Volume-Metallization 3D-Printed Polymer Composites.

3D printing polymer or metal can achieve complicated structures while lacking multifunctional performance. Combined printing of polymer and metal is desirable and challenging due to their insurmountable mismatch in melting-point temperatures. Here, a novel volume-metallization 3D-printed polymer composite (VMPC) with bicontinuous phases for enabling coupled structure and function, which are prepared by infilling low-melting-point metal (LM) to controllable porous configuration is reported.

Preparation of eGaIn NDs/TPU Composites for X-ray Radiation Shielding Based on Electrostatic Spinning Technology.

Thermoplastic polyurethane (TPU) composites with eutectic gallium (Ga) and indium (In) (eGaIn) fillings of 0 wt%-75 wt% were prepared using the electrostatic spinning method. Field emission scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FTIR) spectroscopy were used to characterize the eGaIn NDs/TPU composites. To evaluate their X-ray shielding properties, Phy-X/PSD and WinXCom were employed to calculate the mass attenuation coefficients, linear attenuation coefficients, half-value layers, tenth value layers, mean free paths, and adequate atomic numbers of the eGaIn NDs/TPU composites.

Bismuth-based liquid metals: advances, applications, and prospects.

Bismuth-based liquid metals (LMs) are a large group of alloys with melting points slightly above room temperature. They are associated with fewer encapsulation constraints than room temperature LMs such as mercury, sodium-potassium alloys, and gallium-based alloys and are more likely to remain stable in the natural environment. In addition, their low melting point properties enable them to soften and melt easy control.

Liquid-Metal Molecular Scissors.

Molecules are the smallest units of matter that can exist independently, relatively stable, maintaining their physical and chemical activities. The key factors that dominate the structures and properties of molecules include atomic species, alignment commands, and chemical bonds. Herein, we reported a generalized effect in which liquid metals can directly cut off oxygen-containing groups in molecular matter at room temperature, allowing the remaining groups to recombine to form functional materials.

Liquid Metal-Based Flexible Bioelectrodes for Management of In-Stent-Restenosis: Potential Application.

Although vascular stents have been widely used in clinical practice, there is still a risk of in-stent restenosis after their implantation. Combining conventional vascular stents with liquid metal-based electrodes with impedance detection, irreversible electroporation, and blood pressure detection provides a new direction to completely solve the restenosis problem. Compared with conventional rigid electrodes, liquid metal-based electrodes combine high conductivity and stretchability, and are more compliant with the implantation process of vascular stents and remain in the vasculature for a long period of time.

Amorphous TiO shells: an Essential Elastic Buffer Layer for High-Performance Self-Healing Eutectic GaSn Nano-Droplet Room-Temperature Liquid Metal Battery.

Gallium-based alloy liquid metal batteries currently face limitations such as volume expansion, unstable solid electrolyte interface (SEI) film and substantial capacity decay. In this study, amorphous titanium dioxide is used to coat eutectic GaSn nanodroplets (eGaSn NDs) to construct the core-shell structure of eGaSn@TiO nanodroplets (eGaSn@TiO NDs). The amorphous TiO shell (~6.

Pressure Driven Rapid Reconfigurable Liquid Metal Patterning.

This paper proposes a method for pressure driven rapid reconfigurable liquid metal patterning. A sandwich structure of "pattern-film-cavity" is designed to complete this function. Both sides of the highly elastic polymer film are bonded with two PDMS slabs.

Liquid Metal-Based Electrode Array for Neural Signal Recording.

Neural electrodes are core devices for research in neuroscience, neurological diseases, and neural-machine interfacing. They build a bridge between the cerebral nervous system and electronic devices. Most of the neural electrodes in use are based on rigid materials that differ significantly from biological neural tissue in flexibility and tensile properties.

Phase change composites of octadecane and gallium with expanded graphite as a carrier.

Phase change materials (PCMs) have attracted more and more attention in the field of energy and thermal management due to the characteristic of exchanging heat with small temperature change. In order to obtain perfect PCMs, previous researchers usually prepared various phase change composites (PCCs), but there is still a gap toward the goal. Perhaps the development of PCMs with adjustable properties in a wide range to meet different needs is a feasible option.

A U-Shaped Dual-Frequency-Reconfigurable Monopole Antenna Based on Liquid Metal.

This study presents a U-shaped dual-frequency-reconfigurable liquid-metal monopole antenna. Eutectic Gallium-Indium (EGaIn) was used as a conductive fluid and filled in the two branches of the U-shaped glass tube. A precision syringe pump was connected to one of the branches of the U-shaped tube by a silicone tube to drive EGaIn, forming a height difference between the two liquid levels.

Self-Assembled Copper Film-Enabled Liquid Metal Core-Shell Composite.

Liquid metal (LM) droplets covered with functional materials, especially metallic, often make breakthroughs in performance and functionality. In this study, self-assembly was used to synthesize copper films on the surface of LM. Herein, using CuO nanoparticles as the monomers, driven by the electrostatic interaction between CuO and eutectic gallium-indium (EGaIn) in the alkaline environment, EGaIn@Cu is realized by taking advantage of the reducing property of the EGaIn-alkaline interface.

A handy reversible bonding technology and its application on fabrication of an on-chip liquid metal micro-thermocouple.

We report a novel reversible bonding technique for liquid metal (LM) microelectrode fabrication in this study. This technique greatly simplifies the process of LM micro-electrode fabrication and can be used to achieve the rapid fabrication of LM blind-end electrodes. Three kinds of treatments, including heat treatment, plasma treatment and heat/plasma treatment, were tested for bonding strength.

A Gravity-Triggered Liquid Metal Patch Antenna with Reconfigurable Frequency.

