Studies on the Virucidal Effects of UV-C of 233 nm and 275 nm Wavelengths.

Among the physical decontamination methods, treatment with ultraviolet (UV) radiation is a suitable means of preventing viral infections. Mercury vapor lamps (254 nm) used for room decontamination are potentially damaging to human skin (radiation) and harmful to the environment (mercury). Therefore, other UV-C wavelengths (100-280 nm) may be effective for virus inactivation on skin without damaging it, e.

No detrimental effect on the hand microbiome of health care staff by frequent alcohol-based antisepsis.

Background: The importance of ethanol-based hand rubs (EBHRs) to prevent health care-associated infections is undisputed. However, there is a lack of meaningful data regarding the influence of EBHRs on skin microbiome.

Methods: Four nurses in a neonatal intensive care unit were included.

Efficacy of 233 nm LED far UV-C-radiation against clinically relevant bacterial strains in the phase 2/ step 2 in vitro test on basis of EN 14561 and on an epidermis cell model.

Introduction: Healthcare-acquired infections and overuse of antibiotics are a common problem. Rising emergence of antibiotic and antiseptic resistances requires new methods of microbial decontamination or decolonization as the use of far-UV-C radiation.

Methods: The microbicidal efficacy of UV-C radiation (222 nm, 233 nm, 254 nm) was determined in a quantitative carrier test and on 3D-epidermis models against Staphylococcus (S.

Irradiation of human oral mucosa by 233 nm far UV-C LEDs for the safe inactivation of nosocomial pathogens.

The inactivation of multi resistant pathogens is an important clinical need. One approach is UV-C irradiation, which was previously not possible in vivo due to cytotoxicity. Recently, far UV-C irradiation at λ < 240 nm was successfully used on skin with negligible damage.

Suitable Disinfectants with Proven Efficacy for Genetically Modified Viruses and Viral Vectors.

Viral disinfection is important for medical facilities, the food industry, and the veterinary field, especially in terms of controlling virus outbreaks. Therefore, standardized methods and activity levels are available for these areas. Usually, disinfectants used in these areas are characterized by their activity against test organisms (i.

Skin optical properties from 200 to 300 nm support far UV-C skin-safety in vivo.

The growing threat of multi-drug resistant pathogens and airborne microbial diseases has highlighted the need to improve or develop novel disinfection methods for clinical environments. Conventional ultraviolet C (UV-C) lamps effectively inactivate microorganisms but are harmful to human skin and eyes upon exposure. The use of new 233 nm far UV-C LEDs as an antiseptic can overcome those limitations.

A 3D Model of Human Buccal Mucosa for Compatibility Testing of Mouth Rinsing Solutions.

Oral mucositis is the most common and severe non-hematological complication associated with cancer radiotherapy, chemotherapy, or their combination. Treatment of oral mucositis focuses on pain management and the use of natural anti-inflammatory, sometimes weakly antiseptic mouth rinses in combination with optimal oral cavity hygiene. To prevent negative effects of rinsing, accurate testing of oral care products is necessary.

Antiseptic efficacy of two mouth rinses in the oral cavity to identify a suitable rinsing solution in radiation- or chemotherapy induced mucositis.

Objectives: Oral mucositis caused by intensive cancer chemotherapy or radiotherapy frequently results in pronounced damage of the oral mucosa leading to painful oral hygiene. To support oral care, antimicrobial effective mouth rinses may be used. Thus, the efficacy of a hypochlorite-based mouth rinse (Granudacyn®), assumed to be highly biocompatible because of the compounds being part of the natural pathogen defense, as possible antiseptic agent in case of oral mucositis was compared to that of an octenidine based antiseptic mouth rinse (Octenidol® md).

Ethanol is indispensable for virucidal hand antisepsis and without toxic risks in daily use.

The approval of ethanol by the Biocidal Products Regulation has been under evaluation since 2007 due to controversial opinions on the risk assessment. Because of this critical situation, 2022 a memorandum was published to verify whether the use of ethanol for hand antisepsis poses any hazard. On the basis of the memorandum a toxicological evaluation of ethanol-based hand rubs is given.

Advanced Skin Antisepsis: Application of UVA-Cleavable Hydroxyethyl Starch Nanocapsules for Improved Eradication of Hair Follicle-Associated Microorganisms.

Hair follicles constitute important drug delivery targets for skin antisepsis since they contain ≈25% of the skin microbiome. Nanoparticles are known to penetrate deeply into hair follicles. By massaging the skin, the follicular penetration process is enhanced based on a ratchet effect.

An interactive feedback system for increasing hand antisepsis adherence in stationary intensive care.

Background: Pathogens causing infections are in many cases transmitted via the hands of personnel. Thus, hand antisepsis has strong epidemiological evidence of infection prevention. Depending on various factors, hand antisepsis adherence ranges between 9.

Recommendation of the German Society of Hospital Hygiene (DGKH): Prevention of COVID-19 by virucidal gargling and virucidal nasal spray - updated version April 2022.

The German Society of Hospital Hygiene develops guidelines, recommendations and standard operation procedures on a voluntary basis, published on the DGKH-website (https://www.krankenhaushygiene.de/).

Application of 233 nm far-UVC LEDs for eradication of MRSA and MSSA and risk assessment on skin models.

A newly developed UVC LED source with an emission wavelength of 233 nm was proved on bactericidal efficacy and skin tolerability. The bactericidal efficacy was qualitatively analysed using blood agar test. Subsequently, quantitative analyses were performed on germ carrier tests using the MRSA strain DSM11822, the MSSA strain DSM799, S.

