Random walk reduction in dithered ring laser gyroscope.

We experimentally demonstrated that the random walk in a dithered ring laser gyroscope caused by lock-in crossing can be eliminated by lock-in error compensation. Computer simulations demonstrated the effectiveness of this method. The experimental results show that the random walk coefficient can be reduced as predicted.

High-sensitivity force sensing using a phonon laser in an active levitated optomechanical system.

Force detection with high sensitivity is of paramount importance in many fields of study, from gravitational wave detection to investigations of surface forces. Here, we propose and demonstrate a force-sensing method based on gain-enhanced nonlinearity in a nonlinear phonon laser. Experimental and simulation results show that the input force leads to the frequency shift of phonon laser, due to nonlinearity.

Structured-light displacement detection method using split-waveplate for dual-beam optical tweezers.

Structured-light displacement detection method is an innovative approach with extremely high sensitivity for measuring the displacement of a levitated particle. This scheme includes two key components, a split-waveplate (SWP) and a single-mode fiber. In this work, we further investigated the influence of SWP installation on this method regarding the sensitivity of displacement detection.

Characteristics of the phonon laser in the active levitated optomechanical system.

Phonon lasers, coherent oscillations of phonons, have gradually become one of the emerging frontiers in the last decades, and have promising applications in quantum sensing, information processing, and precise measurement. Recently, phonon lasers based on dissipative coupling have been realized in an active levitated optomechanical (LOM) system for the first time. Here, we further investigated the characteristics of the phonon laser in the system above regarding the oscillator amplitude and the phonon laser linewidth.

Millimeter-scale ultrathin suspended metasurface integrated high-finesse optomechanical cavity.

A typical optomechanical system is a cavity with one movable mirror and one fixed mirror. However, this configuration has been considered incapable of integrating sensitive mechanical elements while maintaining high cavity finesse. Although the membrane-in-the-middle solution seems to be able to overcome this contradiction, it introduces additional components that will lead to unexpected insertion loss, resulting in reduced cavity quality.

Enhanced optical trapping of ZrO@TiO photonic force probe with broadened solvent compatibility.

Optical trapping and manipulating nanoparticles are essential tools for interrogating biomedicine at the limits of space and time. Typically, silica or polystyrene microspheres are used as photonic force probes. However, adapting those probes to organic solvents is an ongoing challenge due to the limited solvent compatibility and low refractive index mismatch.

Study of a Mode Separation Due to Polarization Existing in a Cavity-Enhanced Absorption Spectroscopy.

A special phenomenon of resonance mode separation is observed during the study of a high sensitivity folded-cavity enhanced absorption spectroscopy for the measurement of trace gases. The phenomenon affects the measurement of gas absorption spectrum in the cavity. This resonant mode separation phenomenon of the resonant cavity is different from the resonant modes previously observed in linear-cavity enhanced absorption spectroscopy systems.

A 5.86 Million Quality Factor Cylindrical Resonator with Improved Structural Design Based on Thermoelastic Dissipation Analysis.

The cylindrical resonator is the core component of cylindrical resonator gyroscopes (CRGs). The quality factor (Q factor) of the resonator is one crucial parameter that determines the performance of the gyroscope. In this paper, the finite element method is used to theoretically investigate the influence of the thermoelastic dissipation (TED) of the cylindrical resonator.

A suspended metasurface achieves complete light absorption: a 50 nm-thick optical nanomicrophone.

Considerably subtle vibrations can be detected by light signals. Commonly, this is achieved based on the phase change of light that can be attributed to the vibration of a movable mirror, which has been used in gravitational wave detection. For a homogeneous dielectric membrane, the thinner the membrane, the greater the membrane vibration amplitude will be with respect to the sound pressure.

Influence of Electrostatic Forces on the Vibrational Characteristics of Resonators for Coriolis Vibratory Gyroscopes.

The Coriolis Vibratory Gyroscopes are a type of sensors that measure angular velocities through the Coriolis effect. The resonator is the critical component of the CVGs, the vibrational characteristics of which, including the resonant frequency, frequency mismatch, Q factor, and Q factor asymmetry, have a great influence on the performance of CVG. The frequency mismatch and Q factor of the resonator, in particular, directly determine the precision and drift characteristics of the gyroscope.

Application of Near-Infrared Optical Feedback Cavity Enhanced Absorption Spectroscopy (OF-CEAS) to the Detection of Ammonia in Exhaled Human Breath.

