The adverse health effects of particulate matter pollution are of increasing concern. In a recent bronchoscopic study in healthy volunteers, pronounced airway inflammation was detected following exposure to diesel exhaust (DE). The present study was conducted in order to evaluate the time kinetics of the inflammatory response following exposure to DE using induced sputum from healthy volunteers. Fifteen healthy nonsmoking volunteers were exposed to DE particles with a 50% cut-off aerodynamic diameter of 10 microm 300 microg x m(-3) and air for 1 h on two separate occasions. Sputum induction with hypertonic saline was performed 6 and 24 h after each exposure. Analyses of sputum differential cell counts and soluble protein concentrations were performed. Six hours after exposure to DE, a significant increase was found in the percentage of sputum neutrophils (37.7 versus 26.2% p=0.002) together with increases in the concentrations of interleukin-6 (12.0 versus 6.3 pg x mL(-1), p=0.006) and methylhistamine (0.11 versus 0.12 microg x L(-1), p=0.024). Irrespective of exposure, a significant increase was found in the percentage of sputum neutrophils at 24 as compared to 6 h, indicating that the procedure of sputum induction itself may change the composition of sputum. This study demonstrates that exposure to diesel exhaust induces inflammatory response in healthy human airways, represented by an early increase in interleukin-6 and methylhistamine concentration and the percentage of neutrophils. Induced sputum provides a safe tool for the investigation of the inflammatory effects of diesel exhaust, but care must be taken when interpreting results from repeated sputum inductions.

Download full-text PDF

Source
http://dx.doi.org/10.1034/j.1399-3003.2000.01512.xDOI Listing

Publication Analysis

Top Keywords

diesel exhaust
16
exposure diesel
12
induced sputum
12
sputum
10
airway inflammation
8
exhaust study
8
time kinetics
8
healthy volunteers
8
inflammatory response
8
sputum induction
8

Similar Publications

In situ remediation of oil-contaminated soils by ozonation: Experimental study and numerical modeling.

Chemosphere

January 2025

Institute of Chemical Engineering Sciences, Foundation for Research and Technology Hellas (FORTH/ICE-HT), 26504, Patras, Greece. Electronic address:

The goal of the present work is to quantify the performance of ozonation as a method for the in situ remediation of soils polluted at varying degree with different types of hydrocarbons, and assess its applicability, in terms of remediation efficiency, cost factors, and environmental impacts. Ozonation tests are conducted on dry soil beds, for three specific cases: sandy soil contaminated with low, moderate and high concentration of a non-aqueous phase liquid (NAPL) consisting of equal concentrations of n-decane, n-dodecane, and n-hexadecane; sandy soil polluted with diesel fuel; oil-drilling cuttings (ODC). The transient changes of the concentration of the total organic carbon (TOC), total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), and soluble chemical oxygen demand (SCOD) in soil and carbon dioxide (CO), carbon monoxide (CO), volatile organic compounds (VOCs), and ozone (O) in exhaust gases are recorded.

View Article and Find Full Text PDF

In recent years, the growing number of vehicles on the road have exacerbated issues related to safety and traffic congestion. However, the advent of the Internet of Vehicles (IoV) holds the potential to transform mobility, enhance traffic management and safety, and create smarter, more interconnected road networks. This paper addresses key road safety concerns, focusing on driver condition detection, vehicle monitoring, and traffic and road management.

View Article and Find Full Text PDF

The safety of power batteries in the automotive industry is of paramount importance and cannot be emphasized enough. As lithium-ion battery technology continues to evolve, the energy density of these batteries increases, thereby amplifying the potential risks linked to battery failures. This study explores pivotal safety challenges within the electric vehicle sector, with a particular focus on thermal runaway and gas emissions originating from lithium-ion batteries.

View Article and Find Full Text PDF

Particulate matter (PM), particularly fine (PM) and ultrafine (PM) particles, originates from both natural and anthropogenic sources, such as biomass burning and vehicle emissions. These particles contain harmful compounds that pose significant health risks. Upon inhalation, ingestion, or dermal contact, PM can penetrate biological systems, inducing oxidative stress, inflammation, and DNA damage, which contribute to a range of health complications.

View Article and Find Full Text PDF

Ascertaining the Environmental Advantages of Pavement Designs Incorporating Recycled Content through a Parametric and Probabilistic Approach.

Environ Sci Technol

January 2025

College of Environmental Science and Engineering, Nankai University, 38 Tongyan Road, Jinnan District, 300350 Tianjin, China.

Reclaimed asphalt pavement (RAP) is a widely used end-of-life (EoL) material in asphalt pavements to increase the material circularity. However, the performance loss due to using RAP in the asphalt binder layer often requires a thicker layer, leading to additional material usage, energy consumption, and transportation effort. In this study, we developed a parametric and probabilistic life cycle assessment (LCA) framework to robustly compare various pavement designs incorporating recycled materials.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!