Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1103/physrevb.45.4390 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Tunable TiZrMoC Coatings: A Comprehensive Study of Microstructure, Mechanical Properties, and Wear Resistance.
Nanomaterials (Basel)
December 2024
School of Power & Mechanical Engineering, Wuhan University, Wuhan 430072, China.
TiZrMoC coatings were deposited on Si(100) substrates using a DC dual magnetron sputtering. The composition was controlled by adjusting the sputtering parameters of the TiZrMo and graphite targets. The influence of graphite target current on the resulting coating properties was explored.
View Article and Find Full Text PDFPhotothermal Assisted Biomass Oxidation for Pairing Carbon Dioxide Electroreduction with Low Cell Potential.
ChemSusChem
August 2024
College of Materials Science and Engineering, Hunan University, 410082, China.
Integrating anodic biomass valorization with carbon dioxide electroreduction (CORR) can produce value-added chemicals on both the cathode and anode; however, anodic oxidation still suffers from high overpotential. Herein, a photothermal-assisted method was developed to reduce the potential of 5-hydroxymethyl furfural (HMF) electrooxidation. Capitalizing on the copious oxygen vacancies, defective CoO (D-CoO) exhibited a stronger photothermal effect, delivering a local temperature of 175.
View Article and Find Full Text PDFStructural and mechanical properties of Si-doped CrN coatings deposited by magnetron sputtering technique.
Heliyon
February 2023
Department of Chemical Engineering, Federal University Wukari, Taraba State, Nigeria.
This study successfully deposited Si-doped CrN coatings onto Si (100) substrate by direct current magnetron sputtering. The concentration of Si in the CrSiN coatings was varied by changing the Si target current during deposition. The microstructural and mechanical properties were determined by employing X-ray diffraction, X-ray photoelectron spectroscopy, atomic force microscopy, and nanoindentation test.
View Article and Find Full Text PDFEvaluation of silica and PMMA optical fibre response when irradiated with 16.5 MeV protons.
Phys Med
September 2019
School of Physical Sciences and Institute for Photonics and Advanced Sensing, University of Adelaide, Australia; Cancer Research Institute and the School of Health Sciences, University of South Australia, Adelaide, Australia.
An investigation into the response of optical fibres to 16.5 MeV protons is presented here. A silica and a poly(methyl methacrylate) (PMMA) optical fibre was exposed to 16.
View Article and Find Full Text PDFMultilayered TiAlN films on Ti6Al4V alloy for biomedical applications by closed field unbalanced magnetron sputter ion plating process.
Mater Sci Eng C Mater Biol Appl
February 2016
State Key Laboratory of Mechanical System and Vibration, Shanghai Jiao Tong University, Shanghai 200240, P.R. China.
Ti6Al4V alloy has been widely used as a suitable material for surgical implants such as artificial hip joints. In this study, a series of multilayered gradient TiAlN coatings were deposited on Ti6Al4V substrate using closed field unbalanced magnetron sputter ion plating (CFUBMSIP) process. Taguchi design of experiment approach was used to reveal the influence of depositing parameters to the film composition and performance of TiAlN coatings.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!