The qualitative and quantitative analysis to trace gas in exhaled human breath has become a promising technique in biomedical applications such as disease diagnosis and health status monitoring. This paper describes an application of a high spectral resolution optical feedback cavity enhanced absorption spectroscopy (OF-CEAS) for ammonia detection in exhaled human breath, and the main interference of gases such as CO and HO are approximately eliminated at the same time. With appropriate optical feedback, a fibered distributed feedback (DFB) diode laser emitting at 1531.

Imbalance of Th22/Treg cells causes microinflammation in uremic patients undergoing hemodialysis.

Background: Regulatory T (Treg) cells are of critical functionality in immune activation and inflammation in uremic patients undergoing hemodialysis (HD). A disruption in balance of Treg cells has potency to elicit infectious disease progression. Here, we examined possible association between ratio imbalance of Th22/Treg cells and microinflammation in uremic patients undergoing HD.

Cylindrical Fused Silica Resonators Driven by PZT Thin Film Electrodes with Q Factor Achieving 2.89 Million after Coating.

Cylindrical shell fused silica resonators coated with 8 axisymmetric Pb(ZrTi)O (PZT) thin film electrodes (thickness ~2 μm) were reported. The resonators were firstly designed and fabricated, then annealed and processed by chemical etching to increase mechanical quality factor (Q factor) of resonators, which achieved as high as 2.89 million for n = 2 wineglass modes after being coated with PZT thin film electrodes.

Spatial coating inhomogeneity of highly reflective mirrors determined by cavity ringdown measurements.

The inhomogeneity of high-reflectivity mirror coatings is a potential error source in the application of the cavity ringdown technique. Here, the ringdown times for different transverse modes were recorded. Together with the observed spatial distribution of these modes the ringdown times can be used to approximately locate the position of coating defects.

Reanalysis of generalized sensitivity factors for optical-axis perturbation in nonplanar ring resonators.

By utilizing the novel coordinate system for Gaussian beam reflection and the generalized ray matrix for spherical mirror reflection, the generalized sensitivity factors SD1, ST1, SD2 and ST2 influenced by both the radial and axial displacements of a spherical mirror in a nonplanar ring resonator have been obtained. Besides, the singular points of different kinds of non-planar ring resonators under the conditions of incident angle A ranging from 0° to 45° or total coordinate rotation angle ρ ranging from 0° to 360° have also been obtained through the analysis of the determinant of the coefficient matrix of the linear equations. The analysis in this paper is important to the cavity design of non-planar ring resonators and it could be helpful to avoid the violent movement of the optical-axis to small misalignment of the mirrors in non-planar ring resonators.

A developed optical-feedback cavity ring-down spectrometer and its application.

A developed spectrometer based on optical-feedback cavity ring-down spectroscopy (OF-CRDS) has been demonstrated with a distributed feedback laser diode and a V-shaped glass ceramic cavity. The laser is coupled to the V-shaped cavity, which creates an absorption path length greater than 2.8 km, and resonance between the laser frequency and the cavity modes is realized by modulating the cavity length instead of tuning the laser wavelength to obtain a higher resolution.

Nanosecond square high voltage pulse generator for electro-optic switch.

A scalable square high voltage pulse generator, which has the properties of fast rise time, fast fall time, powerful driving capability, and long lifetime, is presented in this paper by utilizing solid state circuitry. A totem-pole topology is designed to supply a powerful driving capability for the electro-optic (EO) crystal which is of capacitive load. Power MOSFETs are configured in series to sustain high voltage, and proper driving circuits are introduced for the specific MOSFETs configurations.

Precise wavelength calibration in continuous-wave cavity ringdown spectroscopy based on the HITRAN database.

We describe the wavelength calibration method of a narrowband laser diode in continuous-wave (CW) cavity ringdown spectroscopy (CRDS). The method uses known spectral lines as wavelength markers to calibrate and refine the wavelength-current relation of laser diodes, and their spectral positions are taken directly from the HITRAN 2004 database. We built a compact CW CRDS apparatus with a 1.

[Monthly changes in caloric values of five shrubby Palmae species leaves].

Studies on the monthly changes in the ash contents and caloric values of 5 shrubby Palmae species (Chamaerops humilis, Rhapis gracilis, Sabal minor, Chamaedorea cataractarum, Chamaedorea brachypoda) leaves showed that annual average ash content of the five shrubby species was 4.87% +/- 1.37% for Chamaerops humilis, 8.