A liquid chromatographic method with evaporative mass detection (EMD) is described for the determination of paraffins in food contact materials that do not contain polyolefin oligomers, or paraffins migrating from these materials into fatty food simulants or certain simple foods. A normal-phase column operating at maximum column efficiency separates nonparaffinic and paraffinic materials without resolving the latter into individual components, and EMD is used to quantitate the paraffins. An on-line qualitative method that uses liquid chromatography/gas chromatography with flame ionization detection discriminates between paraffin waxes and oils in food contact materials, food simulants, and certain simple foods; a Fourier transform infrared spectrophotometric qualitative method also discriminates between waxes and oils, but is usually restricted to food contact materials that do not contain polyolefins and to migration experiments with organic solvents as fatty food simulants (with some other fatty food simulants, paraffin type must then be identified in the food contact material).

Download full-text PDF

Source

Publication Analysis

Top Keywords

food simulants
20
food contact
16
contact materials
12
fatty food
12
food
9
determination paraffins
8
paraffins food
8
evaporative mass
8
mass detection
8
paraffin type
8

Similar Publications

Comparative Study of Crucial Properties of Packaging Based on Polylactide and Selected Essential Oils.

Foods

January 2025

Department of Chemical Organic Technology and Polymeric Materials, Faculty of Chemical Technology and Engineering, West Pomeranian University of Technology, Pułaskiego 10, 70-322 Szczecin, Poland.

In order to establish the differences in packaging containing various essential oils, polylactide (PLA)-based polymeric films incorporating poly(ethylene glycol) (PEG), clove (C), grapefruit (G), rosemary (R), and tea tree (T) essential oils were obtained and subsequently analyzed. In addition to examining structure and morphology, the polymer films underwent analyses that are particularly important with regard to contact with food. Mechanical and antioxidant properties, water vapor transmission rate (WVTR), and analysis of barrier properties against ultraviolet (UV) radiation, as well as the migration of ingredients into food simulants such as 10% / solutions of ethanol, 3% / acetic acid solution, and isooctane, were among the critical studies conducted.

View Article and Find Full Text PDF

Recently, interest in eco-friendly techniques for producing antibacterial food packaging films has surged. Within this context, plasma polymerization is emerging as a promising approach for applying degradable antibacterial coatings on various plastic films. This research therefore employs an atmospheric pressure aerosol-assisted plasma deposition technique to create polyethylene glycol (PEG)-like coatings embedding zinc oxide nanoparticles (ZnO NPs) of varying sizes on polyethylene (PE) substrates.

View Article and Find Full Text PDF

The reaction mechanisms of ethylene oxide and propylene oxide with food Simulants: Based on experiments and computational analysis.

Food Res Int

February 2025

College of Food Science and Technology, Shanghai Ocean University, Shanghai 201306, China; Engineering Research Center of Food Thermal-Processing Technology, Shanghai Ocean University, Shanghai 201306, China. Electronic address:

Ethylene oxide (EO) and propylene oxide (PO) are widely used as sterilizing agents in the food industry. However, their residues in food packaging can migrate into food and react with it, affecting the accuracy of residue detection in food. This study aims to explore the reaction mechanisms between EO and PO and aqueous food simulants using both experimental and computational methods.

View Article and Find Full Text PDF

In this study, a pyrolysis-gas chromatography/mass spectrometry method was established to quantify microplastics (MPs) released from plastic food containers during rinsing and migration. The inner surface of actual samples was rinsed with deionized water, and the MPs in rinse water were collected through a glass fiber membrane with pore size of 1 μm. Subsequently, thoroughly cleaned polypropylene (PP) food packaging containers were selected for migration tests under different simulants, migration temperatures, and migration times.

View Article and Find Full Text PDF

Multilayer laminated films are widely used as food packaging materials. The substances contained in these films have the potential to migrate into food in contact, but the actual situation is unknown. In this study, we first determined the contents of 24 elements in 42 food laminate bags by ICP-OES and ICP-MS.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!