Publications by authors named "Zorina M"

The paper considers the possibility of using the diamond-silicon carbide composite Skeleton with a technological coating of polycrystalline silicon as a substrate for X-ray mirrors used with powerful synchrotron radiation sources (third+ and fourth generation). Samples were studied after polishing to provide the following surface parameters: root-mean-square flatness ≃ 50 nm, micro-roughness on the frame 2 µm × 2 µm σ ≃ 0.15 nm.

View Article and Find Full Text PDF

The possibility of cyanoacetohydrazide usage as a novel derivatizing agent is demonstrated in the presented article, and a comparison with hydroxylamine as the most commonly used reagent is provided. Optimal conditions for steroid derivatization with cyanoacetohydrazide are provided. According to the collected data, the maximum yield of derivatives was observed at pH 2.

View Article and Find Full Text PDF

Zirconium (Zr) alloys are utilized as structural components for the cores of nuclear reactors due to the excellent combination of their mechanical properties and corrosion resistance under intense neutron irradiation conditions in water. The characteristics of microstructures formed during heat treatments play a crucial role in obtaining the operational performance of parts made from Zr alloys. This study investigates the morphological features of (α + β)-microstructures in the Zr-2.

View Article and Find Full Text PDF

Dopamine, adrenaline and octopamine are small polar molecules that play a vital role in regulatory systems. In this paper, phthalylglycyl chloride was proposed as a derivatization agent for octopamine, adrenaline and dopamine determination in urine for the first time. The derivatization procedure facilitated the use of reversed-phase liquid chromatography with positive electrospray ionization-high-resolution mass spectrometry.

View Article and Find Full Text PDF

Crystallographic relationships between α- and β-phases resulting from phase transformations, which took place during the continuous water quenching (WQ), air cooling (AC) and furnace cooling (FC) of a Ti6Al4V plates solution treated at 1065 °C, were investigated by methods of electron backscatter diffraction (EBSD) and transmission electron microscopy (TEM). WQ, AC and FC resulted in typical martensite, basket-weave and parallel-plate Widmanstatten structures, respectively. The experimental distribution of α/β-misorientations deviated from BOR at set discrete angles close to 22, 30, 35 and 43°.

View Article and Find Full Text PDF

The behavior of sputtering yield and the surface roughness of monocrystalline silicon of orientations ⟨100⟩, ⟨110⟩, and ⟨111⟩ under the ion-beam bombardment by neutralized Ar ions with energies of 200-1000 eV is studied. The significant dependence (modulation) of sputtering yield on incidence angle due to crystalline structure is observed. It is shown that a sharp increase in the sputtering yield and a decrease in the effective surface roughness at energies above 400 eV occurs.

View Article and Find Full Text PDF

A possibility of application of solid-phase analytical derivatization (SPAD) for the quantification of seven steroid hormones (testosterone, dihydrotestosterone, cortisone, cortisol, progesterone, 11α-hydroxyprogesterone, and estrone) in human urine was evaluated. To prepare urine samples for instrumental analysis, SPAD with hydroxylamine was applied after enzymatic hydrolysis of the sample. To achieve high recovery values, extraction and derivatization conditions were optimized.

View Article and Find Full Text PDF

Vaviloid spike branching, also called sham ramification, is a typical trait of Jakubz. and is characterized by a lengthening of the spikelet axis. In this article, we present the results of a study of three triticale-wheat hybrid lines with differences in terms of the manifestation of the vaviloid spike branching.

View Article and Find Full Text PDF

Anomalously high x-ray scattering at a wavelength of 0.154 nm by super-polished substrates of fused silica, which were etched by the argon ions with the energy of 300 eV, is detected. The scattering intensity increases monotonically with increasing of the etching depth.

View Article and Find Full Text PDF

The paper describes a multistage method of forming ultrasmooth substrates based on bulk beryllium. Such substrates are suggested to be used for multilayer extreme ultraviolet mirrors of spacecraft missions on solar corona investigations in the spectral range 17.1-58.

View Article and Find Full Text PDF

A comparative study was carried out of the structure and reflection performance of four types of multilayer mirror for extreme ultraviolet lithography at 11.2 nm; these were a pure Mo/Be structure and three Mo/Be-based structures with thin BC, C and Si interlayers. It was demonstrated that Mo/Be mirrors show maximum reflectance at normal incidence, while maximum structural perfection is shown by Mo/Be/Si mirrors.

