10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser at 1 µm.

A 10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser (SFFL) at 1 µm is experimentally demonstrated, based on dual gain saturation effects from semiconductors and optical fibers, together with an analog-digital hybrid optoelectronic feedback loop. Three intensity-noise-inhibited units synergistically work, which actualizes a connection of effective bandwidth and enhancement of noise-suppressing amplitude. With the cascade action of the semiconductor optical amplifier and optical fiber amplifier, the laser power is remarkably boosted.

Single-frequency fiber laser at 1627 nm based on a self-designed Er-doped hybridized glass fiber.

Aiming at applications like expanding usable wave band of optical telecommunication and preparing Sr optical lattice clocks, a 1627 nm single-frequency fiber laser (SFFL) is demonstrated based on a 7-m-long self-designed Er-doped hybridized glass fiber (EDHF) and a linear cavity configuration with a loop mirror filter (LMF). By inserting a 10-m-long unpumped commercial Er-doped fiber as a dynamic Bragg grating into the LMF, a stable single-longitudinal-mode (SLM) laser with an output power of about 10 mW is obtained. The optical signal-to-noise ratio (OSNR) of SFFL is over 50 dB, and the linewidth is about 3.

High-sensitivity hemoglobin detection based on polarization-differential spectrophotometry.

Hemoglobin content is recognized as a momentous and fundamental physiological indicator, especially the precise detection of trace hemoglobin is of great significance for early diagnosis and prevention of tumors, cancer, organic injury, etc. Therefore, high-sensitivity hemoglobin detection is imperative. However, effective detection methods and reliable detection systems are still lacking and remain enormous challenges.

Ultrafine electro-optical frequency comb based on cascade phase modulation with cyclic frequency shifting.

An ultrafine electro-optical frequency comb (EOFC) with plentiful comb teeth is demonstrated. Adopting a single-frequency fiber laser as a light source, cascade phase modulation based on a sinusoidal signal and a frequency-time transformation (FTT) signal is executed to generate the EOFC with high fineness. Meanwhile, a cyclic fast frequency shifting strategy is introduced to boost the number of comb teeth and the bandwidth of the EOFC.

Wideband ultra-low intensity noise reduction via joint action of gain saturation and out-of-phase polarization mixing effect from a semiconductor optical amplifier.

In this article, the vector dynamics of semiconductor optical amplifiers (SOAs) are systematically analyzed and developed to explore its mechanism of intensity noise suppression. First, theoretical investigation on the gain saturation effect and carrier dynamics is performed via a vectorial model, and the calculated result unravels desynchronized intensity fluctuations of two orthogonal polarization states. Particularly, it predicts an out-of-phase case, which allows the cancellation of the fluctuations via adding up the orthogonally-polarized components, then establishes a synthetic optical field with stable amplitude and dynamic polarization, and thereby enables a remarkable relative intensity noise (RIN) reduction.

Simultaneous achievement of power boost and low-frequency intensity noise suppression in a bidirectional pumping fiber amplifier based on saturated even-distribution gain.

An optimized bidirectional pumping fiber amplifier is demonstrated to achieve low-frequency intensity noise suppression and effective power enhancement simultaneously. Based on the concept analysis of the gain saturation effect, the influence of input signal power and pump power on intensity noise suppression is investigated and optimized systematically. Further combining with the optimization of the pumping configuration to achieve the even-distribution gain, the relative intensity noise (RIN) of 1083 nm single-frequency fiber laser (SFFL) is suppressed with 9.

Pulse compression of a single-frequency Q-switched fiber laser based on the cascaded four-wave mixing effect.

A pulse compressing technology of single-frequency Q-switched laser based on the cascaded four-wave mixing (CFWM) effect is demonstrated theoretically and experimentally, for the first time to the best of our knowledge. A theoretical model of the pulse compression is established through deconstructing the pulse duration evolution in the high-order Stokes and anti-Stokes lights of CFWM. A pulse compression ratio of (2|m|+1) is quantificationally obtained with m corresponding to the order number of the CFWM light.

Over-20-octaves-bandwidth ultralow-intensity-noise 1064-nm single-frequency fiber laser based on a comprehensive all-optical technique.

