Energy Metabolism Dysregulation in Myocardial Infarction: An Integrative Analysis of Ischemic Cardiomyopathy.

Background: Myocardial metabolism is closely related to functional changes after myocardial infarction (MI).

Objective: This study aimed to present an integrative examination of human ischemic cardiomyopathy.

Methods: We used both GSE121893 single-cell suspension sequencing and GSE19303 transcription microarray data sets from the GEO database, along with a murine MI model for full-spectrum metabolite detection.

Selenophene-fused Perylene Diimide-Based Cathode Interlayer Enables 19 % Efficiency Binary Organic Solar Cells via Stimulative Charge Extraction.

The cathode interlayer is crucial for the development of organic solar cells (OSCs), but the research on simple and efficient interlayer materials is lagging behind. Here, a donor-acceptor (D-A) typed selenophene-fused perylene diimide (PDI) derivative (SePDI3) is developed as cathode interlayer material (CIM) for OSCs, and a non-fused PDI derivative (PDI3) is used as the control CIM for comparison. Compared to PDI3, SePDI3 shows a stronger self-doping effect and better crystallinity, resulting in better charge transport ability.

Uridine-Modified Ruthenium(II) Complex as Lysosomal LIMP-2 Targeting Photodynamic Therapy Photosensitizer for the Treatment of Triple-Negative Breast Cancer.

Lysosome-targeted photodynamic therapy, which enhances reactive oxygen species (ROS)-responsive tumor cell death, has emerged as a promising strategy for cancer treatment. Herein, a uridine (dU)-modified Ru(II) complex (RdU) was synthesized by click chemistry. It was found that RdU exhibits impressive photo-induced inhibition against the growth of triple-negative breast cancer (TNBC) cells in normoxic and hypoxic microenvironments through ROS production.

Dithienoquinoxalineimide-Based Polymer Donor Enables All-Polymer Solar Cells Over 19 % Efficiency.

All-polymer solar cells (all-PSCs) have been regarded as one of the most promising candidates for commercial applications owing to their outstanding advantages such as mechanical flexibility, light weight and stable film morphology. However, compared to large amount of new-emerging excellent polymer acceptors, the development of high-performance polymer donor lags behind. Herein, a new D-π-A type polymer donor, namely QQ1, was developed based on dithienoquinoxalineimide (DTQI) as the A unit, benzodithiophene with thiophene-conjugated side chains (BDTT) as the D unit, and alkyl-thiophene as the π-bridge, respectively.

A-A-D-A-A-Type Nonfullerene Acceptors.

The A-A-D-A-A-type molecules consist of one electron-donating (D) core flanked by two electron-accepting units (A and A) and have emerged as an essential branch of nonfullerene acceptors (NFAs). These molecules generally possess higher molecular energy levels and wider optical bandgaps compared with those of the classic A-D-A- and A-DA'D-A-type NFAs, owing to the attenuated intramolecular charge transfer effect. These characteristics make them compelling choices for the fabrication of high-voltage organic photovoltaics (OPVs), ternary OPVs, and indoor OPVs.

Benzotriazole-Based 3D Four-Arm Small Molecules Enable 19.1 % Efficiency for PM6 : Y6-Based Ternary Organic Solar Cells.

A third component featuring a planar backbone structure similar to the binary host molecule has been the preferred ingredient for improving the photovoltaic performance of ternary organic solar cells (OSCs). In this work, we explored a new avenue that introduces 3D-structured molecules as guest acceptors. Spirobifluorene (SF) is chosen as the core to combine with three different terminal-modified (rhodanine, thiazolidinedione, and dicyano-substituted rhodanine) benzotriazole (BTA) units, affording three four-arm molecules, SF-BTA1, SF-BTA2, and SF-BTA3, respectively.

Dithienobenzothiadiazole (DTBT)-Based Polymers Enable Organic Solar Cells with Ultrahigh V of ≈1.3 V.

Dithieno[3',2':3,4;2",3":5,6]benzo[1,2-c][1,2,5]thiadiazole (DTBT) is a newly emerging building block to construct effective photovoltaic polymers. Organic solar cells (OSCs) based on DTBT-based polymers have realized power conversion efficiency (PCEs) over 18%, despite their relatively low open-circuit voltage (V ) of 0.8-0.

Novel Chiral Ru(II) Complexes as Potential c-myc G-quadruplex DNA Stabilizers Inducing DNA Damage to Suppress Triple-Negative Breast Cancer Progression.

Currently, effective drugs for triple-negative breast cancer (TNBC) are lacking in clinics. c-myc is one of the core members during TNBC tumorigenesis, and G-rich sequences in the promoter region can form a G-quadruplex conformation, indicating that the c-myc inhibitor is a possible strategy to fight cancer. Herein, a series of chiral ruthenium(II) complexes ([Ru(bpy)(DPPZ-R)](ClO), -1: R = -H, -2: R = -Br, -3: R = -C≡C(CH)NH) were researched based on their interaction with c-myc G-quadruplex DNA.