View Article and Find Full Text PDF
Article Synopsis
  • The study investigated the sputtering yield and surface roughness dynamics of potassium dihydrogenphosphate (KDP) crystals after they were polished using a diamond cutter and treated with neutralized Ar ions.
  • The sputtering yield was significantly higher than that of materials typically polished by ions, indicating unique properties of KDP.
  • The research achieved an exceptional effective surface roughness measurement of 0.61 nm within a specified spatial frequency range, demonstrating the effectiveness of the polishing methods used.
View Article and Find Full Text PDF

We have studied the surface treatment of polished fused silica by neutralized Ar ions with energy of 500-1500 eV and incidence angles of 0-90°. We found the following regularities: for samples that passed the standard procedure of deep polishing (initial effective roughness σ(eff)∼0.5  nm), the effective roughness decreases to the ultrasmooth level (i.

View Article and Find Full Text PDF

The possibilities of applying the point diffraction interferometry (PDI) method for the detection of the middle spatial frequency roughness of superpolished optical surfaces are analyzed. The point source used in the experiment is based on a single mode optical fiber with the subwavelength exit aperture size, which is about 0.25 μm.

View Article and Find Full Text PDF

A description of a stand based on atomic force microscopy (AFM) for roughness measurements of large optical components with arbitrary surfaces is given. The sample under study is mounted on a uniaxial goniometer which allows the sample to be tilted in the range of ±30°. The inclination enables the local normal along the axis of the probe to be established at any point of the surface under study.

View Article and Find Full Text PDF

The main problems and the approach used by the authors for roughness metrology of super-smooth surfaces designed for diffraction-quality X-ray mirrors are discussed. The limitations of white light interferometry and the adequacy of the method of atomic force microscopy for surface roughness measurements in a wide range of spatial frequencies are shown and the results of the studies of the effect of etching by argon and xenon ions on the surface roughness of fused quartz and optical ceramics, Zerodur, ULE and Sitall, are given. Substrates of fused quartz and ULE with the roughness, satisfying the requirements of diffraction-quality optics intended for working in the spectral range below 10 nm, are made.

View Article and Find Full Text PDF

This work was aimed at estimating the role of special therapy of patients with bronchial asthma, COPD and hyperoxaluria designed to restrict the delivery or eliminate excess of oxalates and producing well apparent beneficial effect confirmed by the disappearance or decrease of clinical and functional manifestations of obstruction, reduction of requirements for broncholytic and anti-inflammatory agents.

View Article and Find Full Text PDF

We studied the role of oxalate release through the airways as a potential injurious factor in the development of inflammation, bronchial obstruction and cough syndrome (respiratory oxalosis). Detection of oxalates in bronhcoalveolar lavage fluid and daily urine is the most valuable method for diagnostics of oxalates. Systemic effects, such as cholelithiasis, urolithiasis, and spinal osteochondrosis are characteristic clinical signs of respiratory oxalosis, besides purely respiratory symptoms.

View Article and Find Full Text PDF

Aim: To evaluate peculiarities of a clinical course and changes in bronchial mucosa in bronchial asthma (BA) patients with chronic obstructive pulmonary disease (COPD) in combination with hyperoxaluria (HOU); informative value of some laboratory and device findings including oxalates assay in bronchial lavage fluid for specification of the diagnosis, role of oxalates in development of obstructive syndrome and choice of optimal therapy.

Material And Methods: Oxalates were examined in daily urine, bronchoalveolar lavage fluid and exhaled air condensate of 104 patients with BA and COPD, 77 of which had HOU and an atypical course of bronchial obstruction syndrome.

Results: Conception of airways inflammation in patients with oxalate metabolism disturbances is proposed.

View Article and Find Full Text PDF

In this work, we investigated surface active properties and biochemical composition of pulmonary surfactant under emotional stress in condition of neuropeptides pool exhaustion in capsaicin-sensitive afferents of the vagus nerve. It is shown that stress is accompanied by decrease of lung surface active properties and increase of total phospholipids content as result of phosphatidylcholine and lysophospholipid fraction rise. After capsaicin application on the cervical part of the right vagus nerve stress-induced alterations in ipsilateral lung become less considerable, whereas all spectra of changes in contralateral lung is remained.

View Article and Find Full Text PDF

Multilayer structures with short periods have been systematically investigated using a tunable soft X-ray synchrotron, BESSY II, and X-ray tube radiation. Multilayer X-ray mirrors of W/B(4)C, W/Sc, Mo/B(4)C, Mo/C, La/B(4)C, Cr/C and Cr/Sc, with periods from 0.8 nm to 3.

View Article and Find Full Text PDF

Acetylcholinesterase (ACE) activity and lipid peroxidation (LPO) parameters were measured in the blood of patients with Alzheimer's disease (AD) during treatment with amiridine and gliatiline. Treatment was accompanied by inhibition of ACE. There was a statistically significant relationship between clinical efficacy and changes in ACE activity.

View Article and Find Full Text PDF