In vitro response of THP-1 derived macrophages to antimicrobially effective PHMB-coated Ti6Al4V alloy implant material with and without contamination with S. epidermidis and P. aeruginosa.

Aim: Periprosthetic joint infections are a devastating complication after arthroplasty, leading to rejection of the prosthesis. The prevention of septic loosening may be possible by an antimicrobial coating of the implant surface. Poly (hexamethylene) biguanide hydrochloride [PHMB] seems to be a suitable antiseptic agent for this purpose since previous studies revealed a low cytotoxicity and a long-lasting microbicidal effect of Ti6Al4V alloy coated with PHMB.

Skin tolerant inactivation of multiresistant pathogens using far-UVC LEDs.

Multiresistant pathogens such as methicillin-resistant Staphylococcus aureus (MRSA) cause serious postoperative infections. A skin tolerant far-UVC (< 240 nm) irradiation system for their inactivation is presented here. It uses UVC LEDs in combination with a spectral filter and provides a peak wavelength of 233 nm, with a full width at half maximum of 12 nm, and an irradiance of 44 µW/cm.

Extensively-drug-resistant Klebsiella pneumoniae ST307 outbreak strain from north-eastern Germany does not show increased tolerance to quaternary ammonium compounds and chlorhexidine.

Background: An outbreak of extensively-drug-resistant Klebsiella pneumoniae strain ST307 in a cluster of hospitals in north-east Germany gave rise to the assumption that the epidemiological success of the strain could be based on increased tolerance to biocides.

Methods: The tolerance of the outbreak strain was compared with epidemiologically unrelated clinical isolates of K. pneumoniae, and reference strains of Pseudomonas aeruginosa (ATCC 15442) and Escherichia coli K12 (NCTC 10538).

Release of the model drug SR101 from polyurethane nanocapsules in porcine hair follicles triggered by LED-derived low dose UVA light.

Hair follicles (HFs) are important drug delivery targets for the therapy of miscellaneous skin diseases and for skin antisepsis. Furthermore, HFs significantly contribute to drug delivery of topically applied substances. Nanoparticulate systems are excellently suited for follicular drug delivery as they entail the opportunity of directed drug transport into HFs.

In vitro evaluation of contact-active antibacterial efficacy of Ti-Al-V alloys coated with the antimicrobial agent PHMB.

Immobilized polycationic substances on biomaterial surfaces kill adhering bacteria upon contact and are considered a promising non-antibiotic alternative. Unfortunately, there is no generally accepted in vitro method for quantitatively evaluating the antibacterial efficacy of contact-active non-leachable antimicrobial surfaces. Moreover, guidelines of generally accepted international industrial standards do not reflect the basic principle of bacterial contamination and/or are performed in the presence of a solid covering material.

Poly (hexamethylene biguanide), adsorbed onto Ti-Al-V alloys, kills slime-producing Staphylococci and Pseudomonas aeruginosa without inhibiting SaOs-2 cell differentiation.

Antimicrobial coating of implant material with poly(hexamethylene biguanide) hydrochloride (PHMB) may be an eligible method for preventing implant-associated infections. In the present study, an antibacterial effective amount of PHMB is adsorbed on the surface of titanium alloy after simple chemical pretreatment. Either oxidation with 5% H O for 24 hr or processing for 2 hr in 5 M NaOH provides the base for the subsequent formation of a relatively stable self-assembled PHMB layer.

Computational prediction of immune cell cytotoxicity.

Immunotoxicity, defined as adverse effects of xenobiotics on the immune system, is gaining increasing attention in the approval process of industrial chemicals and drugs. In-vivo and ex-vivo experiments have been the gold standard in immunotoxicity assessment so far, so the development of in-vitro and in-silico alternatives is an important issue. In this paper we describe a widely applicable, easy-to use computational approach which can serve as an initial immunotoxicity screen of new chemical entities.

Mitochondrial functions of THP-1 monocytes following the exposure to selected natural compounds.

The immune system is an important target of various xenobiotics, which may lead to severe adverse effects including immunosuppression or inappropriate immunostimulation. Mitochondrial toxicity is one possibility by which xenobiotics exert their toxic effects in cells or organs. In this study, we investigated the impact of three natural compounds, cyclosporine A (CsA), deoxynivalenol (DON) and cannabidiol (CBD) on mitochondrial functions in the THP-1 monocytic cell line.

Differential effects of Helenalin, an anti-inflammatory sesquiterpene lactone, on the proteome, metabolome and the oxidative stress response in several immune cell types.

Extracts of Arnica spp. are traditionally used due to their anti-inflammatory effects for the topical treatment of e.g.

A proteomic approach for the identification of immunotoxic properties of Tulipalin A.

The immune system is permanently exposed to several environmental influences that can have adverse effects on immune cells or organs leading to immunosuppression or inappropriate immunostimulation, called direct immunotoxicity. The natural compound Tulipalin A (TUPA), a lactone with α-methylene-γ-butyrolactone moiety, can influence the immune system and lead to allergic contact dermatitis. This in vitro study focused on effects of TUPA using two immune cell lines (Jurkat T cells and THP-1 monocytes).

The combined composite resin and amalgam restoration for posterior teeth: a clinical report.

This paper presents a technique for restoring maxillary posterior teeth with a combined composite resin and amalgam restoration when the preparation extends buccally into an esthetically critical area. This technique has two major advantages over traditional combined restorations: it requires only one clinical appointment, and it provides an esthetically acceptable result while maintaining the advantages of an amalgam restoration. A clinical assessment of 12 of these restorations, in vivo for 0.