Surface hardness changes induced by O-, Ca- or P-ion implantation into titanium.

Titanium or titanium alloys are very attractive biomedical materials. Biocompatible elements of oxygen, calcium and phosphorus were implanted into titanium and changes of surface hardness were measured using an ultra micro indenter (UMIS-2000). A multiple load-partial unload procedure that can reveal a hardness versus depth profile was adopted. Depth profiles of concentration of implanted ions were obtained by SIMS measurement. For O and P implantation, it is observed that the hardness increases with the increases in the dose. O implantation produced the largest increase in hardness, up to 2.2 times higher than the unimplanted titanium. On the other hand, Ca implantation produced only a small increase in the hardness that was independent of the ion dose. The surface oxide layer of a Ca implanted titanium sample was much thicker than the unimplanted samples or those implanted with O and P ions. The depth of maximum hardness increases with increasing energy of implanted ions. The depths of the maximum hardness occur at indentation depths of one-third to one-eighth of the mean ranges of implanted ions.