Full Text PDF

Sole-Solvent High-Entropy Electrolyte Realizes Wide-Temperature and High-Voltage Practical Anode-Free Sodium Pouch Cells.

Adv Mater

January 2025

School of Chemistry, Key Laboratory of Bio-Inspired Smart Interfacial Science and Technology of Ministry of Education, Beihang University, Beijing, 100191, China.

Anode-free sodium batteries (AFSBs) hold great promise for high-density energy storage. However, high-voltage AFSBs, especially those can stably cycle at a wide temperature range are challenging due to the poor electrolyte compatibility toward both the cathode and anode. Herein, high-voltage AFSBs with cycling ability in a wide temperature range (-20-60 °C) are realized for the first time via a sole-solvent high-entropy electrolyte based on the diethylene glycol dibutyl ether solvent (D2) and NaPF salt.

View Article and Find Full Text PDF

Assessing the impact of different solvents in the bacterial reverse mutation test.

Environ Mol Mutagen

January 2025

Department of Pharmacology and Toxicology, Zydus Research Centre, Zydus Lifesciences Limited, Ahmedabad, Gujarat, India.

The bacterial reverse mutation test is essential for identifying the mutagenic potential of chemicals. The solubility of the test substance is vital for achieving the recommended assay concentration. Preferred solvents like dimethyl sulfoxide and water are chosen for their compatibility and historical data.

View Article and Find Full Text PDF

Programmable organization of uniform organic/inorganic functional building blocks into large-scale ordered superlattices has attracted considerable attention since the bottom-up self-organization strategy opens up a robust and universal route for designing novel and multifunctional materials with advanced applications in memory storage devices, catalysis, photonic crystals, and biotherapy. Despite making great efforts in the construction of superlattice materials, there still remains a challenge in the preparation of organic/inorganic hybrid superlattices with tunable dimensions and exotic configurations. Here, we report the spontaneous self-organization of polystyrene-tethered gold nanoparticles (AuNPs@PS) into freestanding organic/inorganic hybrid superlattices templated at the diethylene glycol-air interface.

View Article and Find Full Text PDF

The aim of this work was to synthesize polyurethane foams based on petrochemical polyols and biopolyols with specific apparent densities (40, 60, 80, 100, and 120 kg/m), test their properties, glycolyze them, and finally analyze each glycolyzed product. The petroleum-based foams, used as reference foams, and the bio-based foams underwent a series of standard tests to define their properties (the content of closed cells 20-95%, compressive strength 73-1323 kPa, thermal conductivity 24-42 mW/m∙K, brittleness 4.6-82.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!