Airborne contamination with bacteria-carrying particles (cfu/m3) and their sedimentation rate (cfu/m2/h) was compared in an operating room (OR) equipped with two turbulent ventilation systems. One was a thermally based system with inlet of cool clean air at the floor level and evacuation of the air at the ceiling by convection (17 air changes/h). The other was a conventional plenum pressure system with air supply at the ceiling and evacuation at the floor level (16 air changes/h). The study was made during rigidly standardised sham operations (N = 20) performed in the same OR by the same six member team wearing non-woven disposable or cotton clothing. Airborne contamination in the wound and instrument areas was related to the surface contamination rate in the same areas and in addition, on the patient chest and in the periphery of the OR. With the exception of the periphery of the OR, the surface and air contamination rates were highly correlated in both ventilation systems (P = 0.02-0.0006, r2 = 0.52-0.79). This was also true particularly when disposable clothing was used while the correlation was weaker in cotton clothing experiments. An equation describing the relation between surface and air counts is given. Typically, the surface counts were numerically 16-fold the air counts, i.e., the number of colonies sedimenting on four 14 cm-diameter agar plates during 1 h will almost equal the number of airborne cfu per m3. We propose, that sedimentation plates represent not only a technically easier method than air sampling but when correctly used, are also the most realistic indicator of airborne bacterial OR contamination in areas critical for surgery.

Download full-text PDF

Source
http://dx.doi.org/10.1053/jhin.1998.0542DOI Listing

Publication Analysis

Top Keywords

surface air
12
air counts
12
air
10
turbulent ventilation
8
airborne contamination
8
ventilation systems
8
floor level
8
air changes/h
8
cotton clothing
8
contamination
5

Similar Publications

Atomic-Level Tin Regulation for High-Performance Zinc-Air Batteries.

J Am Chem Soc

January 2025

Beijing Key Laboratory of Green Chemical Reaction Engineering and Technology, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.

The trade-off between the performances of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) presents a challenge in designing high-performance aqueous rechargeable zinc-air batteries (a-r-ZABs) due to sluggish kinetics and differing reaction requirements. Accurate control of the atomic and electronic structures is crucial for the rational design of efficient bifunctional oxygen electrocatalysts. Herein, we designed a Sn-Co/RuO trimetallic oxide utilizing dual-active sites and tin (Sn) regulation strategy by dispersing Co (for ORR) and auxiliary Sn into the near-surface and surface of RuO (for OER) to enhance both ORR and OER performances.

View Article and Find Full Text PDF

In this paper, we present a new computational framework for the simulation of airway resistance, the fraction of exhaled nitric oxide, and the diffusion capacity for nitric oxide in healthy and unhealthy lungs. Our approach is firstly based on a realistic representation of the geometry of healthy lungs as a function of body mass, which compares well with data from the literature, particularly in terms of lung volume and alveolar surface area. The original way in which this geometry is created, including an individual definition of the airways in the first seven generations of the lungs, makes it possible to consider the heterogeneous nature of the lungs in terms of perfusion and ventilation.

View Article and Find Full Text PDF
Article Synopsis
  • The study investigates the temperature sensitivity of runways in permafrost regions and proposes a parallel perforated ventilation subgrade to improve cooling.
  • The finite element model used was validated against previous research, demonstrating the cooling effectiveness of the new subgrade design.
  • Results indicate significant cooling effects on pavement temperatures over time, while air velocity and working time primarily impact the crushed rock layer and subgrade temperature rather than the surface layer.
View Article and Find Full Text PDF

Excitons, bound electron-hole pairs, influence the optical properties in strongly interacting solid-state systems and are typically most stable and pronounced in monolayer materials. Bulk systems with large exciton binding energies, on the other hand, are rare and the mechanisms driving their stability are still relatively unexplored. Here, we report an exceptionally large exciton binding energy in single crystals of the bulk van der Waals antiferromagnet CrSBr.

View Article and Find Full Text PDF

Cost-Effective Synthesis of Carbazole-Based Nanoporous Organic Polymers for SO Capture.

ACS Appl Mater Interfaces

January 2025

International Scientific and Technological Cooperation Base of Industrial Solid Waste Cyclic Utilization and Advanced Materials, School of Materials Science and Engineering, North Minzu University, Yinchuan 750021, China.

Sulfur dioxide (SO), a pervasive air pollutant, poses significant environmental and health risks, necessitating advanced materials for its efficient capture. Nanoporous organic polymers (NOPs) have emerged as promising candidates; however, their development is often hindered by high synthesis temperatures, complex precursors, and limited SO selectivity. Herein, we report a room-temperature, cost-effective synthesis of carbazole-based nanoporous organic polymers (CNOPs) using 1,3,5-trioxane and paraldehyde, offering a significant advancement over traditional Friedel-Crafts alkylation methods.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!