Harnessing Defects in SnSe Film via Photo-Induced Doping for Fully Light-Controlled Artificial Synapse.

2D-layered materials are recognized as up-and-coming candidates to overcome the intrinsic physical limitation of silicon-based devices. Herein, the coexistence of positive persistent photoconductivity (PPPC) and negative persistent photoconductivity (NPPC) in SnSe thin films prepared by pulsed laser deposition provides an excellent avenue for engineering novel devices. It is determined that surface oxygen is co-regulated by physisorption and chemisorption, and the NPPC is attributed to the photo-controllable oxygen desorption behavior.

Multifunctional Smart Fabrics with Integration of Self-Cleaning, Energy Harvesting, and Thermal Management Properties.

Due to their good wearability, smart fabrics have gradually developed into one of the important components of multifunctional flexible electronics. Nevertheless, function integration is typically accomplished through the intricate stacking of diverse modules, which inevitably compromises comfort and elevates processing complexities. The integration of these discrete functional modules into a unified design for smart fabrics represents a superior solution.

Molecular Filter Net Synergy with Regulation in Ion Percolation for High-Performance Zn Metal Batteries.

The uncontrollable dendrite growth and complex parasitic reactions of Zn metal anodes cause short cycle lives and low Coulombic efficiency, which seriously affect their applications. To address these issues, this research proposes an efficient ion percolating interface constituted by a hydrogen-bonded organic framework (HND) for a highly stable and reversible Zn anode. The hydrogen-bonded skeleton acts as a molecular filter net, capturing water molecules by forming targeted hydrogen-bonding systems with them, sufficiently inhibiting parasitic reactions.

Blue Perovskite Lasing Derived from Bound Excitons through Defect Engineering.

All-inorganic perovskite films have emerged as promising candidates for laser gain materials owing to their outstanding optoelectronic properties and straightforward solution processing. However, the performance of blue perovskite lasing still lags far behind due to the inevitable high density of defects. Herein, we demonstrate that defects can be utilized instead of passivated/removed to form bound excitons to achieve excellent blue stimulated emission in perovskite films.

Electronically Reconfigurable Memristive Neuron Capable of Operating in Both Excitation and Inhibition Modes.

Threshold switching (TS) memristors are promising candidates for artificial neurons in neuromorphic systems. However, they often lack biological plausibility, typically functioning solely in an excitation mode. The absence of an inhibitory mode limits neurons' ability to synergistically process both excitatory and inhibitory synaptic signals.

Thermal management towards ultra-bright and stable perovskite nanocrystal-based pure red light-emitting diodes.

Despite the promising candidacy of perovskite nanocrystals for light-emitting diodes, their pure red electroluminescence is hindered by low saturated luminance, severe external quantum efficiency roll-off, and inferior operational stability. Here, we report ultra-bright and stable pure red light-emitting diodes by manipulating Joule heat generation in the nanocrystal emissive layer and thermal management within the device. Diphenylphosphoryl azide-mediated regulation of the nanocrystal surface synergistically enhances the optical properties and carrier transport of the emissive layer, enabling reduced Joule heat generation and thus lowering the working temperature.

Highly efficient blue light-emitting diodes based on mixed-halide perovskites with reduced chlorine defects.

Perovskite light-emitting diodes (PeLEDs) provide excellent opportunities for low-cost, color-saturated, and large-area displays. However, the performance of blue PeLEDs lags far behind that of their green and red counterparts. Here, we show that the external quantum efficiencies (EQEs) of blue PeLEDs scale linearly with the photoluminescence quantum yields (PL QYs) of CsPb(BrCl) nanocrystals emitting at 460 to 480 nm.

Theoretical Understanding of Electromigration-Related Surface Diffusion and Current-Induced Force in Ag-Pd Systems.

Electromigration, as a common reason for interconnect failure, is becoming increasingly important in the ongoing decrease in the integrated circuit manufacturing process. A study is being carried out utilizing the ab initio calculational method to gain a deeper understanding of electromigration, with a focus on the atom diffusion process in the Ag-Pd alloy system, a commonly used interconnect material. We begin by establishing that the primary mechanism of diffusion is step-edge diffusion on the (111) surface.

Monoammonium Modified Dion-Jacobson Quasi-2D Perovskite for High Efficiency Pure-Blue Light Emitting Diodes.

Quasi-2D perovskites exhibit impressive optoelectronic properties and hold significant promise for future light-emitting devices. However, the efficiency of perovskite light-emitting diodes (PeLEDs) is seriously limited by defect-induced nonradiative recombination and imbalanced charge injection. Here, the defect states are passivated and charge injection balance is effectively improved by introducing the additive cyclohexanemethylammonium (CHMA) to bromide-based Dion-Jacobson (D-J) structure quasi-2D perovskite emission layer.