In this paper, a gravity-triggered liquid metal microstrip patch antenna with reconfigurable frequency is proposed with experimental verification. In this work, the substrate of the antenna is quickly obtained through three-dimensional (3D) printing technology. Non-toxic EGaIn alloy is filled into the resin substrate as a radiation patch, and the NaOH solution is used to remove the oxide film of EGaIn.

The Design and Manufacturing Process of an Electrolyte-Free Liquid Metal Frequency-Reconfigurable Antenna.

This communication provides an integrated process route of smelting gallium-based liquid metal (GBLM) in a high vacuum, and injecting GBLM into the antenna channel in high-pressure protective gas, which avoids the oxidation of GBLM during smelting and filling. Then, a frequency-reconfigurable antenna, utilizing the thermal expansion characteristic of GBLM, is proposed. To drive GBLM into an air-proof space, the thermal expansion characteristics of GBLM are required.

High performance liquid metal thermal interface materials.

Conventional thermal interface materials (TIMs) as widely used in thermal management area is inherently limited by their relatively low thermal conductivity. From an alternative, the newly emerging liquid metal based thermal interface materials (LM-TIMs) open a rather promising way, which can pronouncedly improve the thermal contact resistance and offers tremendous opportunities for making powerful thermal management materials. The LM-TIMs thus prepared exhibits superior thermal conductivity over many conventional TIMs which guarantees its significant application prospect.

A Liquid-Metal-Based Dielectrophoretic Microdroplet Generator.

This paper proposes a novel microdroplet generator based on the dielectrophoretic (DEP) force. Unlike the conventional continuous microfluidic droplet generator, this droplet generator is more like "invisible electric scissors". It can cut the droplet off from the fluid matrix and modify droplets' length precisely by controlling the electrodes' length and position.

Stretchable Pressure Sensor with Leakage-Free Liquid-Metal Electrodes.

Nowadays, with the development of wearable devices, stretchable pressure sensors have been widely adopted in all kinds of areas. Most of the sensors aim to detect small pressure, such as fingertip tactile sensing, but only a few are focused on high-pressure sensing, such as foot pressure sensing during men's walking. In this work, a liquid metal-based stretchable sensor for large-pressure measurement is investigated.

Development of a High Flow Rate 3-D Electroosmotic Flow Pump.

A low voltage 3D parallel electroosmotic flow (EOF) pump composed of two electrode layers and a fluid layer is proposed in this work. The fluid layer contains twenty parallel fluid channels and is set at the middle of the two electrode layers. The distance between fluid and electrode channels was controlled to be under 45 μm, to reduce the driving voltage.

A liquid metal based capacitive soft pressure microsensor.

A liquid-metal based capacitive soft pressure microsensor is proposed in this work for measuring pressure in microchannels. To measure the pressure of the target microchannel, a short detection channel is fabricated and connected to the target microchannel. Because the detection channel has only one outlet at the end which is connected to the target microchannel, the fluid in the detection channel will stay still during the measurement and the pressure remains constant inside the detection channel.

A Handy Flexible Micro-Thermocouple Using Low-Melting-Point Metal Alloys.

A handy, flexible micro-thermocouple using low-melting-point metal alloys is proposed in this paper. The thermocouple has the advantages of simple fabrication and convenient integration. Bismuth/gallium-based mixed alloys are used as thermocouple materials.

A Handy Liquid Metal Based Non-Invasive Electrophoretic Particle Microtrap.

A handy liquid metal based non-invasive particle microtrap was proposed and demonstrated in this work. This kind of microtrap can be easily designed and fabricated at any location of a microfluidic chip to perform precise particle trapping and releasing without disturbing the microchannel itself. The microsystem demonstrated in this work utilized silicon oil as the continuous phase and fluorescent particles (PE-Cy5, SPHERO Fluorescent Particles, BioLegend, San Diego, CA, USA, 10.

Liquid metal bath as conformable soft electrodes for target tissue ablation in radio-frequency ablation therapy.

Background: Radio-frequency ablation has been an important physical method for tumor hyperthermia therapy. The conventional rigid electrode boards are often uncomfortable and inconvenient for performing surgery on irregular tumors, especially for those tumors near the joints, such as ankles, knee-joints or other facets like finger joints.

Material And Methods: We proposed and demonstrated a highly conformable tumor ablation strategy through introducing liquid metal bath as conformable soft electrodes.

Chemothermal therapy for localized heating and ablation of tumor.

Chemothermal therapy is a new hyperthermia treatment on tumor using heat released from exothermic chemical reaction between the injected reactants and the diseased tissues. With the highly minimally invasive feature and localized heating performance, this method is expected to overcome the ubiquitous shortcomings encountered by many existing hyperthermia approaches in ablating irregular tumor. This review provides a relatively comprehensive review on the latest advancements and state of the art in chemothermal therapy.

A review of hyperthermia combined with radiotherapy/chemotherapy on malignant tumors.

Therapeutic hyperthermia is a procedure that involves heating tissues to a higher temperature level, typically ranging from 41 degrees C to 45 degrees C. Its combination with radiotherapy and/or chemotherapy has been performed for many years, with remarkable success in treating advanced and recurrent cancers. The current hyperthermia strategies generally include local, regional, and whole-body hyperthermia, which can be implemented by many heating methods, such as microwave, radiofrequency, laser, and ultrasound.

Nano-cryosurgery: advances and challenges.

In clinics, the minimally invasive freezing therapy, commonly known as cryosurgery, has been increasingly used for the controlled destruction of tumor tissue. However, there are still many bottlenecks to impede the success of a cryosurgery. One of the most critical factors has been that insufficient or inappropriate freezing will not completely destroy the target tumor tissues, which as a result may lead to tumor regenesis and thus failure of treatment.