An over-20-octaves-bandwidth ultralow-intensity-noise 1064-nm single-frequency fiber laser (SFFL) is demonstrated based on a comprehensive all-optical technique. With a joint action of booster optical amplifier (BOA) and reflective Yb-doped fiber amplifier (RYDFA), two-fold optical gain saturation effects, respectively occurring in the media of semiconductor and fiber, have been synthetically leveraged. Benefiting from the gain dynamics in complementary time scales, i.

Compact passively Q-switched single-frequency distributed Bragg reflector fiber laser at 2.0 µm.

Based mainly on the distributed Bragg reflector (DBR) short linear cavity with a 1.6-cm-long heavily -doped germanate glass fiber and semiconductor saturable absorber mirror (SESAM), a compact passively -switched single-frequency fiber laser at around 1950 nm is demonstrated experimentally. By comparing pulse characters of -switched operations fulfilled via SESAMs with different parameters, a stable output pulse is optimized to deliver a maximum average power of 22.

Noise-sideband-free and narrow-linewidth photonic microwave generation based on anoptical heterodyne technique of low-noise fiber lasers.

Noise-sideband-free and narrow-linewidth photonic microwave generation based on an optical heterodyne technique is demonstrated experimentally. By beating a self-injection-locking low-noise single-frequency fiber laser and a Brillouin fiber laser, a 9.4 GHz microwave is produced, and its noise sidebands are completely suppressed.

15 W high OSNR kHz-linewidth linearly-polarized all-fiber single-frequency MOPA at 1.6 μm.

A 1603 nm high optical signal-to-noise ratio (OSNR) kHz-linewidth linearly-polarized all-fiber single-frequency master-oscillator power amplifier (MOPA) is demonstrated. To suppress the amplified spontaneous emission from Yb/Er ions with the customized filters and optimize the length of the double cladding active fiber, an over 15 W stable single-longitudinal-mode laser is achieved with an OSNR of >70 dB. A measured laser linewidth of 4.

Near quantum-noise limited and absolute frequency stabilized 1083 nm single-frequency fiber laser.

The Earth's magnetic field has significant effects that protect us from cosmic radiation and provide navigation for biological migration. However, slow temporal variations originating in the liquid outer core invariably exist. To understand the working mechanism of the geomagnetic field and improve accuracy of navigation systems, a high-precision magnetometer is essential to measure the absolute magnetic field.

kHz-order linewidth controllable 1550 nm single-frequency fiber laser for coherent optical communication.

A kHz-order linewidth controllable 1550 nm single-frequency fiber laser (SFFL) is demonstrated for the first time to our best knowledge. The control of the linewidth is realized by using a low-pass filtered white Gaussian noise (WGN) signal applied on a fiber stretcher in an optical feedback loop. Utilizing WGN signals with different signal amplitudes An and different cutoff frequencies fc, the linewidths are availably controlled in a wide range from 0.

High-power and near-shot-noise-limited intensity noise all-fiber single-frequency 1.5 μm MOPA laser.

An all-fiber high-power and broad-frequency-band near-shot-noise-limited kHz-linewidth (Δν ~1.7 kHz) single-frequency master-oscillator power amplifier (MOPA) laser at 1.5 μm is demonstrated.

Frequency noise of distributed Bragg reflector single-frequency fiber laser.

We investigated the frequency noise in the distributed Bragg reflector single-frequency fiber laser (DBR-SFFL) theoretically and experimentally. A complete theoretical analysis is demonstrated by considering the energy-transfer upconversion (ETU) process and establishing linkages between the frequency noise and the relative intensity noise (RIN) of the DBR-SFFL. The experimental results of the diverse DBR-SFFLs in different working conditions are in good agreement with the theoretical analyses.

Self-injection locked and semiconductor amplified ultrashort cavity single-frequency Yb-doped phosphate fiber laser at 978 nm.

Based on a self-injection locking scheme and the nonlinear amplification effect of a semiconductor optical amplifier, a low intensity noise amplified ultrashort cavity single-frequency fiber laser at 978 nm is demonstrated with a final output power of > 230 mW and a broad temperature range of > 15 °C for single-longitudinal-mode operation. The effective cavity length of the fiber oscillator is less than 6 mm, comprising a 3.5-mm-long highly Yb-doped phosphate fiber and a pair of fiber Bragg gratings.