Ferrocene Derivatives for Photothermal Applications.

Ferrocene (Fc) and Fc derivatives have gained popularity in recent years due to their unique structure and characteristics. Among Fc's diverse performances, photothermal conversion, as a primary source of energy conversion, has sparked substantial study attention. This Review summaries Fc and Fc derivatives with photothermal characteristics, as well as their applications developed recently.

A Reconfigurable All-Optical-Controlled Synaptic Device for Neuromorphic Computing Applications.

Retina-inspired visual sensors play a crucial role in the realization of neuromorphic visual systems. Nevertheless, significant obstacles persist in the pursuit of achieving bidirectional synaptic behavior and attaining high performance in the context of photostimulation. In this study, we propose a reconfigurable all-optical controlled synaptic device based on the IGZO/SnO/SnS heterostructure, which integrates sensing, storage and processing functions.

Fabrication of Flower-Shaped SbS/FeO Heterostructures for Enhanced Photoelectrochemical Performance.

Antimony sulfide (SbS) has been recognized as a catalytic material for splitting water by solar energy because of its suitable narrow band gap, high absorption coefficient, and abundance of elements. However, many deep-level defects in SbS result in a significant recombination of photoexcited electron-hole pairs, weakening its photoelectrochemical performance. Here, by using a simple hydrothermal and spin-coating method, we fabricated a step-scheme heterojunction of SbS/α-FeO to improve the photoelectrochemical performance of pure SbS.

Intercalation-Induced Localized Conversion Reaction in h-CuSe for Ultrafast-Rechargeable and Long-Cycling Sodium Metal Battery.

Cathode materials of sodium-based batteries with high specific capacity and fast charge-discharge mode, as well as ultralong reversible cycles at wide applied temperatures, are essential for future development of advanced energy storage system. Developing transition metal selenides with intercalation features provides a new strategy for realizing the above cathode materials. Herein, this work reports a storage mechanism of sodium ion in hexagonal CuSe (h-CuSe) based on the density functional theory (DFT) guidance.

Nanosurface-reconstructed perovskite for highly efficient and stable active-matrix light-emitting diode display.

Perovskite quantum dots (QDs) are promising for various photonic applications due to their high colour purity, tunable optoelectronic properties and excellent solution processability. Surface features impact their optoelectronic properties, and surface defects remain a major obstacle to progress. Here we develop a strategy utilizing diisooctylphosphinic acid-mediated synthesis combined with hydriodic acid-etching-driven nanosurface reconstruction to stabilize CsPbI QDs.

Efficient and bright broadband electroluminescence based on environment-friendly metal halide nanoclusters.

Broadband electroluminescence based on environment-friendly emitters is promising for healthy lighting yet remains an unprecedented challenge to progress. The copper halide-based emitters are competitive candidates for broadband emission, but their high-performance electroluminescence shows inadequate broad emission bandwidth of less than 90 nm. Here, we demonstrate efficient ultra-broadband electroluminescence from a copper halide (CuI) nanocluster single emitter prepared by a one-step solution synthesis-deposition process, through dedicated design of ligands and subtle selection of solvents.

Controlling Interfacial Amidation Reaction Rate to Regulate Crystal Growth toward High-Performance FAPbBr-Based Inverted Light-Emitting Diodes.

Controlling interfacial reactions is critical for zinc oxide (ZnO)-based inverted perovskite light-emitting diodes (PeLEDs), boosting the external quantum efficiency (EQE) of the near-infrared device to above 20%. However, violent interfacial reactions between the bromine-based perovskites and ZnO-based films severely limit the performance of inverted green PeLEDs, whose efficiency and stability lag far behind those of their near-infrared counterparts. Here, a controllable interfacial amidation between the bromine-based perovskites and magnesium-doped ZnO (ZnMgO) film utilizing caprylyl sulfobetaine (SFB) is realized.

Epitaxial Growth of CsPbBr Pyramids/CdS Nanobelt Heterostructures for High-Performance Photodetectors.

Perovskites have great potential for optoelectronic applications due to their high photoluminescence quantum yield, large absorption coefficient, great defect tolerance, and adjustable band gap. Perovskite heterostructures may further enhance the performance of optoelectronic devices. So far, however, most of perovskite heterostructures are fabricated by mechanical stacking or spin coating, which could introduce a large number of defects or impurities at the heterointerface owing to the random stacking process.

