Axisymmetric drop shape analysis by profile (ADSA-P) was used to assess in time contact angle changes of human plasma drops placed on four different biomaterials. Results were related with conventional blood compatibility measurements: albumin adsorption, fibrinogen adsorption and platelet adhesion. While contact angle measurements with water are material-related but constant in time, contact angle measurements with plasma changed over time owing to protein adsorption on the solid-liquid interface. The contact medium plasma did not influence the initial contact angle. Contact angles on PDMS decreased most in time (41 degrees) and demonstrated highest levels of conventionally measured albumin and fibrinogen adsorption and platelet adhesion. PTFE, with the lowest contact angle decrease over a 500 minutes period (19 degrees), showed low fibrinogen and albumin adsorption as well as low platelet adhesion. PU and HDPE demonstrated almost similar initial contact angles with plasma and contact angle decreases (26 and 27 degrees), intermediate protein adsorption, and platelet adhesion. We conclude that biocompatibility properties of the tested materials may be more related to the behaviour of their contact angles in time, than to the initial hydrophobic or hydrophilic state.
Download full-text PDF |
Source |
|---|
Publication Analysis
Top Keywords
Similar Publications
A three-dimensional kinematic analysis of bipedal walking in a white-handed gibbon (Hylobates lar) on a horizontal pole and flat surface.
Primates
January 2025
Laboratory of Biological Anthropology, Graduate School of Human Sciences, Osaka University, Suita, Osaka, Japan.
Gibbons, a type of lesser ape, are brachiators but also walk bipedally and without forelimb assistance, not only on the ground but also on tree branches. The arboreal bipedal walking strategy of the gibbons has been studied in previous studies in relation to two-dimensional (2D) kinematic analysis. However, because tree branches and the ground differ greatly in width, leading to a constrained foot contact point on the tree branches, gibbons must adjust their 3D joint motions of trunk and hindlimb on the tree branches.
View Article and Find Full Text PDFThe effects of anodization and instrumentation on titanium abutment surface characteristics and biofilm formation.
J Prosthodont
January 2025
Department of Prosthodontics, Indiana University School of Dentistry, Indianapolis, Indiana, USA.
Purpose: To assess the impact of anodization and instrumentation on titanium abutment surface characteristics (surface roughness and wettability) and biofilm formation (viability and mass).
Materials And Methods: Titanium discs were obtained from pre-milled abutment blanks made of titanium-6aluminum-7niobium alloy. Polished samples were divided into three groups: un-anodized, gold-anodized, and pink-anodized.
Towards cell-adhesive, 4D printable PCL networks through dynamic covalent chemistry.
J Mater Chem B
January 2025
Department of Textile and Fibre Engineering, Indian Institute of Technology Delhi, Hauz Khas, New Delhi-110016, India.
In recent years, the development of biodegradable, cell-adhesive polymeric implants and minimally invasive surgery has significantly advanced healthcare. These materials exhibit multifunctional properties like self-healing, shape-memory, and cell adhesion, which can be achieved through novel chemical approaches. Engineering of such materials and their scalability using a classical polymer network without complex chemical synthesis and modification has been a great challenge, which potentially can be resolved using biobased dynamic covalent chemistry (DCC).
View Article and Find Full Text PDFEffect of Postoperative Neck-Shaft and Anteversion Angles on Biomechanical Outcomes in Proximal Femoral Osteotomy: An In Silico Study.
J Orthop Res
January 2025
Australian Centre for Precision Health and Technology (PRECISE), Griffith University, Gold Coast, Australia.
Effective surgical planning is crucial for maximizing patient outcomes following complex orthopedic procedures such as proximal femoral osteotomy. In silico simulations can be used to assess how surgical variations in proximal femur geometry, such as femur neck-shaft and anteversion angles, affect postoperative system mechanics. This study investigated the sensitivity of femur mechanics to postoperative neck-shaft angles, anteversion angles, and osteotomy contact areas using patient-specific finite element analysis informed by neuromusculoskeletal models.
View Article and Find Full Text PDFA Wide-Spectrum Oil/Water Separation Scenario Enhanced by a Chitosan-Based Superwetting Membrane with a Tunable Microstructure and Powerful Photocatalytic Self-Cleaning Capability.
Langmuir
January 2025
State Key Laboratory of Heavy Oil Processing, College of Chemistry and Chemical Engineering, China University of Petroleum (East China), Qingdao 266580, China.
Oil spills and industrial oily wastewater pose serious threats to the environment. A series of modified membranes with special wettability have been widely used for separating oil/water mixtures and emulsions. However, these membranes still face challenges such as the detachment of the modified coatings and membrane fouling.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!