This paper describes the development and characterization of ceramic-based multisite arrays for electrochemical recordings in biological systems. These electrodes represent a parallel technology to the design of microelectrodes using silicon substrates. The ceramic substrates are stronger than silicon and are nonconducting, which makes them better suited for in vivo electrochemical measurements. The current designs are based on formation of four-site (50 x 50 microns with 200 microns spacing) electrodes on ceramic wafers using photolithography. The recording sites and connecting lines are made of Pt with a polyimide coating to insulate the connecting lines. The resulting electrodes are cut from the wafers producing a 1 cm length microelectrode that tapers to a approximately 2-5 microns tip. Electrochemical measures of dopamine and hydrogen peroxide support that the sensitivity, selectivity, and response characteristics of the electrodes exceed those of previously published silicon substrate-based microelectrodes. This is the first demonstration of microarrays formed from ceramic substrates, and the data presented support the hypothesis that these microelectrodes may be useful for a variety of neurochemical and electrophysiological applications. Preliminary in vivo electrochemical recordings are presented.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/ac9907991 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Enhanced Electrochemical Performance of Polyaniline-Boron Doped Diamond Electrode for Supercapacitor Applications.
Small Methods
January 2025
Institute of Physics, Czech Academy of Sciences, Cukrovarnická 10, Prague 6, 162 00, Czech Republic.
Understanding how to tune the properties of electroactive materials is a key parameter for their applications in energy storage systems. This work presents a comprehensive study in tailoring polyaniline (PANI) suspensions by acid-assisted polymerization method and their subsequent deposition on boron-doped diamond (BDD) supports with low/high B concentrations. The porous or densely packed morphology of PANI is successfully controlled by varying the monomer-to-initiator ratio.
View Article and Find Full Text PDFQuantification of L-lactic acid in human plasma samples using Ni-based electrodes and machine learning approach.
Talanta
December 2024
NanoBiosensors and Biodevices Lab, School of Medical Science and Technology, Indian Institute of Technology Kharagpur, West Bengal, 721302, India. Electronic address:
This work presents a robust strategy for quantifying overlapping electrochemical signatures originating from complex mixtures and real human plasma samples using nickel-based electrochemical sensors and machine learning (ML). This strategy enables the detection of a panel of analytes without being limited by the selectivity of the transducer material and leaving accommodation of interference analysis to ML models. Here, we fabricated a non-enzymatic electrochemical sensor for L-lactic acid detection in complex mixtures and human plasma samples using nickel oxide (NiO) nanoparticle-modified glassy carbon electrodes (GCE).
View Article and Find Full Text PDFElectrochemical Biosensing Technologies for Neurochemicals: Recent Advances in Electrochemical Sensors and Devices.
ACS Sens
January 2025
State Key Laboratory of Heavy Oil Processing, College of New Energy and Materials, China University of Petroleum (Beijing), Beijing 102249, China.
Article Synopsis
- Electrochemical sensing is essential for real-time monitoring of neurotransmitters and neuromodulators, helping to understand various physiological and psychological processes in the central nervous system.
- Advanced biosensor technologies like voltammetry, amperometry, potentiometry, FET, and OECT are highlighted for their key roles in improving the detection capabilities from single cells to whole brains.
- The review also discusses the strengths and weaknesses of these techniques while addressing current challenges and future directions for enhancing electrochemical biosensing methods.
Integrated use of electrochemical anaerobic reactors and genomic based modeling for characterizing methanogenic activity in microbial communities exposed to BTEX contamination.
Environ Res
December 2024
Newe Ya'ar Research Center, Agricultural Research Organization, P.O. Box 1021, Ramat Yishay 30095, Israel. Electronic address:
In soil polluted with benzene, toluene, ethylbenzene, and xylenes (BTEX), oxygen is rapidly depleted by aerobic respiration, creating a redox gradient across the plume. Under anaerobic conditions, BTEX biodegradation is then coupled with fermentation and methanogenesis. This study aimed to characterize this multi-step process, focusing on the interactions and functional roles of key microbial groups involved.
View Article and Find Full Text PDFConfining Liquid Electrolytes in a Nitrogen-Rich Nanoporous Carbon Sponge for Superior Lithium-Ion Conduction.
ACS Appl Mater Interfaces
January 2025
State Key Laboratory of Materials-Oriented Chemical Engineering and College of Chemistry and Molecular Engineering, Nanjing Tech University, Nanjing 211816, P. R. China.
Solid-state Li-ion batteries are recognized as highly promising energy storage devices due to their ability to overcome issues related to the inferior cycle life and potential risks of traditional liquid Li-ion batteries. However, developing solid-state electrolytes with fast Li-ion conductivity continues to be a major challenge. In this study, we present a family of quasi-solid-state electrolytes (QSSEs) synthesized by confining liquid electrolytes within a N-rich porous carbon sponge, exhibiting superior Li-ion conduction for solid-state battery applications.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!