An oscillator pore is identified that generates intermittent, large amplitude, ionic current in the plasma membrane. The pore is thought to be composed of 10-12 units of subunit c of ATP synthase. Pore opening and closing is a co-operative process, dependent on the release, or binding, of as many as six calcium ions. This mechanism suggests a more general method of co-operative threshold detection of chemical agents via protein modification, the output being directly amplified in a circuit. Here the authors describe steps in the development of a sensor of chemical agents. The subunit c pore in a lipid bilayer spans a nanometer-scale hole in a silicon nitride barrier. Either side of the barrier are electrolyte solutions and current through the pore is amplified by circuitry. The techniques of laser ablation, electron beam lithography and ion beam milling are used to make successively smaller holes to carry the lipid patch. Holes of diameter as small as 20 nm are engineered in a silicon nitride barrier and protein activity in lipid membranes spanning holes as small as 30 nm in diameter is measured. The signal-to-noise ratio of the ionic current is improved by various measures that reduce the effective capacitance of the barrier. Some limits to scale reduction are discussed.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/BF02344699 | DOI Listing |
We experimentally demonstrate what we believe to be a novel RF interference mitigation technique using a network of low-loss silicon nitride ring resonators. The rings are used for complex (phase and amplitude) line-by-line shaping of higher-order sidebands from an electro-optic modulator to discriminate large and small RF signal input, thereby achieving strong (30 dB) mitigation of a large signal and virtually no mitigation for small signals.
View Article and Find Full Text PDFIn this paper, we quantitatively compare the autofluorescence of stoichiometric low pressure chemical vapor deposition (LPCVD) silicon nitride and sputtered tantalum pentoxide waveguides at a pump wavelength of 532 nm. Through a direct quantitative characterization of comparable waveguides formed from the two films, we find no observable autofluorescence for tantalum pentoxide waveguides. Our experimental sensitivity is limited by Raman scattering of the pump into our detection band and our measurements indicate that the autofluorescence of the tantalum pentoxide waveguides is more than 600 × smaller than that of silicon nitride waveguides.
View Article and Find Full Text PDFSilicon nitride (SiN) integrated photonics is a highly promising platform for photonic quantum information processing. However, the efficient generation of single photons remains a significant challenge. Epitaxial InAs/GaAs quantum dots (QDs) embedded in wavelength-scale nanocavities offer a promising solution as single-photon sources (SPSs), but their integration with SiN has not yet been demonstrated.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Division of Micro and Nanosystems (MST), School of Electrical Engineering and Computer Science (EECS), KTH Royal Institute of Technology, Stockholm SE-10044, Sweden.
Controlled breakdown has emerged as an effective method for fabricating solid-state nanopores in thin suspended dielectric membranes for various biomolecular sensing applications. On an unpatterned membrane, the site of nanopore formation by controlled breakdown is random. Nanopore formation on a specific site on the membrane has previously been realized using local thinning of the membrane by lithographic processes or laser-assisted photothermal etching under immersion in an aqueous salt solution.
View Article and Find Full Text PDFInd Eng Chem Res
January 2025
Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, D-45470 Mülheim an der Ruhr, Germany.
This work presents the scale-up of room-temperature mechanochemical synthesis of nanocorundum (high-surface-area α-AlO) from boehmite (γ-AlOOH). This transformation on the 1 g scale using a laboratory shaker mill had previously been reported. High-energy Simoloyer ball mills equipped with milling chambers of sizes ranging from 1 to 20 L were used to scale up the mechanochemical nanocorundum synthesis to the 50 g to 1 kg scale, which paves the way to further increase batch size.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!