A circular network of purine metabolism as coregulators of dilated cardiomyopathy.

Background: The crosstalk of purine biosynthesis and metabolism exists to balance the cell energy production, proliferation, survival and cytoplasmic environment stability, but disorganized mechanics of with respect to developing heart failure (HF) is currently unknown.

Methods: We conducted a multi-omics wide analysis, including microarray-based transcriptomes, and full spectrum metabolomics with respect to chronic HF. Based on expression profiling by array, we applied a bioinformatics platform of quantifiable metabolic pathway changes based on gene set enrichment analysis (GSEA), gene set variation analysis (GSVA), Shapley Additive Explanations (SHAP), and Xtreme Gradient Boosting (XGBoost) algorithms to comprehensively analyze the dynamic changes of metabolic pathways and circular network in the HF development.

Multiple-cation wide-bandgap perovskite solar cells grown using cesium formate as the Cs precursor with high efficiency under sunlight and indoor illumination.

Owing to the advantages of adjustable bandgap, low-cost fabrication and superior photovoltaic performance, wide-bandgap (WBG) perovskite solar cells (PSCs) are considered as the promising top-cell for multi-junction solar cells. At the same time, WBG PSCs have also shown great potential for indoor photovoltaic applications. To further improve the performance of WBG PSCs, in this work, we fabricated efficient WBG PSCs introducing cesium formate (CsFa) as the Cs precursor.

Renewable bio-based adhesive fabricated from a novel biopolymer and soy protein.

In this study, a bio-based soy protein adhesive derived from environmentally friendly and renewable enzymatic hydrolysis lignin (EHL), epoxidized soybean oil (ESO), and soy protein isolate (SPI), was successfully prepared. A novel biopolymer (EHL-ESO), as a multifunctional crosslinker, was firstly synthesized from modified EHL and ESO, and then crosslinked with soy protein isolate to obtain a bio-based soy protein adhesive. The structure, thermal properties, and adhesion performance of the obtained soy protein adhesives were determined by Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and wet shear strength.

PTB7-Th-Based Organic Photovoltaic Cells with a High of over 1.0 V Fluorination and Side Chain Engineering of Benzotriazole-Containing Nonfullerene Acceptors.

is considered one of the most classic donor polymers for organic photovoltaic (OPV) cells. However, the power conversion efficiency (PCE) of -based OPV is lagging behind that of other promising polymers mainly because of the relatively low open-circuit voltage (). To increase the and PCE of -based OPV, the development of nonfullerene acceptors (NFAs) and studies of structure-property-performance relationship are vital.

Evaluation of a Novel Left Ventricular Assist Device for Resuscitation in an Animal Model of Ventricular Fibrillation Cardiac Arrest.

We evaluated an independently developed novel percutaneous implantable left ventricular assist device for resuscitation in a pig model of ventricular fibrillation cardiac arrest. The model was established in 10 domestic pigs by blocking the anterior descending coronary artery with a balloon after anesthesia. With ventilator-assisted ventilation, the independently developed percutaneous implantable left ventricular assist device was inserted via the femoral artery to assist circulation.

Visible-Light-Enabled Organocatalyzed Controlled Alternating Terpolymerization of Perfluorinated Vinyl Ethers.

Polymerizations of perfluorinated vinyl ethers (PFVEs) provide an important category of fluoropolymers that have received considerable interests in applications. In this work, we report the development of an organocatalyzed controlled radical alternating terpolymerization of PFVEs and vinyl ethers (VEs) under visible-light irradiation. This method not only enables the synthesis of a broad scope of fluorinated terpolymers of low dispersities and high chain-end fidelity, facilitating tuning the chemical compositions by rationally choosing the type and/or ratio of comonomers, but also allows temporal control of chain-growth, as well as the preparation of a variety of novel fluorinated block copolymers.

Solvent-Free Synthesis of the Polymer Electrolyte via Photo-Controlled Radical Polymerization: Toward Ultrafast In-Built Fabrication of Solid-State Batteries under Visible Light.

Thin solid polymer electrolytes (SPEs) with good processability, improved room-temperature ionic conductivity, and better interfacial compatibility are urgently needed to develop solid-state batteries without safety and leakage issues. In-built electrolyte polymerization has emerged as a novel and effective platform to obtain such electrolytes. However, existing in-built methods usually involve heat, UV, γ irradiation, and so forth to initiate the polymerization and often require the addition of solvents to avoid the concentrated active propagating species, which inevitably afford solvent residues that persist in the electrolyte matrix, leading to complex SPE preparation processes, safety hazards, and side reactions with the electrodes.

Hybrid Hole Extraction Layer Enabled High Efficiency in Polymer Solar Cells.

Charge extraction layers with excellent charge extraction capability are essential for achieving high photovoltaic performance in cells. In this work, a hole extraction layer (HEL) is developed by doping conductive polymer TFB into CuSCN (CuSCN:TFB(X)), which exhibits good light transparency and high affinity for the light absorber. Compared to the reference cell, the CuSCN:TFB(X) HEL-based cells show impressive enhancement owing to the increased exciton dissociation and charge extraction processes and weak recombination losses.