1120 nm kHz-linewidth single-polarization single-frequency Yb-doped phosphate fiber laser.

A spectrally clean kHz-linewidth single-polarization single-frequency distributed Bragg reflector Yb-doped phosphate fiber (YPF) laser at 1120 nm (> 1100 nm) for the first time is demonstrated. By enhancing the reflectivity of output fiber Bragg grating and optimizing the length of YPF to implement the effective ASE suppression and single-longitudinal-mode long-wavelength lasing, a stable output power of over 62 mW is achieved from a 31-mm-long highly YPF with a linewidth of 5.7 kHz.

Ultra-narrow linewidth full C-band tunable single-frequency linear-polarization fiber laser.

An ultra-narrow linewidth full C-band tunable single-frequency linear-polarization fiber laser based on self-injection locking has been demonstrated. By the use of a tunable narrow-band fiber Fabry-Perot interferometer, the laser wavelength could be flexibly tuned from 1527 to 1563 nm with linewidths of < 700 Hz. The laser frequency noise is less than 40 dB re Hz/Hz at low frequencies (< 100 Hz) and reaches -5 dB re Hz/Hz at around 25 kHz.

Linewidth suppression mechanism of self-injection locked single-frequency fiber laser.

Linewidth suppression mechanism of the self-injection locked single-frequency fiber laser (SFFL) is investigated theoretically and experimentally. An analytical model based on the semi-phenomenological approach is built up to characterize the optical feedback in SFFL. According to the theoretical prediction, the linewidth tends to be reduced with longer external cavity photon lifetime.

Dual-wavelength passively q-switched single-frequency fiber laser.

We propose a compact dual-wavelength Q-switched single-frequency fiber laser based on a 17-mm-long home-made highly Er/Yb co-doped phosphate fiber (EYDPF) and a semiconductor saturable absorber mirror (SESAM). The short cavity length and a polarization-maintaining fiber Bragg grating (PM-FBG) ensure that only one longitudinal mode is supported by each reflection peak. The maximum pulse energy of more than 34.

Short all Tm-doped germanate glass fiber MOPA single-frequency laser at 1.95 μm.

Based on heavily Tm-doped germanate glass fibers (TGFs), a short all-TGF MOPA laser system with uniform core parameters in each stage was demonstrated. An 11.7 W stable single-frequency laser at 1.

Broad-bandwidth near-shot-noise-limited intensity noise suppression of a single-frequency fiber laser.

A significant broad-bandwidth near-shot-noise-limited intensity noise suppression of a single-frequency fiber laser is demonstrated based on a semiconductor optical amplifier (SOA) with optoelectronic feedback. By exploiting the gain saturation effect of the SOA and the intensity feedback loop, a maximum noise suppression of over 50 dB around the relaxation oscillation frequencies and a suppression bandwidth of up to 50 MHz are obtained. The relative intensity noise of -150  dB/Hz in the frequency range from 0.

Linearly frequency-modulated pulsed single-frequency fiber laser at 1083 nm.

A linearly frequency-modulated, actively Q-switched, single-frequency ring fiber laser based on injection seeding from an ultra-short cavity is demonstrated at 1083 nm. A piezoelectric transducer is employed to obtain linearly frequency-modulating performance and over 1.05 GHz frequency-tuning range is achieved with a modulating frequency reaching tens of kilohertz.

All-optical frequency and intensity noise suppression of single-frequency fiber laser.

An all-optical frequency and intensity noise suppression technique of a single-frequency fiber laser is demonstrated. By exploiting the recursive noise reduction effect of a semiconductor optical amplifier (SOA) in a self-injection locked fiber laser, the frequency and intensity noise of the laser are remarkably suppressed in a significantly wide frequency range. In addition to the linewidth suppression from 3.

600-Hz linewidth short-linear-cavity fiber laser.

We proposed a short-linear-cavity (SLC) fiber laser based on a virtual-folded-ring (VFR) resonator and a fiber Bragg grating Fabry-Perot filter. Spatial hole burning effect was reduced by retarding the polarization state of the counter-propagating light waves utilizing the VFR structure. The photon lifetime of the resonator was extended due to the multi-reflection inside the FBG FP, which increased the intra-cavity power and relatively suppressed the contribution of phase diffusion from spontaneous emission.