Study of the genotoxicity of toluene.

Arch Environ Health

Clinic for Occupational Medicine, First Medical Faculty, Charles University, Prague, Czech Republic.

Published: September 2001

Chromosome analysis was conducted for peripheral lymphocytes of 23 printers exposed to toluene concentrations of 590 mg/m3 in a rotary machine workshop and to rotogravure printing inks. The percentages of aberrant cells were 2.30 in the printers and 1.46 in the control group (n = 22) (p < .05). The concentration of hippuric acid in printers was significantly higher than in the control group (p < .01), and the level of blood toluene at the end of the workshift was 0.500 mg/l. The authors also examined rotogravure printing inks-considered a potential source of genotoxic polycyclic aromatic hydrocarbons because they contained carbon black-their use in printing plants, and previous documentation of increased chromosomal aberrations in rotogravure printers. Only milligrams of fluorene and phenanthrene per gram of the printing inks were found; no polycyclic aromatic hydrocarbons with carcinogenic properties were discovered in the inks. The authors used Salmonella typhimurium indicator strains TA 98, TA 100, TA 1537, and YG 1041 in spot tests and indicator strains TA 98 and TA 100 in plate-incorporation assays to determine that there was no bacterial mutagenicity of all four colors of rotogravure inks. Urinary mutagenicity, which was evaluated with a microsuspension assay containing YG 1041 indicator strain both in the presence and absence of metabolic activation, was also studied. No significant difference in bacterial mutagenicity was found between the exposed and control groups. The increased percentage of aberrant cells in printers can be explained by exposure to genotoxicants that are not excreted in urine. Toluene was the most likely cause of the aberration.

Download full-text PDF

Source
http://dx.doi.org/10.1080/00039890009603417DOI Listing

Publication Analysis

Top Keywords

rotogravure printing
8
printing inks
8
aberrant cells
8
control group
8
polycyclic aromatic
8
aromatic hydrocarbons
8
indicator strains
8
strains 100
8
bacterial mutagenicity
8
printers
5

Similar Publications

Rotogravure printing cylinders are engraved by electro-mechanical engraving (EME) process in India used for printing purpose. But this process has drawbacks of the emissions of hazardous gases, solid and water pollution. EME cylinders are better in cell size, depth and needed higher copper and chrome plating thickness.

View Article and Find Full Text PDF

We determined the toxicity of mixtures of ethyl acetate (EA), isopropyl alcohol (IPA), methyl ethyl ketone (MEK), toluene (TOL) and xylene (XYL) with half-maximal effective concentration (EC) values obtained using human hepatocytes cells. According to these data, quantitative property-activity relationships (QPAR) models were successfully proposed to predict the toxicity of mixtures by multiple linear regressions (MLR). The leave-one-out cross validation method was used to find the best subsets of descriptors in the learning methods.

View Article and Find Full Text PDF

Printing techniques have been extensively used in the fabrication of organic electronic devices, such as light-emitting diodes and display backplanes. These techniques, in particular inkjet printing, are being employed for the localized dispensing of solutions containing biological molecules and cells, leading to the fabrication of bio-functional microarrays and biosensors. Here, we report the fabrication of an all-printed and flexible biosensor for antioxidants.

View Article and Find Full Text PDF

Flexible thin film solar cells are an alternative to both utility-scale and building integrated photovoltaic installations. The fabrication of these devices over electrically conducting low-cost foils requires the deposition of dielectric barrier layers to flatten the substrate surface, provide electrical isolation between the substrate and the device, and avoid the diffusion of metal impurities during the relatively high temperatures required to deposit the rest of the solar cell device layers. The typical roughness of low-cost stainless-steel foils is in the hundred-nanometer range, which is comparable or larger than the thin film layers comprising the device and this may result in electrical shunts that decrease solar cell performance.

View Article and Find Full Text PDF

A pronounced presence of toluene from rotogravure printed matter has been frequently observed indoors. However, its consequences to human health in the life cycle of magazines are poorly known. Therefore, we quantified human-health risks in indoor environments with Risk Assessment (RA) and impacts relative to the total impact of toxic releases occurring in the life cycle of a magazine with Life Cycle Assessment (LCA).

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!