A functionalized metal organic framework-laden nanoporous polymer electrolyte for exceptionally stable lithium electrodeposition.

A nanoporous all-solid-state MOF-laden polymer electrolyte that is simply mediated by an electronic effect shows remarkably high lithium electrodeposition stability of hundreds of charge-discharge cycles and over 1500 operating hours, while maintaining a very small voltage polarization. This result is a significant improvement relative to conventional PEO and, when used in an all-solid-state battery (ASSB), this electrolyte enabled enhanced cycle life. This new all-solid-state electrolyte shows a promising rational design for the emerging microporous polymeric materials as novel SPEs in ASSBs.

Fluorous-Core Nanoparticle-Embedded Hydrogel Synthesized via Tandem Photo-Controlled Radical Polymerization: Facilitating the Separation of Perfluorinated Alkyl Substances from Water.

Per- and polyfluorinated alkyl substances (PFASs) are broadly used as surfactants and water/oil repellents for many decades. However, they are toxic, environmental persistence, and widely detected in water sources. In this work, we developed a fluorous-core nanoparticle-embedded hydrogel (FCH) synthesized by the metal-free tandem photocontrolled radical polymerization under visible-light irradiation.

Preparation and characterization of a soy protein based bio-adhesive crosslinked by waterborne epoxy resin and polyacrylamide.

A simple and useful approach by using non-toxic and water-soluble raw material to improve the bonding properties of soy protein adhesive has attracted much attention recently. The objective of this research was to provide a simple and environmentally friendly approach for preparing a high adhesion performance soy protein adhesive in aqueous solution by using waterborne-epoxy resin, soy protein and water-soluble polyacrylamide (PAM). The chemical structure and curing characteristics, as well as the initial viscosity and adhesion performance of the resulted soy protein adhesive were characterized by H nuclear magnetic resonance (H-NMR), differential scanning calorimetry (DSC), a rotary viscosity meter and a plywood panel test.

Urea-Doped ZnO Films as the Electron Transport Layer for High Efficiency Inverted Polymer Solar Cells.

In this paper, urea-doped ZnO (U-ZnO) is investigated as a modified electron transport layer (ETL) in inverted polymer solar cells (PSCs). Using a blend of Poly{4,8-bis[(2-ethylhexyl)oxy] benzo [1,2-b:4,5-b'] dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno [3,4-b] thiophene-4,6-diyl}(PTB7), and [6,6]-phenyl-C71-butyric acid methyl ester (PCBM) as light absorber, a champion power conversion efficiency (PCE) of 9.15% for U-ZnO ETL based PSCs was obtained, which is 15% higher than that of the pure ZnO ETL based PSCs (7.

Complete mitochondrial genome of a Siberian Crane ().

The complete mitochondrial genome (mtDNA) of hemocyte from Siberian Crane () was sequenced using high-throughput genetic sequencing, and mitochondrial genome was assembled using MITObim tools according complete mitochondrial genome of (NCBI Reference Sequence: NC_020574.1). The assembled mitogenome, consisting of 16,747 bp, has unique 14 protein-coding genes (PCGs), 22 transfer RNAs, and two ribosomal RNAs genes.

A single-center observational study on the efficacy of percutaneous coronary intervention for ischemic heart failure: A cohort study.

The effects of revascularization by percutaneous coronary intervention (PCI) on cardiac function and clinical outcomes in patients with confirmed coronary artery disease (CAD) and heart failure (HF), on the basis of the optimal medical treatment recommended by current guidelines, remain to be determined.A cohort study was performed to evaluate the efficacy of PCI on the basis of optimal medical treatment in patients with CAD and HF. Patients who received PCI were subsequently grouped according to partial and complete revascularization (CR) depending on the PCI outcome.

Solution-Processable ZnO/Carbon Quantum Dots Electron Extraction Layer for Highly Efficient Polymer Solar Cells.

In this work, we report the effort to develop high-efficiency inverted polymer solar cells (PSCs) by applying a solution-processable bilayer ZnO/carbon quantum dots (C-QDs) electron extraction layer (EEL). It is shown that the use of the bilayer EEL helps to suppress the exciton quenching by passivating the ZnO surface defects in the EEL, leading to an enhanced exciton dissociation, reduced charge recombination and more efficient charge extraction probability, and thereby achieving high power conversion efficiency (PCE). The inverted PSCs, based on the blend of poly{4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophene-4,6-diyl} and [6,6]-phenyl C71-butyric acid methyl ester, possess a significant improvement in PCE of ∼9.

[The Simulation Experiment of Control System for Left Ventricular Assist Device].

Objective: To test the accuracy, the reliability and the stability of flow-controlling method of a new percutaneous left ventricular assist device.

Methods: With the AMEsim to set up a simulation model, analysis the variations of motor speed, flow and pressure by adjusting the size of valve. and we test the improved-theoretical model with outside experiment.