Self-Competitive Growth of CsPbBr Planar Nanowire Array.

Semiconductor planar nanowire arrays (PNAs) are essential for achieving large-scale device integration. Direct heteroepitaxy of PNAs on a flat substrate is constrained by the mismatch in crystalline symmetry and lattice parameters between the substrate and epitaxial nanowires. This study presents a novel approach termed "self-competitive growth" for heteroepitaxy of CsPbBr PNAs on mica.

High-Performance All-Inorganic Architecture Perovskite Light-Emitting Diodes Based on Tens-of-Nanometers-Sized CsPbBr Emitters in a Carrier-Confined Heterostructure.

Developing green perovskite light-emitting diodes (PeLEDs) with a high external quantum efficiency (EQE) and low efficiency roll-off at high brightness remains a critical challenge. Nanostructured emitter-based devices have shown high efficiency but restricted ascending luminance at high current densities, while devices based on large-sized crystals exhibit low efficiency roll-off but face great challenges to high efficiency. Herein, we develop an all-inorganic device architecture combined with utilizing tens-of-nanometers-sized CsPbBr (TNS-CsPbBr) emitters in a carrier-confined heterostructure to realize green PeLEDs that exhibit high EQEs and low efficiency roll-off.

Anodic Electrodepositing Bioinspired Cu-BDC-NH@Graphene Oxide Membrane for Efficient Uranium Extraction.

The challenge of removing trace levels of heavy metal ions, particularly uranium, from wastewater is a critical concern in environmental management. Uranium, a key element in long-term nuclear power generation, often poses significant extraction difficulties in wastewater due to its low concentration, interference from other ions, and the complexity of aquatic ecosystems. This study introduces an anodic electrodeposited hierarchical porous 2D metal-organic framework (MOF) Cu-BDC-NH@graphene oxide (GO) membrane for effective uranium extraction by mimicking the function of the superb-uranyl-binding protein.

A HO Oxidation Approach to TiC/TiO for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

To develop versatile photocatalysts for efficient degradation of distinct organic pollutants in water is a continuous pursuit in environment remediation. Herein, we directly oxidize TiC MXene with hydrogen peroxide to produce C-doped anatase TiO nanowires with aggregates maintaining a layered architecture of the MXene. The TiC MXene provides a titanium source for TiO, a carbon source for in situ C-doping, and templates for nanowire aggregates.

Ultrasensitive and Exclusive Chemiresistors with a ZIF-67-Derived Oxide Cage/Nanofiber CoO/InO Heterostructure for Acetone Detection.

Gas sensors for acetone detection have received considerable attention because acetone has a significant influence on both the environment and human health, e.g., it is flammable and toxic and may be related to blood glucose levels.

Nucleophilic Reaction-Enabled Chloride Modification on CsPbI Quantum Dots for Pure Red Light-Emitting Diodes with Efficiency Exceeding 26 .

High-performance pure red perovskite light-emitting diodes (PeLEDs) with an emission wavelength shorter than 650 nm are ideal for wide-color-gamut displays, yet remain an unprecedented challenge to progress. Mixed-halide CsPb(Br/I) emitter-based PeLEDs suffer spectral stability induced by halide phase segregation and CsPbI quantum dots (QDs) suffer from a compromise between emission wavelength and electroluminescence efficiency. Here, we demonstrate efficient pure red PeLEDs with an emission centered at 638 nm based on PbCl -modified CsPbI QDs.

Design of Ion Channel Confined Binary Metal Cu-Fe Selenides for All-Climate, High-Capacity Sodium Ion Batteries.

Exploring special anode materials with high capacity, stable structure, and extreme temperature feasibility remains a great challenge in secondary sodium based energy systems. Here, a bimetallic Cu-Fe selenide nanosheet with refined nanostructure providing confined internal ion transport channels are reported, in which the structure improves the pseudocapacitance and reduces the charge transfer resistance for making a significant contribution to accelerating the reaction dynamics. The CuFeSe nanosheets have a high initial specific capacity of 480.

Atomic Pinning of Trace Additives Induces Interfacial Solvation for Highly Reversible Zn Metal Anodes.

Aqueous Zn metal batteries are considered promising energy storage devices due to their high energy density and low cost. Unfortunately, such great potential is at present obscured by two clouds called dendrite growth and parasitic reactions. Herein, trace amounts of sodium cyclamate (CYC-Na) are introduced as an electrolyte additive, and accordingly, an atomic-pinning-induced interfacial solvation mechanism is proposed to summarize the effect of trace addition.